configure.ac 51 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512
  1. # StarPU --- Runtime system for heterogeneous multicore architectures.
  2. #
  3. # Copyright (C) 2009, 2010, 2011 Université de Bordeaux 1
  4. # Copyright (C) 2010, 2011 Centre National de la Recherche Scientifique
  5. # Copyright (C) 2011 Télécom-SudParis
  6. # Copyright (C) 2011 Institut National de Recherche en Informatique et Automatique
  7. #
  8. # StarPU is free software; you can redistribute it and/or modify
  9. # it under the terms of the GNU Lesser General Public License as published by
  10. # the Free Software Foundation; either version 2.1 of the License, or (at
  11. # your option) any later version.
  12. #
  13. # StarPU is distributed in the hope that it will be useful, but
  14. # WITHOUT ANY WARRANTY; without even the implied warranty of
  15. # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  16. #
  17. # See the GNU Lesser General Public License in COPYING.LGPL for more details.
  18. AC_INIT([StarPU],1.0.0, [starpu-devel@lists.gforge.inria.fr], starpu)
  19. AC_CONFIG_SRCDIR(include/starpu.h)
  20. AC_CONFIG_AUX_DIR([build-aux])
  21. dnl Versioning.
  22. STARPU_MAJOR_VERSION="`echo $PACKAGE_VERSION | cut -d . -f 1`"
  23. STARPU_MINOR_VERSION="`echo $PACKAGE_VERSION | cut -d . -f 2`"
  24. STARPU_EFFECTIVE_VERSION="$STARPU_MAJOR_VERSION.$STARPU_MINOR_VERSION"
  25. AC_SUBST([STARPU_MAJOR_VERSION])
  26. AC_SUBST([STARPU_MINOR_VERSION])
  27. AC_SUBST([STARPU_EFFECTIVE_VERSION])
  28. AC_DEFINE_UNQUOTED([STARPU_MAJOR_VERSION], [$STARPU_MAJOR_VERSION],
  29. [Major version number of StarPU.])
  30. AC_DEFINE_UNQUOTED([STARPU_MINOR_VERSION], [$STARPU_MINOR_VERSION],
  31. [Major version number of StarPU.])
  32. . "$srcdir/STARPU-VERSION"
  33. AC_SUBST([LIBSTARPU_INTERFACE_CURRENT])
  34. AC_SUBST([LIBSTARPU_INTERFACE_REVISION])
  35. AC_SUBST([LIBSTARPU_INTERFACE_AGE])
  36. AC_CANONICAL_SYSTEM
  37. dnl Automake 1.11 introduced `silent-rules' and `color-tests'. Use them
  38. dnl when they're available.
  39. m4_ifdef([AM_SILENT_RULES],
  40. [AM_INIT_AUTOMAKE([1.11 -Wall -Werror foreign silent-rules color-tests])],
  41. [AM_INIT_AUTOMAKE([1.10 -Wall -Werror foreign])])
  42. AC_PREREQ(2.60)
  43. AC_PROG_CC
  44. AC_PROG_CPP
  45. AC_PROG_SED
  46. AC_PROG_LN_S
  47. AC_PROG_F77
  48. LT_PREREQ([2.2])
  49. LT_INIT([win32-dll])
  50. AC_PROG_INSTALL
  51. AC_PROG_MKDIR_P
  52. AC_PROG_LN_S
  53. AC_HEADER_STDC
  54. AC_C_RESTRICT
  55. AC_PATH_PROGS([STARPU_MS_LIB], [lib])
  56. AC_ARG_VAR([STARPU_MS_LIB], [Path to Microsoft's Visual Studio `lib' tool])
  57. AM_CONDITIONAL([STARPU_HAVE_MS_LIB], [test "x$STARPU_MS_LIB" != "x"])
  58. case "$target" in
  59. *-*-mingw*|*-*-cygwin*)
  60. starpu_windows=yes
  61. libext=a
  62. AC_DEFINE(STARPU_HAVE_WINDOWS, [], [Define this on windows.])
  63. ;;
  64. esac
  65. AM_CONDITIONAL([STARPU_HAVE_WINDOWS], [test "x$starpu_windows" = "xyes"])
  66. # on Darwin, GCC targets i386 by default, so we don't have atomic ops
  67. AC_CHECK_SIZEOF([void *])
  68. SIZEOF_VOID_P=$ac_cv_sizeof_void_p
  69. if test x$SIZEOF_VOID_P = x4; then
  70. case "$target" in
  71. i386-*darwin*) CFLAGS+=" -march=i686 " ;;
  72. esac
  73. fi
  74. # Get the version of StarPU that we are installing
  75. STARPU_VERSION=10000
  76. AC_SUBST(STARPU_VERSION)
  77. AC_DEFINE_UNQUOTED([STARPU_VERSION], [$STARPU_VERSION], [Version of StarPU])
  78. # This will be useful for program which use CUDA (and .cubin files) which need
  79. # some path to the CUDA code at runtime.
  80. AC_DEFINE_UNQUOTED(STARPU_BUILD_DIR, "$PWD", [location of StarPU build directory])
  81. AC_SUBST(STARPU_BUILD_DIR, $PWD)
  82. case "${srcdir}" in
  83. /*) AC_DEFINE_UNQUOTED(STARPU_SRC_DIR, "$(eval echo ${srcdir})", [location of StarPU sources])
  84. AC_SUBST(STARPU_SRC_DIR, "$(eval echo ${srcdir})") ;;
  85. *) AC_DEFINE_UNQUOTED(STARPU_SRC_DIR, "$(eval echo $PWD/${srcdir})", [location of StarPU sources])
  86. AC_SUBST(STARPU_SRC_DIR, "$(eval echo $PWD/${srcdir})") ;;
  87. esac
  88. AC_CHECK_LIB([pthread], [pthread_create])
  89. AC_COMPILE_IFELSE(
  90. AC_LANG_PROGRAM([[
  91. #include <pthread.h>
  92. ]], [[ pthread_t t; pthread_create(&t, NULL, NULL, NULL); ]]),,
  93. AC_MSG_ERROR([pthread_create unavailable]))
  94. AC_SEARCH_LIBS([sqrt],[m],,AC_MSG_ERROR([math library unavailable]))
  95. AC_HAVE_LIBRARY([ws2_32])
  96. AC_CHECK_FUNCS([sysconf])
  97. AC_CHECK_FUNC([pthread_spin_lock], have_pthread_spin_lock=yes, have_pthread_spin_lock=no)
  98. if test x$have_pthread_spin_lock = xyes; then
  99. AC_DEFINE(HAVE_PTHREAD_SPIN_LOCK,[],[pthread_spin_lock is available])
  100. fi
  101. # yes, that's non portable, but it's still better than sched_setaffinity
  102. AC_CHECK_FUNCS(pthread_setaffinity_np)
  103. # There is no posix_memalign on Mac OS X, only memalign
  104. AC_CHECK_FUNCS([posix_memalign], [AC_DEFINE([STARPU_HAVE_POSIX_MEMALIGN], [1], [Define to 1 if you have the `posix_memalign' function.])])
  105. AC_CHECK_FUNCS([memalign], [AC_DEFINE([STARPU_HAVE_MEMALIGN], [1], [Define to 1 if you have the `memalign' function.])])
  106. # Some systems don't have drand48
  107. AC_CHECK_FUNC([drand48], have_drand48=yes, have_drand48=no)
  108. # Maybe the user still does not want to use the provided drand48
  109. AC_ARG_ENABLE(default-drand48, [AS_HELP_STRING([--disable-default-drand48],
  110. [Do not use the default version of drand48])],
  111. enable_default_drand48=$enableval, enable_default_drand48=yes)
  112. if test x$have_drand48 = xyes -a x$enable_default_drand48 = xyes ; then
  113. AC_DEFINE([starpu_srand48(seed)],[srand48(seed)],[srand48 equivalent function])
  114. AC_DEFINE([starpu_drand48()],[drand48()],[drand48 equivalent function])
  115. AC_DEFINE([starpu_erand48(xsubi)],[erand48(xsubi)],[erand48 equivalent function])
  116. AC_DEFINE([starpu_srand48_r(seed, buffer)],[srand48_r(seed, buffer)],[srand48_r equivalent function])
  117. AC_DEFINE([starpu_erand48_r(xsubi, buffer, result)],[erand48_r(xsubi, buffer, result)],[erand48_r equivalent function])
  118. else
  119. AC_DEFINE([starpu_srand48(seed)],[srand(seed)],[srand48 equivalent function])
  120. AC_DEFINE([starpu_drand48()],[((double)(rand()) / RAND_MAX)],[drand48 equivalent function])
  121. AC_DEFINE([starpu_erand48(xsubi)],[starpu_drand48()],[erand48 equivalent function])
  122. AC_DEFINE([starpu_srand48_r(seed, buffer)],[srand((unsigned int)seed)],[srand48_r equivalent function])
  123. AC_DEFINE([starpu_erand48_r(xsubi, buffer, result)],[do {*(result) = ((double)(rand()) / RAND_MAX);} while (0);],[erand48_r equivalent function])
  124. fi
  125. # Define slow machine
  126. AC_ARG_ENABLE(slow-machine, [AS_HELP_STRING([--enable-slow-machine],
  127. [Lower default values for the testcases run by make check])],
  128. enable_slow_machine=$enableval, enable_slow_machine=false)
  129. if test x$enable_slow_machine = xyes; then
  130. AC_DEFINE(STARPU_SLOW_MACHINE, [1], [enable slow machine])
  131. fi
  132. AC_CHECK_HEADERS([malloc.h], [AC_DEFINE([STARPU_HAVE_MALLOC_H], [1], [Define to 1 if you have the <malloc.h> header file.])])
  133. # This defines HAVE_SYNC_VAL_COMPARE_AND_SWAP
  134. STARPU_CHECK_SYNC_VAL_COMPARE_AND_SWAP
  135. # This defines HAVE_SYNC_BOOL_COMPARE_AND_SWAP
  136. STARPU_CHECK_SYNC_BOOL_COMPARE_AND_SWAP
  137. # This defines HAVE_SYNC_FETCH_AND_ADD
  138. STARPU_CHECK_SYNC_FETCH_AND_ADD
  139. # This defines HAVE_SYNC_FETCH_AND_OR
  140. STARPU_CHECK_SYNC_FETCH_AND_OR
  141. # This defines HAVE_SYNC_LOCK_TEST_AND_SET
  142. STARPU_CHECK_SYNC_LOCK_TEST_AND_SET
  143. # This defines HAVE_SYNC_SYNCHRONIZE
  144. STARPU_CHECK_SYNC_SYNCHRONIZE
  145. CPPFLAGS="${CPPFLAGS} -D_GNU_SOURCE "
  146. STARPU_SEARCH_LIBS([LIBNUMA],[set_mempolicy],[numa],[enable_libnuma=yes],[enable_libnuma=no])
  147. AC_MSG_CHECKING(whether libnuma is available)
  148. AC_MSG_RESULT($enable_libnuma)
  149. if test x$enable_libnuma = xyes; then
  150. AC_DEFINE(STARPU_HAVE_LIBNUMA,[],[libnuma is available])
  151. fi
  152. ###############################################################################
  153. # #
  154. # CPUs settings #
  155. # #
  156. ###############################################################################
  157. AC_MSG_CHECKING(maximum number of CPUs)
  158. AC_ARG_ENABLE(maxcpus, [AS_HELP_STRING([--enable-maxcpus=<number>],
  159. [maximum number of CPUs])],
  160. maxcpus=$enableval, maxcpus=16)
  161. AC_MSG_RESULT($maxcpus)
  162. AC_DEFINE_UNQUOTED(STARPU_MAXCPUS, [$maxcpus], [Maximum number of CPUs supported])
  163. AC_MSG_CHECKING(whether CPUs should be used)
  164. AC_ARG_ENABLE(cpu, [AS_HELP_STRING([--disable-cpu],
  165. [do not use the CPU(s)])],
  166. enable_cpu=$enableval, enable_cpu=yes)
  167. AC_MSG_RESULT($enable_cpu)
  168. AC_SUBST(STARPU_USE_CPU, $enable_cpu)
  169. AM_CONDITIONAL(STARPU_USE_CPU, test x$enable_cpu = xyes)
  170. if test x$enable_cpu = xyes; then
  171. AC_DEFINE(STARPU_USE_CPU, [1], [CPU driver is activated])
  172. fi
  173. # How many parallel worker can we support ?
  174. nmaxcombinedworkers=`expr 2 \* $maxcpus`
  175. AC_DEFINE_UNQUOTED(STARPU_NMAX_COMBINEDWORKERS,
  176. [$nmaxcombinedworkers], [Maximum number of worker combinations])
  177. ###############################################################################
  178. # #
  179. # CUDA settings #
  180. # #
  181. ###############################################################################
  182. AC_MSG_CHECKING(maximum number of CUDA devices)
  183. AC_ARG_ENABLE(maxcudadev, [AS_HELP_STRING([--enable-maxcudadev=<number>],
  184. [maximum number of CUDA devices])],
  185. nmaxcudadev=$enableval, nmaxcudadev=4)
  186. AC_MSG_RESULT($nmaxcudadev)
  187. AC_DEFINE_UNQUOTED(STARPU_MAXCUDADEVS, [$nmaxcudadev],
  188. [maximum number of CUDA devices])
  189. AC_ARG_ENABLE(cuda, [AS_HELP_STRING([--disable-cuda],
  190. [do not use CUDA device(s)])],, [enable_cuda=maybe])
  191. #AC_MSG_CHECKING(whether CUDA is available)
  192. AC_ARG_WITH(cuda-dir,
  193. [AS_HELP_STRING([--with-cuda-dir=<path>],
  194. [specify CUDA installation directory])],
  195. [
  196. cuda_dir="$withval"
  197. # in case this was not explicit yet
  198. enable_cuda=yes
  199. ], cuda_dir=no)
  200. AC_ARG_WITH(cuda-include-dir,
  201. [AS_HELP_STRING([--with-cuda-include-dir=<path>],
  202. [specify where CUDA headers are installed])],
  203. [
  204. cuda_include_dir="$withval"
  205. # in case this was not explicit yet
  206. enable_cuda=yes
  207. ], [cuda_include_dir=no])
  208. AC_ARG_WITH(cuda-lib-dir,
  209. [AS_HELP_STRING([--with-cuda-lib-dir=<path>],
  210. [specify where CUDA libraries are installed])],
  211. [
  212. cuda_lib_dir="$withval"
  213. # in case this was not explicit yet
  214. enable_cuda=yes
  215. ], [cuda_lib_dir=no])
  216. AC_DEFUN([STARPU_CHECK_CUDA],
  217. [
  218. __cuda_dir=$1
  219. __cuda_lib_dir=$2
  220. if test "$__cuda_dir" != "no" ; then
  221. AC_MSG_CHECKING(whether CUDA is available in $__cuda_dir)
  222. else
  223. AC_MSG_CHECKING(whether CUDA is available)
  224. fi
  225. AC_MSG_RESULT()
  226. if test "$__cuda_lib_dir" = "no" -a "$__cuda_dir" != "no" ; then
  227. __cuda_lib_dir="$__cuda_dir/lib"
  228. fi
  229. SAVED_LDFLAGS="${LDFLAGS}"
  230. if test "$__cuda_dir" != "no" ; then
  231. STARPU_CUDA_LDFLAGS="-L${__cuda_lib_dir}"
  232. LDFLAGS="${SAVED_LDFLAGS} -L${__cuda_lib_dir}"
  233. fi
  234. AC_HAVE_LIBRARY([cuda],[have_valid_cuda=yes],[have_valid_cuda=no])
  235. unset ac_cv_lib_cuda_main
  236. if test "$have_valid_cuda" = "no" ; then
  237. if test "$__cuda_dir" != "no" ; then
  238. STARPU_CUDA_LDFLAGS="-L${__cuda_dir}/lib64"
  239. LDFLAGS="${SAVED_LDFLAGS} -L${__cuda_dir}/lib64"
  240. AC_HAVE_LIBRARY([cuda],[have_valid_cuda=yes],[have_valid_cuda=no])
  241. unset ac_cv_lib_cuda_main
  242. fi
  243. fi
  244. if test "$have_valid_cuda" = "no" ; then
  245. LDFLAGS="${SAVED_LDFLAGS}"
  246. unset STARPU_CUDA_LDFLAGS
  247. fi
  248. ])
  249. AC_DEFUN([STARPU_CHECK_CUDA_RUNTIME],
  250. [
  251. __cuda_dir=$1
  252. __cuda_include_dir=$2
  253. __cuda_lib_dir=$3
  254. if test "$__cuda_dir" != "no" -a "$__cuda_dir" != "" ; then
  255. AC_MSG_CHECKING(whether CUDA RT is available in $__cuda_dir)
  256. else
  257. AC_MSG_CHECKING(whether CUDA RT is available)
  258. fi
  259. AC_MSG_RESULT()
  260. if test "$__cuda_include_dir" = "no" -a "$__cuda_dir" != "no" ; then
  261. __cuda_include_dir="$__cuda_dir/include"
  262. fi
  263. if test "$__cuda_lib_dir" = "no" -a "$__cuda_dir" != "no" ; then
  264. __cuda_lib_dir="$__cuda_dir/lib"
  265. fi
  266. SAVED_CPPFLAGS="$CPPFLAGS"
  267. SAVED_LDFLAGS="${LDFLAGS}"
  268. SAVED_STARPU_CUDA_LDFLAGS=${STARPU_CUDA_LDFLAGS}
  269. if test "$__cuda_lib_dir" != "no" ; then
  270. STARPU_CUDA_LDFLAGS="${SAVED_STARPU_CUDA_LDFLAGS} -L$__cuda_lib_dir"
  271. fi
  272. if test "$__cuda_include_dir" != "no" ; then
  273. CPPFLAGS="${CPPFLAGS} -I$__cuda_include_dir"
  274. fi
  275. AC_CHECK_HEADER([cuda.h],[have_valid_cuda=yes],[have_valid_cuda=no])
  276. unset ac_cv_header_cuda_h
  277. if test "$have_valid_cuda" = "yes" ; then
  278. if test "$__cuda_lib_dir" != "no"; then
  279. LDFLAGS="${SAVED_LDFLAGS} -L$__cuda_lib_dir"
  280. fi
  281. AC_HAVE_LIBRARY([cudart],[have_valid_cuda=yes],[have_valid_cuda=no])
  282. unset ac_cv_lib_cudart_main
  283. if test "$have_valid_cuda" = "no" ; then
  284. if test "$3" = "no" -a "$__cuda_dir" != "no" ; then
  285. __cuda_lib_dir="$__cuda_dir/lib64"
  286. LDFLAGS="${SAVED_LDFLAGS} -L$__cuda_lib_dir"
  287. STARPU_CUDA_LDFLAGS="${SAVED_STARPU_CUDA_LDFLAGS} -L$__cuda_lib_dir"
  288. AC_HAVE_LIBRARY([cudart],[have_valid_cuda=yes],[have_valid_cuda=no])
  289. unset ac_cv_lib_cudart_main
  290. fi
  291. fi
  292. fi
  293. if test "$have_valid_cuda" = "yes" ; then
  294. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lcudart"
  295. LDFLAGS="${SAVED_LDFLAGS} ${STARPU_CUDA_LDFLAGS}"
  296. # we also check that CUBLAS is available
  297. AC_HAVE_LIBRARY([cublas],[have_valid_cuda=yes],[have_valid_cuda=no])
  298. unset ac_cv_lib_cublas_main
  299. if test "$have_valid_cuda" = "yes" ; then
  300. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lcublas"
  301. fi
  302. fi
  303. CPPFLAGS="${SAVED_CPPFLAGS}"
  304. LDFLAGS="${SAVED_LDFLAGS}"
  305. if test "$have_valid_cuda" = "yes" -a "$__cuda_include_dir" != "no"; then
  306. STARPU_CUDA_CPPFLAGS="-I$__cuda_include_dir"
  307. NVCCFLAGS="${NVCCFLAGS} -I$__cuda_include_dir"
  308. fi
  309. ])
  310. if test x$enable_cuda = xyes -o x$enable_cuda = xmaybe; then
  311. STARPU_CHECK_CUDA($cuda_dir, $cuda_lib_dir)
  312. if test "$have_valid_cuda" = "no" ; then
  313. for f in "/usr/local/cuda" "/c/cuda" "/cygdrive/c/cuda" "/opt/cuda" "$CUDA_INC_PATH/.." "$CUDA_INSTALL_PATH" "$CUDA_TOOLKIT"; do
  314. STARPU_CHECK_CUDA($f, "no")
  315. if test "$have_valid_cuda" = "yes" ; then
  316. break
  317. fi
  318. done
  319. fi
  320. if test "$have_valid_cuda" = "yes" ; then
  321. STARPU_CHECK_CUDA_RUNTIME($cuda_dir, $cuda_include_dir, $cuda_lib_dir)
  322. if test "$have_valid_cuda" = "no" ; then
  323. for f in "/usr/local/cuda" "/c/cuda" "/cygdrive/c/cuda" "/opt/cuda" "$CUDA_INC_PATH/.." "$CUDA_INSTALL_PATH" "$CUDA_TOOLKIT"; do
  324. STARPU_CHECK_CUDA_RUNTIME($f, "no", "no")
  325. if test "$have_valid_cuda" = "yes" ; then
  326. break
  327. fi
  328. done
  329. fi
  330. fi
  331. # in case CUDA was explicitely required, but is not available, this is an error
  332. if test x$enable_cuda = xyes -a x$have_valid_cuda = xno; then
  333. AC_MSG_ERROR([cannot find CUDA])
  334. fi
  335. # now we enable CUDA if and only if a proper setup is available
  336. enable_cuda=$have_valid_cuda
  337. fi
  338. if test x$enable_cuda = xyes; then
  339. AC_PATH_PROG([NVCC], [nvcc], [not-found],
  340. [$cuda_dir/bin:$PATH:/usr/local/cuda/bin:/usr/bin:/bin])
  341. if test "x$NVCC" = "xnot-found"; then
  342. AC_MSG_WARN(['nvcc' not found, disabling CUDA])
  343. enable_cuda=no
  344. fi
  345. fi
  346. AC_MSG_CHECKING(whether CUDA should be used)
  347. AC_MSG_RESULT($enable_cuda)
  348. AC_SUBST(STARPU_USE_CUDA, $enable_cuda)
  349. AM_CONDITIONAL(STARPU_USE_CUDA, test x$enable_cuda = xyes)
  350. if test x$enable_cuda = xyes; then
  351. AC_DEFINE(STARPU_USE_CUDA, [1], [CUDA support is activated])
  352. # On Darwin, the libstdc++ dependency is not automatically added by nvcc
  353. # case "$target" in
  354. # *-*darwin*) AC_HAVE_LIBRARY([stdc++], []) ;;
  355. # #*-*darwin*) AC_HAVE_LIBRARY([stdc++], [STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lstdc++"]) ;;
  356. # esac
  357. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lcuda"
  358. STARPU_CUFFT_LDFLAGS="-lcufft"
  359. if test "$F77" = "gfortran" ; then
  360. STARPU_CUDA_FORTRAN_LDFLAGS="-lgfortran"
  361. AC_SUBST(STARPU_CUDA_FORTRAN_LDFLAGS)
  362. fi
  363. #in case this is a 64bit setup, we tell nvcc to use a -m64 flag
  364. if test x$SIZEOF_VOID_P = x8; then
  365. NVCCFLAGS="${NVCCFLAGS} -m64"
  366. AC_SUBST(NVCCFLAGS)
  367. fi
  368. fi
  369. have_magma=no
  370. if test x$enable_cuda = xyes; then
  371. PKG_CHECK_MODULES([MAGMA], [magma], [
  372. AC_DEFINE([STARPU_HAVE_MAGMA], [1], [Define to 1 if you have the MAGMA library.])
  373. AC_SUBST([STARPU_HAVE_MAGMA], [1])
  374. have_magma=yes
  375. ], [:])
  376. fi
  377. AM_CONDITIONAL(STARPU_HAVE_MAGMA, [test x$have_magma = xyes])
  378. AC_MSG_CHECKING(whether MAGMA should be used)
  379. AC_MSG_RESULT($have_magma)
  380. # cufftDoubleComplex may not be available on an old CUDA setup
  381. AC_CHECK_TYPE(cufftDoubleComplex,
  382. [have_cufftdoublecomplex=yes],
  383. [have_cufftdoublecomplex=no], [#include <cufft.h>])
  384. AM_CONDITIONAL(STARPU_HAVE_CUFFTDOUBLECOMPLEX, test x$have_cufftdoublecomplex = xyes)
  385. if test x$have_cufftdoublecomplex = xyes; then
  386. AC_DEFINE(STARPU_HAVE_CUFFTDOUBLECOMPLEX, [1], [cufftDoubleComplex is available])
  387. fi
  388. # The CURAND library is only available since CUDA 3.2
  389. have_curand=$enable_cuda
  390. if test x$enable_cuda = xyes; then
  391. SAVED_LDFLAGS="${LDFLAGS}"
  392. LDFLAGS="${LDFLAGS} ${STARPU_CUDA_LDFLAGS}"
  393. AC_HAVE_LIBRARY([curand],[have_curand=yes],[have_curand=no])
  394. LDFLAGS="${SAVED_LDFLAGS}"
  395. fi
  396. AC_MSG_CHECKING(whether CURAND is available)
  397. AC_MSG_RESULT($have_curand)
  398. if test x$have_curand = xyes; then
  399. AC_DEFINE(STARPU_HAVE_CURAND,[1], [CURAND is available])
  400. STARPU_CURAND_LDFLAGS="$STARPU_CURAND_LDFLAGS -lcurand"
  401. AC_SUBST(STARPU_CURAND_LDFLAGS)
  402. fi
  403. # Peer transfers are only supported since CUDA 4.0
  404. # Disable them if user explicity wants to disable them
  405. AC_ARG_ENABLE(cuda_memcpy_peer, [AS_HELP_STRING([--disable-cuda-memcpy-peer], [do not allow peer transfers when using CUDA 4.0])],, [enable_cuda_memcpy_peer=yes])
  406. have_cuda_memcpy_peer=no
  407. if test x$enable_cuda_memcpy_peer = xyes -a x$enable_cuda = xyes ; then
  408. SAVED_LDFLAGS="${LDFLAGS}"
  409. LDFLAGS="${LDFLAGS} ${STARPU_CUDA_LDFLAGS}"
  410. AC_CHECK_FUNC([cudaMemcpyPeer], have_cuda_memcpy_peer=yes, have_cuda_memcpy_peer=no)
  411. LDFLAGS="${SAVED_LDFLAGS}"
  412. fi
  413. if test x$have_cuda_memcpy_peer = xyes; then
  414. AC_DEFINE(HAVE_CUDA_MEMCPY_PEER,[],[Peer transfers are supported in CUDA])
  415. fi
  416. if test x$enable_cuda = xyes; then
  417. if test x$starpu_windows != xyes ; then
  418. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lstdc++"
  419. fi
  420. AC_SUBST(STARPU_CUDA_LDFLAGS)
  421. AC_SUBST(STARPU_CUFFT_LDFLAGS)
  422. AC_SUBST(STARPU_CUDA_CPPFLAGS)
  423. fi
  424. ###############################################################################
  425. # #
  426. # OpenCL settings #
  427. # #
  428. ###############################################################################
  429. AC_MSG_CHECKING(maximum number of OpenCL devices)
  430. AC_ARG_ENABLE(maxopencldev, [AS_HELP_STRING([--enable-maxopencldev=<number>],
  431. [maximum number of OPENCL devices])],
  432. nmaxopencldev=$enableval, nmaxopencldev=8)
  433. AC_MSG_RESULT($nmaxopencldev)
  434. AC_DEFINE_UNQUOTED(STARPU_MAXOPENCLDEVS, [$nmaxopencldev],
  435. [maximum number of OPENCL devices])
  436. AC_ARG_ENABLE(opencl, [AS_HELP_STRING([--disable-opencl],
  437. [do not use OpenCL device(s)])],, [enable_opencl=maybe])
  438. AC_DEFUN([STARPU_CHECK_OPENCL],
  439. [
  440. __opencl_dir=$1
  441. __opencl_include_dir=$2
  442. __opencl_lib_dir=$3
  443. if test "$__opencl_dir" != "no" ; then
  444. AC_MSG_CHECKING(whether OpenCL is available in $__opencl_dir)
  445. else
  446. AC_MSG_CHECKING(whether OpenCL is available)
  447. fi
  448. AC_MSG_RESULT()
  449. if test "$__opencl_include_dir" = "no" -a "$__opencl_dir" != "no" ; then
  450. __opencl_include_dir="$__opencl_dir/include"
  451. fi
  452. if test "$__opencl_lib_dir" = "no" -a "$__opencl_dir" != "no" ; then
  453. __opencl_lib_dir="$__opencl_dir/lib"
  454. fi
  455. SAVED_CPPFLAGS="$CPPFLAGS"
  456. SAVED_LDFLAGS="${LDFLAGS}"
  457. if test "$__opencl_include_dir" != "no" ; then
  458. CPPFLAGS="${CPPFLAGS} -I$__opencl_include_dir"
  459. fi
  460. AC_CHECK_HEADER([CL/cl.h],[have_valid_opencl=yes],[have_valid_opencl=no])
  461. unset ac_cv_header_CL_cl_h
  462. if test "$have_valid_opencl" = "yes" ; then
  463. if test "$__opencl_lib_dir" != "no"; then
  464. LDFLAGS="${SAVED_LDFLAGS} -L$__opencl_lib_dir"
  465. fi
  466. AC_HAVE_LIBRARY([OpenCL],[have_valid_opencl=yes],[have_valid_opencl=no])
  467. unset ac_cv_lib_OpenCL_main
  468. if test "$have_valid_opencl" = "no" ; then
  469. if test "$3" = "no" -a "$__opencl_dir" != "no" ; then
  470. __opencl_lib_dir="$__opencl_dir/lib64"
  471. LDFLAGS="${SAVED_LDFLAGS} -L$__opencl_lib_dir"
  472. AC_HAVE_LIBRARY([OpenCL],[have_valid_opencl=yes],[have_valid_opencl=no])
  473. unset ac_cv_lib_OpenCL_main
  474. fi
  475. fi
  476. fi
  477. if test "$have_valid_opencl" = "yes" -a "$__opencl_include_dir" != "no"; then
  478. STARPU_OPENCL_CPPFLAGS="-I$__opencl_include_dir"
  479. AC_CHECK_HEADERS([CL/cl_ext.h])
  480. fi
  481. CPPFLAGS="${SAVED_CPPFLAGS}"
  482. LDFLAGS="${SAVED_LDFLAGS}"
  483. if test "$have_valid_opencl" = "yes" ; then
  484. if test "$__opencl_lib_dir" != "no"; then
  485. STARPU_OPENCL_LDFLAGS="-L$__opencl_lib_dir"
  486. fi
  487. STARPU_OPENCL_LDFLAGS="${STARPU_OPENCL_LDFLAGS} -lOpenCL"
  488. fi
  489. ])
  490. #AC_MSG_CHECKING(whether OpenCL is available)
  491. AC_ARG_WITH(opencl-dir,
  492. [AS_HELP_STRING([--with-opencl-dir=<path>],
  493. [specify OpenCL installation directory])],
  494. [
  495. opencl_dir="$withval"
  496. # in case this was not explicit yet
  497. enable_opencl=yes
  498. ], opencl_dir=no)
  499. AC_ARG_WITH(opencl-include-dir,
  500. [AS_HELP_STRING([--with-opencl-include-dir=<path>],
  501. [specify where OpenCL headers are installed])],
  502. [
  503. opencl_include_dir="$withval"
  504. # in case this was not explicit yet
  505. enable_opencl=yes
  506. ], [opencl_include_dir=no])
  507. AC_ARG_WITH(opencl-lib-dir,
  508. [AS_HELP_STRING([--with-opencl-lib-dir=<path>],
  509. [specify where OpenCL libraries are installed])],
  510. [
  511. opencl_lib_dir="$withval"
  512. # in case this was not explicit yet
  513. enable_opencl=yes
  514. ], [opencl_lib_dir=no])
  515. if test x$enable_opencl = xyes -o x$enable_opencl = xmaybe; then
  516. STARPU_CHECK_OPENCL($opencl_dir, $opencl_include_dir, $opencl_lib_dir)
  517. if test "$have_valid_opencl" = "no" ; then
  518. for f in "/usr/local/cuda" "/c/cuda" "/cygdrive/c/cuda" "/opt/cuda" "$CUDA_INC_PATH/.." "$CUDA_INSTALL_PATH" "$CUDA_TOOLKIT"; do
  519. if test -n $f ; then
  520. STARPU_CHECK_OPENCL($f, "no", "no")
  521. if test "$have_valid_opencl" = "yes" ; then
  522. break
  523. fi
  524. fi
  525. done
  526. fi
  527. # in case OpenCL was explicitely required, but is not available, this is an error
  528. if test x$enable_opencl = xyes -a x$have_valid_opencl = xno; then
  529. AC_MSG_ERROR([cannot find OpenCL])
  530. fi
  531. # now we enable OpenCL if and only if a proper setup is available
  532. enable_opencl=$have_valid_opencl
  533. fi
  534. AC_MSG_CHECKING(whether OpenCL should be used)
  535. AC_MSG_RESULT($enable_opencl)
  536. AC_SUBST(STARPU_USE_OPENCL, $enable_opencl)
  537. AM_CONDITIONAL(STARPU_USE_OPENCL, test x$enable_opencl = xyes)
  538. if test x$enable_opencl = xyes ; then
  539. AC_DEFINE(STARPU_USE_OPENCL, [1], [OpenCL support is activated])
  540. STARPU_OPENCL_CPPFLAGS="${STARPU_OPENCL_CPPFLAGS} -DSTARPU_OPENCL_DATADIR=${datarootdir}/starpu/opencl"
  541. AC_SUBST(STARPU_OPENCL_DATAdir, "$(eval echo ${datarootdir}/starpu/opencl/examples)")
  542. AC_SUBST(STARPU_OPENCL_CPPFLAGS)
  543. AC_SUBST(STARPU_OPENCL_LDFLAGS)
  544. fi
  545. ###############################################################################
  546. # #
  547. # Cell settings #
  548. # #
  549. ###############################################################################
  550. #TODO fix the default dir
  551. AC_ARG_ENABLE(gordon, [AS_HELP_STRING([--enable-gordon],
  552. [use Cell SPUs])],, enable_gordon=maybe)
  553. if test x$enable_gordon = xyes -o x$enable_gordon = xmaybe; then
  554. AC_ARG_WITH(gordon-dir, [AS_HELP_STRING([--with-gordon-dir=<path>],
  555. [specify Gordon installation directory (default is /usr/local/)])],
  556. [
  557. gordon_dir="$withval"
  558. enable_gordon=yes
  559. ], gordon_dir=/usr/local/)
  560. # do we have a valid Gordon setup ?
  561. have_valid_gordon=yes
  562. # can we use dynamic code loading facilities ?
  563. AC_CHECK_LIB(elf, elf_memory,, [have_valid_gordon=no])
  564. AC_CHECK_LIB(spe2, spe_context_create,,[have_valid_gordon=no])
  565. AC_CHECK_FUNC(spe_in_mbox_write, [], [have_valid_gordon=no])
  566. PKG_PROG_PKG_CONFIG
  567. if test -d "$gordon_dir"; then
  568. PKG_CONFIG_PATH="${PKG_CONFIG_PATH}:$gordon_dir"
  569. fi
  570. AC_SUBST(PKG_CONFIG_PATH)
  571. PKG_CHECK_MODULES([GORDON], [libgordon], [], have_valid_gordon=no)
  572. CPPFLAGS="${CPPFLAGS} ${GORDON_CFLAGS}"
  573. LIBS="${LIBS} ${GORDON_LIBS}"
  574. # AC_CHECK_FUNC(gordon_init, [gordon], [have_valid_gordon=no])
  575. # in case Gordon was explicitely required, but is not available, this is an error
  576. if test x$enable_gordon = xyes -a x$have_valid_gordon = xno; then
  577. AC_MSG_ERROR([cannot find Gordon])
  578. fi
  579. # now we enable Gordon if and only if a proper setup is available
  580. enable_gordon=$have_valid_gordon
  581. fi
  582. AC_MSG_CHECKING(whether GORDON should be used)
  583. AC_MSG_RESULT($enable_gordon)
  584. AC_SUBST(STARPU_USE_GORDON, $enable_gordon)
  585. AM_CONDITIONAL(STARPU_USE_GORDON, test x$enable_gordon = xyes)
  586. if test x$enable_gordon = xyes; then
  587. AC_DEFINE(STARPU_USE_GORDON, [1], [Cell support is enabled])
  588. GORDON_REQUIRES=gordon
  589. fi
  590. AC_SUBST(GORDON_REQUIRES)
  591. AC_MSG_CHECKING(whether blocking drivers should be disabled)
  592. AC_ARG_ENABLE(blocking-drivers, [AS_HELP_STRING([--disable-blocking-drivers], [disable blocking drivers])],
  593. enable_blocking=$enableval, enable_blocking=$enable_gordon)
  594. AC_MSG_RESULT($enable_blocking)
  595. if test x$enable_blocking = xno; then
  596. AC_DEFINE(STARPU_NON_BLOCKING_DRIVERS, [1], [drivers must progress])
  597. fi
  598. ###############################################################################
  599. # #
  600. # Debug and Performance analysis tools #
  601. # #
  602. ###############################################################################
  603. AC_MSG_CHECKING(whether debug mode should be enabled)
  604. AC_ARG_ENABLE(debug, [AS_HELP_STRING([--enable-debug], [enable debug mode])],
  605. enable_debug=$enableval, enable_debug=no)
  606. AC_MSG_RESULT($enable_debug)
  607. if test x$enable_debug = xyes; then
  608. CFLAGS="$CFLAGS -O0"
  609. AC_DEFINE(STARPU_SPINLOCK_CHECK, [1], [check spinlock use])
  610. else
  611. CFLAGS="$CFLAGS -O3"
  612. fi
  613. CFLAGS+=" -gdwarf-2 -g3 "
  614. AC_MSG_CHECKING(whether extra checks should be performed)
  615. AC_ARG_ENABLE(fast, [AS_HELP_STRING([--enable-fast],
  616. [do not enforce assertions])],
  617. enable_fast=$enableval, enable_fast=no)
  618. AC_MSG_RESULT($enable_fast)
  619. if test x$enable_fast = xyes; then
  620. AC_DEFINE(STARPU_NO_ASSERT, [1], [disable assertions])
  621. fi
  622. AC_MSG_CHECKING(whether memory status should be displayed)
  623. AC_ARG_ENABLE(memory-status, [AS_HELP_STRING([--enable-memory-status],
  624. [display memory status at the end of execution])],
  625. enable_memory_status=$enableval, enable_memory_status=no)
  626. AC_MSG_RESULT($enable_memory_status)
  627. if test x$enable_memory_status = xyes; then
  628. AC_DEFINE(STARPU_MEMORY_STATUS, [1], [display memory status])
  629. fi
  630. AC_MSG_CHECKING(whether debug messages should be displayed)
  631. AC_ARG_ENABLE(verbose, [AS_HELP_STRING([--enable-verbose],
  632. [display verbose debug messages])],
  633. enable_verbose=$enableval, enable_verbose=no)
  634. AC_MSG_RESULT($enable_verbose)
  635. if test x$enable_verbose = xyes; then
  636. AC_DEFINE(STARPU_VERBOSE, [1], [display verbose debug messages])
  637. fi
  638. AC_MSG_CHECKING(whether coverage testing should be enabled)
  639. AC_ARG_ENABLE(coverage, [AS_HELP_STRING([--enable-coverage],
  640. [enable coverage checking])],
  641. enable_coverage=$enableval, enable_coverage=no)
  642. AC_MSG_RESULT($enable_coverage)
  643. AC_SUBST(COVERAGE, $enable_coverage)
  644. AM_CONDITIONAL(STARPU_COVERAGE_ENABLED, [test "x$enable_coverage" = "xyes"])
  645. if test x$enable_coverage = xyes; then
  646. CPPFLAGS="${CPPFLAGS} --coverage"
  647. LDFLAGS="${LDFLAGS} --coverage"
  648. fi
  649. # shall we use FxT to generate trace of the execution ?
  650. AC_MSG_CHECKING(whether FxT traces should be generated)
  651. AC_ARG_WITH(fxt, [AS_HELP_STRING([--with-fxt[=<dir>]], [generate fxt traces])],
  652. [
  653. if test x$withval != xno; then
  654. use_fxt=yes
  655. if test x$withval = xyes; then
  656. AC_MSG_RESULT(yes)
  657. use_fxt_from_system=yes
  658. else
  659. # use specified path
  660. # TODO check if the dir is actually containing FxT
  661. use_fxt_from_system=no
  662. fxtdir=$withval
  663. AC_MSG_RESULT(yes using $fxtdir)
  664. AC_SUBST(FXTDIR, $fxtdir)
  665. fi
  666. else
  667. use_fxt=no
  668. AC_MSG_RESULT(no)
  669. fi
  670. ],
  671. [
  672. use_fxt=no
  673. AC_MSG_RESULT(no)
  674. ])
  675. AC_SUBST(STARPU_USE_FXT, $use_fxt)
  676. AM_CONDITIONAL(STARPU_USE_FXT, test x$use_fxt = xyes)
  677. if test x$use_fxt = xyes; then
  678. AC_DEFINE(STARPU_USE_FXT, [1], [enable FxT traces])
  679. AC_DEFINE(CONFIG_FUT, [1], [enable FUT traces])
  680. if test x$use_fxt_from_system = xno; then
  681. CPPFLAGS="${CPPFLAGS} -I$fxtdir/include/ "
  682. LDFLAGS="${LDFLAGS} -L$fxtdir/lib/ -lfxt"
  683. else
  684. PKG_CHECK_MODULES([FXT], [fxt])
  685. fi
  686. # if we use monotonic clocks, FxT uses -lrt
  687. AC_CHECK_LIB(rt, clock_gettime,,AC_MSG_ERROR([cannot find clock_gettime]))
  688. fi
  689. AC_MSG_CHECKING(whether performance debugging should be enabled)
  690. AC_ARG_ENABLE(perf-debug, [AS_HELP_STRING([--enable-perf-debug],
  691. [enable performance debugging through gprof])],
  692. enable_perf_debug=$enableval, enable_perf_debug=no)
  693. AC_MSG_RESULT($enable_perf_debug)
  694. AC_SUBST(STARPU_PERF_DEBUG, $enable_perf_debug)
  695. if test x$enable_perf_debug = xyes; then
  696. AC_DEFINE(STARPU_PERF_DEBUG, [1], [enable performance debug])
  697. CPPFLAGS="${CPPFLAGS} -pg -fprofile-arcs "
  698. LDFLAGS="${LDFLAGS} -pg -fprofile-arcs "
  699. fi
  700. AC_MSG_CHECKING(whether performance model debugging should be enabled)
  701. AC_ARG_ENABLE(model-debug, [AS_HELP_STRING([--enable-model-debug],
  702. [enable performance model debugging])],
  703. enable_model_debug=$enableval, enable_model_debug=no)
  704. AC_MSG_RESULT($enable_model_debug)
  705. if test x$enable_model_debug = xyes; then
  706. AC_DEFINE(STARPU_MODEL_DEBUG, [1], [enable performance model debug])
  707. fi
  708. AC_MSG_CHECKING(whether statistics should be generated)
  709. AC_ARG_ENABLE(stats, [AS_HELP_STRING([--enable-stats],
  710. [enable statistics])],
  711. enable_stats=$enableval, enable_stats=no)
  712. AC_MSG_RESULT($enable_stats)
  713. AC_SUBST(STATS, $enable_stats)
  714. AC_SUBST(STARPU_DATA_STATS, $enable_stats)
  715. if test x$enable_stats = xyes; then
  716. AC_DEFINE(STARPU_DATA_STATS, [1], [enable statistics])
  717. fi
  718. AC_CHECK_HEADERS([glpk.h])
  719. STARPU_HAVE_LIBRARY(GLPK, [glpk])
  720. ###############################################################################
  721. # #
  722. # Miscellaneous options for StarPU #
  723. # #
  724. ###############################################################################
  725. AC_MSG_CHECKING(how many buffers can be manipulated per task)
  726. AC_ARG_ENABLE(maxbuffers, [AS_HELP_STRING([--enable-maxbuffers=<nbuffers>],
  727. [maximum number of buffers per task])],
  728. nmaxbuffers=$enableval, nmaxbuffers=8)
  729. AC_MSG_RESULT($nmaxbuffers)
  730. AC_DEFINE_UNQUOTED(STARPU_NMAXBUFS, [$nmaxbuffers],
  731. [how many buffers can be manipulated per task])
  732. # We have one memory node shared by all CPU workers, one node per GPU, and
  733. # currently the Cell driver is using the same memory node as the CPU.
  734. maxnodes=1
  735. if test x$enable_cuda = xyes ; then
  736. # we could have used nmaxcudadev + 1, but this would certainly give an
  737. # odd number.
  738. maxnodes=`expr $maxnodes + $nmaxcudadev`
  739. fi
  740. if test x$enable_opencl = xyes ; then
  741. # we could have used nmaxcudadev + 1, but this would certainly give an
  742. # odd number.
  743. maxnodes=`expr $maxnodes + $nmaxopencldev`
  744. fi
  745. # todo: set maxnodes to the next power of 2 greater than maxnodes
  746. AC_MSG_CHECKING(maximum number of memory nodes)
  747. AC_MSG_RESULT($maxnodes)
  748. AC_DEFINE_UNQUOTED(STARPU_MAXNODES, [$maxnodes],
  749. [maximum number of memory nodes])
  750. AC_MSG_CHECKING(whether allocation cache should be used)
  751. AC_ARG_ENABLE(allocation-cache, [AS_HELP_STRING([--enable-allocation-cache],
  752. [enable data allocation cache])],
  753. enable_allocation_cache=$enableval, enable_allocation_cache=no)
  754. AC_MSG_RESULT($enable_allocation_cache)
  755. if test x$enable_allocation_cache = xyes; then
  756. AC_DEFINE(STARPU_USE_ALLOCATION_CACHE, [1], [enable data allocation cache])
  757. fi
  758. AC_ARG_WITH(perf-model-dir, [AS_HELP_STRING([--with-perf-model-dir=<dir>], [specify where performance models shoulds be stored])],
  759. [
  760. if test x$withval = xno; then
  761. AC_MSG_ERROR(--without-perf-model-dir is not a valid option)
  762. fi
  763. perf_model_dir="$withval"
  764. have_explicit_perf_model_dir=yes
  765. AC_DEFINE_UNQUOTED(STARPU_PERF_MODEL_DIR, ["$perf_model_dir"], [performance models location])
  766. ], [
  767. # by default, we put the performance models in
  768. # $HOME/.starpu/sampling/
  769. have_explicit_perf_model_dir=no
  770. perf_model_dir="\$HOME/.starpu/sampling/"
  771. ]
  772. )
  773. AC_MSG_CHECKING(using explicit performance model location)
  774. AC_MSG_RESULT($have_explicit_perf_model_dir)
  775. AC_MSG_CHECKING(performance models location)
  776. AC_MSG_RESULT($perf_model_dir)
  777. # On many multicore CPUs, clock cycles are not synchronized
  778. AC_CHECK_LIB([rt], [clock_gettime])
  779. AC_CHECK_FUNCS([clock_gettime])
  780. # Compute the maximum number of workers (we round it to 16 for alignment
  781. # purposes).
  782. nmaxworkers=`expr 16 \* \( \( $maxcpus + $nmaxcudadev + $nmaxopencldev + 15 \) / 16 \) `
  783. AC_MSG_CHECKING(Maximum number of workers)
  784. AC_MSG_RESULT($nmaxworkers)
  785. AC_DEFINE_UNQUOTED(STARPU_NMAXWORKERS, [$nmaxworkers], [Maximum number of workers])
  786. # Computes the maximum number of implementations per arch
  787. AC_MSG_CHECKING(maximum number of implementations)
  788. AC_ARG_ENABLE(maximplementations, [AS_HELP_STRING([--enable-maximplementations=<number>],
  789. [maximum number of implementations])],
  790. maximplementations=$enableval, maximplementations=4)
  791. AC_MSG_RESULT($maximplementations)
  792. AC_DEFINE_UNQUOTED(STARPU_MAXIMPLEMENTATIONS, [$maximplementations],
  793. [maximum number of implementations])
  794. ###############################################################################
  795. # #
  796. # MPI #
  797. # #
  798. ###############################################################################
  799. AC_ARG_WITH(mpicc, [AS_HELP_STRING([--with-mpicc[=<path to mpicc>]],
  800. [Path of the mpicc compiler])],
  801. [
  802. if test x$withval = xyes; then
  803. AC_MSG_ERROR(--with-mpicc must be given a pathname)
  804. else
  805. mpicc_path=$withval
  806. fi
  807. ],
  808. [
  809. # nothing was specified: default value is used
  810. AC_PATH_PROG(mpicc_path, mpicc, [no], [])
  811. ])
  812. # We test if the MPICC compiler exists
  813. if test ! -x $mpicc_path; then
  814. #MPICC does not exists or is not executable
  815. AC_MSG_RESULT(The mpicc compiler is not valid)
  816. use_mpi=no
  817. else
  818. use_mpi=yes
  819. fi
  820. AC_MSG_CHECKING(mpicc path)
  821. AC_MSG_RESULT($mpicc_path)
  822. AC_SUBST(MPICC, $mpicc_path)
  823. if test x$use_mpi = xyes; then
  824. cc_or_mpicc=$mpicc_path
  825. else
  826. cc_or_mpicc=$CC
  827. fi
  828. AC_SUBST(CC_OR_MPICC, $cc_or_mpicc)
  829. # If the user specifically asks for it, or if we are in a developer checkout, we enable mpi check
  830. AC_ARG_ENABLE(mpi-check, AC_HELP_STRING([--enable-mpi-check], [Enable execution of MPI testcases]))
  831. running_mpi_check=0
  832. if test -d "$srcdir/.svn" ; then
  833. running_mpi_check=yes
  834. fi
  835. if test x$enable_mpi_check = xyes ; then
  836. running_mpi_check=yes
  837. fi
  838. if test x$enable_mpi_check = xno ; then
  839. running_mpi_check=no
  840. fi
  841. # Check if mpiexec is available
  842. AC_ARG_WITH(mpiexec, [AS_HELP_STRING([--with-mpiexec[=<path to mpiexec>]],
  843. [Path of mpiexec])],
  844. [
  845. if test x$withval = xyes; then
  846. AC_MSG_ERROR(--with-mpiexec must be given a pathname)
  847. else
  848. mpiexec_path=$withval
  849. fi
  850. ],
  851. [
  852. # nothing was specified: look in the path
  853. AC_PATH_PROG(mpiexec_path, mpiexec, [no], [$(dirname $mpicc_path):$PATH])
  854. ])
  855. AC_MSG_CHECKING(whether mpiexec is available)
  856. AC_MSG_RESULT($mpiexec_path)
  857. # We test if MPIEXEC exists
  858. if test ! -x $mpiexec_path; then
  859. #MPIEXEC does not exists or is not executable
  860. AC_MSG_RESULT(The mpiexec script is not valid)
  861. running_mpi_check=no
  862. mpiexec_path=""
  863. fi
  864. AM_CONDITIONAL(STARPU_MPI_CHECK, test x$running_mpi_check = xyes)
  865. if test x$use_mpi = xyes; then
  866. AC_MSG_CHECKING(whether MPI tests should be run)
  867. AC_MSG_RESULT($running_mpi_check)
  868. AC_SUBST(MPIEXEC,$mpiexec_path)
  869. fi
  870. AC_MSG_CHECKING(whether the StarPU MPI library should be generated)
  871. AC_MSG_RESULT($use_mpi)
  872. AC_SUBST(USE_MPI, $use_mpi)
  873. AM_CONDITIONAL(USE_MPI, test x$use_mpi = xyes)
  874. if test x$use_mpi = xyes; then
  875. AC_DEFINE(STARPU_USE_MPI,[],[whether the StarPU MPI library is available])
  876. fi
  877. ###############################################################################
  878. # #
  879. # StarPU-Top #
  880. # #
  881. ###############################################################################
  882. build_starpu_top=no
  883. AC_PATH_PROGS([QMAKE], [qmake-qt4 qmake], [not-found])
  884. if test x$QMAKE != xnot-found; then
  885. QMAKE_VERSION=`$QMAKE --version 2>&1 | head -n 1 | cut -d '.' -f 1 | cut -d ' ' -f 3`
  886. if test $QMAKE_VERSION -ge 2 ; then
  887. PKG_CHECK_EXISTS([QtGui QtNetwork QtOpenGL QtSql], [
  888. QT_MAJVERSION=`$PKG_CONFIG --modversion QtGui | cut -d '.' -f 1`
  889. QT_MINVERSION=`$PKG_CONFIG --modversion QtGui | cut -d '.' -f 2`
  890. if test $QT_MAJVERSION -gt 4 -o \( $QT_MAJVERSION -eq 4 -a $QT_MINVERSION -ge 7 \) ; then
  891. build_starpu_top=yes
  892. fi
  893. QWT_PRI=embed
  894. AC_ARG_WITH(qwt-include-dir,
  895. [AS_HELP_STRING([--with-qwt-include-dir=<path>],
  896. [specify installed libqwt include path])],
  897. [
  898. STARPU_QWT_CPPFLAGS="-I$withval"
  899. AC_SUBST(STARPU_QWT_CPPFLAGS)
  900. QWT_PRI=system
  901. ])
  902. AC_ARG_WITH(qwt-lib-dir,
  903. [AS_HELP_STRING([--with-qwt-lib-dir=<path>],
  904. [specify installed libqwt library path])],
  905. [
  906. STARPU_QWT_LDFLAGS="-L$withval"
  907. QWT_PRI=system
  908. ])
  909. AC_ARG_WITH(qwt-lib,
  910. [AS_HELP_STRING([--with-qwt-lib=<name>],
  911. [specify installed libqwt library name])],
  912. [
  913. STARPU_QWT_LDFLAGS="${STARPU_QWT_LDFLAGS} -l$withval"
  914. QWT_PRI=system
  915. ])
  916. AC_SUBST(QWT_PRI)
  917. ])
  918. fi
  919. fi
  920. AM_CONDITIONAL(BUILD_STARPU_TOP, test x$build_starpu_top = xyes)
  921. ###############################################################################
  922. # #
  923. # Flags for C Compiler #
  924. # #
  925. ###############################################################################
  926. # IS_SUPPORTED_CFLAG(flag)
  927. # ------------------------
  928. # Check if the CFLAGS `flag' is supported by the compiler
  929. AC_DEFUN([IS_SUPPORTED_CFLAG],
  930. [
  931. AC_REQUIRE([AC_PROG_CC])
  932. AC_MSG_CHECKING([whether compiler support $1])
  933. SAVED_CFLAGS="$CFLAGS"
  934. CFLAGS="$1 -we10006"
  935. AC_COMPILE_IFELSE(
  936. AC_LANG_PROGRAM(
  937. [[]],
  938. [[
  939. AC_LANG_SOURCE([
  940. const char *hello = "Hello World";
  941. ])
  942. ]]
  943. ),
  944. [
  945. GLOBAL_AM_CFLAGS="$GLOBAL_AM_CFLAGS $1"
  946. AC_MSG_RESULT(yes)
  947. ],
  948. AC_MSG_RESULT(no)
  949. )
  950. CFLAGS="$SAVED_CFLAGS"
  951. ])
  952. IS_SUPPORTED_CFLAG(-W)
  953. IS_SUPPORTED_CFLAG(-Wall)
  954. IS_SUPPORTED_CFLAG(-Wextra)
  955. AC_SUBST(GLOBAL_AM_CFLAGS)
  956. if test "x$STARPU_DEVEL" != x; then
  957. AC_DEFINE(STARPU_DEVEL, [1], [enable developer warnings])
  958. fi
  959. ###############################################################################
  960. # #
  961. # GCC extensions #
  962. # #
  963. ###############################################################################
  964. AC_ARG_ENABLE([gcc-extensions],
  965. [AS_HELP_STRING([--enable-gcc-extensions],
  966. [build the GCC plug-in that provides C language extensions (experimental)])],
  967. [enable_gcc_plugin="$enableval"],
  968. [enable_gcc_plugin="no"])
  969. if test "x$enable_gcc_plugin" = "xyes"; then
  970. STARPU_GCC_PLUGIN_SUPPORT
  971. if test "x$ac_cv_have_gcc_plugins" != "xyes"; then
  972. AC_MSG_ERROR([This compiler lacks GCC plug-in support.])
  973. fi
  974. build_gcc_plugin="yes"
  975. # GNU Guile 1.8/2.0 is used to run the test suite.
  976. AC_PATH_PROG([GUILE], [guile])
  977. if test "x$GUILE" != "x"; then
  978. run_gcc_plugin_test_suite="yes"
  979. else
  980. run_gcc_plugin_test_suite="no"
  981. fi
  982. else
  983. build_gcc_plugin="no"
  984. run_gcc_plugin_test_suite="no"
  985. fi
  986. # Bison is used to generate the C expression parser. The generated
  987. # parser is part of the distribution, though.
  988. AC_PROG_YACC
  989. AM_CONDITIONAL([BUILD_GCC_PLUGIN], [test "x$build_gcc_plugin" = "xyes"])
  990. AM_CONDITIONAL([HAVE_GUILE], [test "x$GUILE" != "x"])
  991. ###############################################################################
  992. # #
  993. # OpenCL interface #
  994. # #
  995. ###############################################################################
  996. AC_ARG_ENABLE([socl],
  997. [AS_HELP_STRING([--enable-socl],
  998. [build the OpenCL interface (SOCL)])],
  999. [enable_socl="$enableval"],
  1000. [enable_socl="no"])
  1001. if test "x$enable_socl" = "xyes"; then
  1002. STARPU_SOCL_SUPPORT
  1003. build_socl="yes"
  1004. else
  1005. build_socl="no"
  1006. run_socl_test_suite="no"
  1007. fi
  1008. AM_CONDITIONAL([BUILD_SOCL], [test "x$build_socl" = "xyes"])
  1009. AM_CONDITIONAL([STARPU_USE_SOCL], [test "x$build_socl" = "xyes"])
  1010. ###############################################################################
  1011. # #
  1012. # Examples #
  1013. # #
  1014. ###############################################################################
  1015. AC_ARG_ENABLE(opengl-render, [AS_HELP_STRING([--enable-opengl-render],
  1016. [enable OpenGL rendering of some examples])],
  1017. enable_opengl_render=$enableval, enable_opengl_render=no)
  1018. if test x$enable_opengl_render = xyes; then
  1019. STARPU_CHECK_LIB(OPENGL_RENDER, glut, glutInit,,AC_MSG_ERROR([cannot find glut]))
  1020. STARPU_CHECK_LIB(OPENGL_RENDER, GL, glXCreateContext,,AC_MSG_ERROR([cannot find GL]))
  1021. STARPU_CHECK_LIB(OPENGL_RENDER, GLU, gluLookAt,,AC_MSG_ERROR([cannot find GLU]))
  1022. AC_DEFINE(STARPU_OPENGL_RENDER, [1], [enable OpenGL rendering of some examples])
  1023. fi
  1024. AC_MSG_CHECKING(whether OpenGL rendering is enabled)
  1025. AC_SUBST(STARPU_OPENGL_RENDER, $enable_opengl_render)
  1026. AC_MSG_RESULT($enable_opengl_render)
  1027. AC_PATH_XTRA
  1028. if test "x$x_includes" != "xNONE"; then
  1029. AC_DEFINE(STARPU_HAVE_X11, [1], [enable X11])
  1030. fi
  1031. AM_CONDITIONAL([HAVE_X11], [test "x$x_includes" != "xNONE"])
  1032. # In case there are BLAS kernels that are used by the example applications
  1033. # we may specify which library to use. Note that this is not used for StarPU
  1034. # itself.
  1035. blas_lib=maybe
  1036. AC_ARG_ENABLE(blas-lib,
  1037. [ --enable-blas-lib[=blaslibname]:
  1038. none [default]: no BLAS lib is used
  1039. atlas: use ATLAS library
  1040. goto: use GotoBLAS library],
  1041. [
  1042. if test "x$enableval" = "xatlas" ; then
  1043. blas_lib=atlas
  1044. elif test "x$enableval" = "xgoto" ; then
  1045. blas_lib=goto
  1046. elif test "x$enableval" = "xnone" ; then
  1047. blas_lib=none
  1048. elif test x$enableval = xno; then
  1049. blas_lib=none
  1050. else
  1051. echo
  1052. echo "Error!"
  1053. echo "Unknown BLAS library"
  1054. exit -1
  1055. fi
  1056. ])
  1057. if test x$blas_lib = xmaybe -o x$blas_lib = xgoto; then
  1058. AC_ARG_WITH(goto-dir, [AS_HELP_STRING([--with-goto-dir=<dir>], [specify GotoBLAS lib location])],
  1059. [
  1060. blas_lib=goto
  1061. gotodir=$withval
  1062. AC_SUBST(GOTODIR, $gotodir)
  1063. CPPFLAGS="${CPPFLAGS} -I$gotodir/ "
  1064. LDFLAGS="${LDFLAGS} -L$gotodir/ "
  1065. ]
  1066. )
  1067. if test x$blas_lib = xgoto; then
  1068. STARPU_CHECK_LIB(BLAS, gfortran, main,,)
  1069. # Perhaps that GotoBLAS2 is available instead (so that we have libgotoblas2.{so,a})
  1070. STARPU_CHECK_LIB(BLAS, goto2, sgemm_,, [havegoto2=no], [$STARPU_BLAS_LDFLAGS])
  1071. if test x$havegoto2 = xno; then
  1072. STARPU_CHECK_LIB(BLAS, goto, sgemm_,,AC_MSG_ERROR([cannot find goto lib]), [$STARPU_BLAS_LDFLAGS])
  1073. fi
  1074. AC_DEFINE(STARPU_GOTO, [1], [use STARPU_GOTO library])
  1075. fi
  1076. fi
  1077. if test x$blas_lib = xmaybe -o x$blas_lib = xatlas; then
  1078. AC_ARG_WITH(atlas-dir, [AS_HELP_STRING([--with-atlas-dir=<dir>], [specify ATLAS lib location])],
  1079. [
  1080. AC_MSG_CHECKING(STARPU_ATLAS location)
  1081. blas_lib=atlas
  1082. atlasdir=$withval
  1083. AC_MSG_RESULT($atlasdir)
  1084. AC_SUBST(ATLASDIR, $atlasdir)
  1085. CPPFLAGS="${CPPFLAGS} -I$atlasdir/include/ "
  1086. LDFLAGS="${LDFLAGS} -L$atlasdir/lib/ "
  1087. ]
  1088. )
  1089. if test x$blas_lib = xatlas; then
  1090. # test whether STARPU_ATLAS is actually available
  1091. AC_CHECK_HEADER([cblas.h],,AC_MSG_ERROR([cannot find atlas headers]))
  1092. STARPU_CHECK_LIB(BLAS, atlas, ATL_sgemm,,AC_MSG_ERROR([cannot find atlas lib]),)
  1093. STARPU_CHECK_LIB(BLAS, cblas, cblas_sgemm,,AC_MSG_ERROR([cannot find atlas lib]),[-latlas])
  1094. AC_DEFINE(STARPU_ATLAS, [1], [use STARPU_ATLAS library])
  1095. fi
  1096. fi
  1097. if test x$blas_lib = xmaybe; then
  1098. # Should we use MKL ?
  1099. AC_ARG_WITH(mkl-cflags, [AS_HELP_STRING([--with-mkl-cflags], [specify MKL compilation flags])],
  1100. [
  1101. CPPFLAGS="${CPPFLAGS} $withval"
  1102. blas_lib=mkl
  1103. ])
  1104. AC_ARG_WITH(mkl-ldflags, [AS_HELP_STRING([--with-mkl-ldflags], [specify MKL linking flags])],
  1105. [
  1106. LDFLAGS="${LDFLAGS} $withval"
  1107. blas_lib=mkl
  1108. ])
  1109. if test x$blas_lib = xmkl; then
  1110. AC_DEFINE(STARPU_MKL, [1], [use MKL library])
  1111. fi
  1112. fi
  1113. if test x$blas_lib = xmaybe; then
  1114. #perhaps it is possible to use some BLAS lib from the system
  1115. use_system_blas=no
  1116. STARPU_SEARCH_LIBS(BLAS,[sgemm_],[blas],use_system_blas=yes,,)
  1117. if test x$use_system_blas = xyes; then
  1118. AC_DEFINE(STARPU_SYSTEM_BLAS, [1], [use refblas library])
  1119. blas_lib=system
  1120. else
  1121. blas_lib=none
  1122. fi
  1123. fi
  1124. AM_CONDITIONAL(ATLAS_BLAS_LIB, test x$blas_lib = xatlas)
  1125. AM_CONDITIONAL(GOTO_BLAS_LIB, test x$blas_lib = xgoto)
  1126. AM_CONDITIONAL(MKL_BLAS_LIB, test x$blas_lib = xmkl)
  1127. AM_CONDITIONAL(SYSTEM_BLAS_LIB, test x$blas_lib = xsystem)
  1128. AM_CONDITIONAL(NO_BLAS_LIB, test x$blas_lib = xnone)
  1129. AC_MSG_CHECKING(which BLAS lib should be used)
  1130. AC_MSG_RESULT($blas_lib)
  1131. AC_SUBST(BLAS_LIB,$blas_lib)
  1132. ##########################################
  1133. # FFT #
  1134. ##########################################
  1135. have_fftw=no
  1136. have_fftwf=no
  1137. have_fftwl=no
  1138. PKG_CHECK_MODULES([FFTW], [fftw3], [
  1139. AC_DEFINE([STARPU_HAVE_FFTW], [1], [Define to 1 if you have the libfftw3 library.])
  1140. AC_SUBST([STARPU_HAVE_FFTW], [1])
  1141. have_fftw=yes
  1142. ], [:])
  1143. AM_CONDITIONAL(STARPU_HAVE_FFTW, [test x$have_fftw = xyes])
  1144. PKG_CHECK_MODULES([FFTWF], [fftw3f], [
  1145. AC_DEFINE([STARPU_HAVE_FFTWF], [1], [Define to 1 if you have the libfftw3f library.])
  1146. AC_SUBST([STARPU_HAVE_FFTWF], [1])
  1147. have_fftwf=yes
  1148. ], [:])
  1149. AM_CONDITIONAL(STARPU_HAVE_FFTWF, [test x$have_fftwf = xyes])
  1150. PKG_CHECK_MODULES([FFTWL], [fftw3l], [
  1151. AC_DEFINE([STARPU_HAVE_FFTWL], [1], [Define to 1 if you have the libfftw3l library.])
  1152. AC_SUBST([HAVE_FFTWFL], [1])
  1153. have_fftwl=yes
  1154. ], [:])
  1155. AM_CONDITIONAL(STARPU_HAVE_FFTWL, [test x$have_fftwl = xyes])
  1156. ##########################################
  1157. # hwloc #
  1158. ##########################################
  1159. AC_ARG_WITH([hwloc], [AS_HELP_STRING([--without-hwloc], [Disable hwloc (enabled by default)])])
  1160. SAVED_LDFLAGS="${LDFLAGS}"
  1161. SAVED_CPPFLAGS="${CPPFLAGS}"
  1162. AS_IF([test "x$with_hwloc" != "xno"], [
  1163. PKG_CHECK_MODULES([HWLOC],[hwloc], [
  1164. have_valid_hwloc=yes
  1165. have_pkgconfig_hwloc=yes], [
  1166. have_valid_hwloc=no
  1167. have_pkgconfig_hwloc=no])
  1168. AS_IF([test "$have_valid_hwloc" = "no"], [
  1169. hwloc_dir="$withval"
  1170. CPPFLAGS="${SAVED_CPPFLAGS} -I$hwloc_dir/include"
  1171. AC_CHECK_HEADER([hwloc.h],[have_valid_hwloc=yes],[have_valid_hwloc=no])
  1172. LDFLAGS="${SAVED_LDFLAGS} -L$hwloc_dir/lib"
  1173. AC_HAVE_LIBRARY([hwloc],[have_valid_hwloc=yes],[have_valid_hwloc=no])
  1174. ])
  1175. ],
  1176. have_valid_hwloc="no")
  1177. AS_IF([test "$have_valid_hwloc" = "yes"], [
  1178. AC_DEFINE([STARPU_HAVE_HWLOC], [1], [Define to 1 if you have the hwloc library.])
  1179. HWLOC_REQUIRES=hwloc
  1180. AC_SUBST([STARPU_HAVE_HWLOC], [1])
  1181. AS_IF([test "$have_pkgconfig_hwloc" = "no"], [
  1182. HWLOC_CFLAGS="-I$hwloc_dir/include"
  1183. HWLOC_LIBS="-L$hwloc_dir/lib -lhwloc"])
  1184. ])
  1185. LDFLAGS="${SAVED_LDFLAGS}"
  1186. CPPFLAGS="${SAVED_CPPFLAGS}"
  1187. AC_MSG_CHECKING(whether hwloc should be used)
  1188. AC_MSG_RESULT($have_valid_hwloc)
  1189. AC_SUBST(HWLOC_REQUIRES)
  1190. # is the header file f77.h available ?
  1191. have_f77_h=yes
  1192. AC_CHECK_HEADER([f77.h],,[have_f77_h=no])
  1193. AC_MSG_CHECKING(whether header file f77.h is available)
  1194. AC_MSG_RESULT($have_f77_h)
  1195. AC_SUBST(STARPU_HAVE_F77_H, $have_f77_h)
  1196. AM_CONDITIONAL(STARPU_HAVE_F77_H, test x$have_f77_h = xyes)
  1197. if test x$have_f77_h = xyes; then
  1198. AC_DEFINE([STARPU_HAVE_F77_H], [1], [Define to 1 if you have the <f77.h> header file.])
  1199. fi
  1200. # Do we want to run optional tests
  1201. AC_MSG_CHECKING(whether optional tests should be run)
  1202. AC_ARG_ENABLE(optional_tests, [AS_HELP_STRING([--optional-tests],
  1203. [run optional tests])],
  1204. want_optional_tests=$enableval, want_optional_tests=no)
  1205. AC_MSG_RESULT($want_optional_tests)
  1206. AM_CONDITIONAL([COND_OPT], [test "$want_optional_tests" = yes])
  1207. # Check if icc is available
  1208. AC_CHECK_PROGS([ICC], [icc])
  1209. # If cuda and icc are both available, check they are compatible
  1210. if test "$enable_cuda" = "yes" -a "$ICC" != ""; then
  1211. AC_MSG_CHECKING(whether CUDA and ICC are compatible)
  1212. AC_COMPILE_IFELSE(
  1213. AC_LANG_PROGRAM(
  1214. [[#include <cuda.h>]],
  1215. [[]]
  1216. ),
  1217. AC_MSG_RESULT(yes),
  1218. [ICC=""
  1219. AC_MSG_RESULT(no)]
  1220. )
  1221. fi
  1222. # Disable ICC on windows
  1223. if test "x$ICC" != "x" -a "$starpu_windows" = "yes" ; then
  1224. ICC=""
  1225. fi
  1226. if test "x$ICC" != "x"; then
  1227. AC_DEFINE(STARPU_HAVE_ICC, [], [Define this if icc is available])
  1228. fi
  1229. AM_CONDITIONAL([STARPU_HAVE_ICC], [test "x$ICC" != "x"])
  1230. AC_CHECK_MEMBER([struct cudaDeviceProp.pciDomainID],
  1231. AC_DEFINE([STARPU_HAVE_DOMAINID],[1],[Define to 1 if CUDA device properties include DomainID]),
  1232. , [[#include <cuda_runtime_api.h>]])
  1233. AC_CHECK_MEMBER([struct cudaDeviceProp.pciBusID],
  1234. AC_DEFINE([STARPU_HAVE_BUSID],[1],[Define to 1 if CUDA device properties include BusID]),
  1235. , [[#include <cuda_runtime_api.h>]])
  1236. # File configuration
  1237. AC_CONFIG_COMMANDS([executable-scripts], [
  1238. chmod +x tests/regression/regression.sh
  1239. chmod +x gcc-plugin/tests/run-test
  1240. ])
  1241. AC_CONFIG_FILES(tests/regression/regression.sh tests/regression/profiles tests/regression/profiles.build.only)
  1242. AC_CONFIG_HEADER(src/common/config.h include/starpu_config.h gcc-plugin/src/starpu-gcc-config.h)
  1243. AC_OUTPUT([
  1244. Makefile
  1245. src/Makefile
  1246. tools/Makefile
  1247. socl/Makefile
  1248. socl/src/Makefile
  1249. libstarpu.pc
  1250. libstarpumpi.pc
  1251. examples/Makefile
  1252. examples/opt/Makefile
  1253. examples/starpufft/Makefile
  1254. examples/stencil/Makefile
  1255. examples/socl/Makefile
  1256. examples/starpufft/libstarpufft.pc
  1257. tests/Makefile
  1258. tests/opt/Makefile
  1259. doc/Makefile
  1260. mpi/Makefile
  1261. starpu-top/StarPU-Top.pro
  1262. gcc-plugin/Makefile
  1263. gcc-plugin/src/Makefile
  1264. gcc-plugin/tests/Makefile
  1265. gcc-plugin/tests/run-test
  1266. gcc-plugin/examples/Makefile
  1267. ])
  1268. AC_MSG_NOTICE([
  1269. CPUs enabled: $enable_cpu
  1270. CUDA enabled: $enable_cuda
  1271. OpenCL enabled: $enable_opencl
  1272. Cell enabled: $enable_gordon
  1273. GCC plug-in: $build_gcc_plugin
  1274. GCC plug-in test suite: $run_gcc_plugin_test_suite
  1275. Compile-time limits
  1276. (change these with --enable-maxcpus, --enable-maxcudadev,
  1277. --enable-maxopencldev, --enable-maxbuffers)
  1278. Maximum number of CPUs: $maxcpus
  1279. Maximum number of CUDA devices: $nmaxcudadev
  1280. Maximum number of OpenCL devices: $nmaxopencldev
  1281. Maximum number of memory nodes: $maxnodes
  1282. Maximum number of task buffers: $nmaxbuffers
  1283. GPU-GPU transfers: $have_cuda_memcpy_peer
  1284. Allocation cache: $enable_allocation_cache
  1285. MPI enabled: $use_mpi
  1286. SOCL enabled: $build_socl
  1287. Magma enabled: $have_magma
  1288. BLAS library: $blas_lib
  1289. hwloc: $have_valid_hwloc
  1290. FxT trace enabled: $use_fxt
  1291. StarPU-Top: $build_starpu_top
  1292. ])