starpu-max/doc/doxygen/chapters/320_scheduling.doxy

/* StarPU --- Runtime system for heterogeneous multicore architectures.
 *
 * Copyright (C) 2010-2019                                CNRS
 * Copyright (C) 2011,2012,2016                           Inria
 * Copyright (C) 2009-2011,2014-2019                      Université de Bordeaux
 *
 * StarPU is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation; either version 2.1 of the License, or (at
 * your option) any later version.
 *
 * StarPU is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 *
 * See the GNU Lesser General Public License in COPYING.LGPL for more details.
 */

/*! \page Scheduling Scheduling

\section TaskSchedulingPolicy Task Scheduling Policies

The basics of the scheduling policy are the following:

<ul>
<li>The scheduler gets to schedule tasks (<c>push</c> operation) when they become
ready to be executed, i.e. they are not waiting for some tags, data dependencies
or task dependencies.</li>
<li>Workers pull tasks (<c>pop</c> operation) one by one from the scheduler.
</ul>

This means scheduling policies usually contain at least one queue of tasks to
store them between the time when they become available, and the time when a
worker gets to grab them.

By default, StarPU uses the work-stealing scheduler <c>lws</c>. This is
because it provides correct load balance and locality even if the application codelets do
not have performance models. Other non-modelling scheduling policies can be
selected among the list below, thanks to the environment variable \ref
STARPU_SCHED. For instance <c>export STARPU_SCHED=dmda</c> . Use <c>help</c> to
get the list of available schedulers.


<b>Non Performance Modelling Policies:</b>

The <b>eager</b> scheduler uses a central task queue, from which all workers draw tasks
to work on concurrently. This however does not permit to prefetch data since the scheduling
decision is taken late. If a task has a non-0 priority, it is put at the front of the queue.

The <b>random</b> scheduler uses a queue per worker, and distributes tasks randomly according to assumed worker
overall performance.

The <b>ws</b> (work stealing) scheduler uses a queue per worker, and schedules
a task on the worker which released it by
default. When a worker becomes idle, it steals a task from the most loaded
worker.

The <b>lws</b> (locality work stealing) scheduler uses a queue per worker, and schedules
a task on the worker which released it by
default. When a worker becomes idle, it steals a task from neighbour workers. It
also takes into account priorities.

The <b>prio</b> scheduler also uses a central task queue, but sorts tasks by
priority specified by the programmer (between -5 and 5).

\section DMTaskSchedulingPolicy Performance Model-Based Task Scheduling Policies

If (<b>and only if</b>) your application <b>codelets have performance models</b> (\ref
PerformanceModelExample), you should change the scheduler thanks to the
environment variable \ref STARPU_SCHED, to select one of the policies below, in
order to take advantage of StarPU's performance modelling. For instance
<c>export STARPU_SCHED=dmda</c> . Use <c>help</c> to get the list of available
schedulers.

<b>Note:</B> Depending on the performance model type chosen, some preliminary
calibration runs may be needed for the model to converge. If the calibration
has not been done, or is insufficient yet, or if no performance model is
specified for a codelet, every task built from this codelet will be scheduled
using an <b>eager</b> fallback policy.

<b>Troubleshooting:</b> Configuring and recompiling StarPU using the
\ref enable-verbose "--enable-verbose" \c configure option displays some statistics at the end of
execution about the percentage of tasks which have been scheduled by a DM*
family policy using performance model hints. A low or zero percentage may be
the sign that performance models are not converging or that codelets do not
have performance models enabled.

<b>Performance Modelling Policies:</b>

The <b>dm</b> (deque model) scheduler takes task execution performance models into account to
perform a HEFT-similar scheduling strategy: it schedules tasks where their
termination time will be minimal. The difference with HEFT is that <b>dm</b>
schedules tasks as soon as they become available, and thus in the order they
become available, without taking priorities into account.

The <b>dmda</b> (deque model data aware) scheduler is similar to dm, but it also takes
into account data transfer time.

The <b>dmdar</b> (deque model data aware ready) scheduler is similar to dmda,
but it also privileges tasks whose data buffers are already available
on the target device.

The <b>dmdas</b> (deque model data aware sorted) scheduler is similar to dmdar,
except that it sorts tasks by priority order, which allows to become even closer
to HEFT by respecting priorities after having made the scheduling decision (but
it still schedules tasks in the order they become available).

The <b>dmdasd</b> (deque model data aware sorted decision) scheduler is similar
to dmdas, except that when scheduling a task, it takes into account its priority
when computing the minimum completion time, since this task may get executed
before others, and thus the latter should be ignored.

The <b>heft</b> (heterogeneous earliest finish time) scheduler is a deprecated
alias for <b>dmda</b>.

The <b>pheft</b> (parallel HEFT) scheduler is similar to dmda, it also supports
parallel tasks (still experimental). Should not be used when several contexts using
it are being executed simultaneously.

The <b>peager</b> (parallel eager) scheduler is similar to eager, it also
supports parallel tasks (still experimental). Should not be used when several 
contexts using it are being executed simultaneously.

TODO: describe modular schedulers

\section TaskDistributionVsDataTransfer Task Distribution Vs Data Transfer

Distributing tasks to balance the load induces data transfer penalty. StarPU
thus needs to find a balance between both. The target function that the
scheduler <c>dmda</c> of StarPU
tries to minimize is <c>alpha * T_execution + beta * T_data_transfer</c>, where
<c>T_execution</c> is the estimated execution time of the codelet (usually
accurate), and <c>T_data_transfer</c> is the estimated data transfer time. The
latter is estimated based on bus calibration before execution start,
i.e. with an idle machine, thus without contention. You can force bus
re-calibration by running the tool <c>starpu_calibrate_bus</c>. The
beta parameter defaults to <c>1</c>, but it can be worth trying to tweak it
by using <c>export STARPU_SCHED_BETA=2</c> (\ref STARPU_SCHED_BETA) for instance, since during
real application execution, contention makes transfer times bigger.
This is of course imprecise, but in practice, a rough estimation
already gives the good results that a precise estimation would give.

\section Energy-basedScheduling Energy-based Scheduling

If the application can provide some energy consumption performance model (through
the field starpu_codelet::energy_model), StarPU will
take it into account when distributing tasks. The target function that
the scheduler <c>dmda</c> minimizes becomes <c>alpha * T_execution +
beta * T_data_transfer + gamma * Consumption</c> , where <c>Consumption</c>
is the estimated task consumption in Joules. To tune this parameter, use
<c>export STARPU_SCHED_GAMMA=3000</c> (\ref STARPU_SCHED_GAMMA) for instance, to express that each Joule
(i.e kW during 1000us) is worth 3000us execution time penalty. Setting
<c>alpha</c> and <c>beta</c> to zero permits to only take into account energy consumption.

This is however not sufficient to correctly optimize energy: the scheduler would
simply tend to run all computations on the most energy-conservative processing
unit. To account for the consumption of the whole machine (including idle
processing units), the idle power of the machine should be given by setting
<c>export STARPU_IDLE_POWER=200</c> (\ref STARPU_IDLE_POWER) for 200W, for instance. This value can often
be obtained from the machine power supplier.

The energy actually consumed by the total execution can be displayed by setting
<c>export STARPU_PROFILING=1 STARPU_WORKER_STATS=1</c> .

On-line task consumption measurement is currently only supported through the
<c>CL_PROFILING_POWER_CONSUMED</c> OpenCL extension, implemented in the MoviSim
simulator. Applications can however provide explicit measurements by
using the function starpu_perfmodel_update_history() (examplified in \ref PerformanceModelExample
with the <c>energy_model</c> performance model). Fine-grain
measurement is often not feasible with the feedback provided by the hardware, so
the user can for instance run a given task a thousand times, measure the global
consumption for that series of tasks, divide it by a thousand, repeat for
varying kinds of tasks and task sizes, and eventually feed StarPU
with these manual measurements through starpu_perfmodel_update_history().
For instance, for CUDA devices, <c>nvidia-smi -q -d POWER</c> can be used to get
the current consumption in Watt. Multiplying this value by the average duration
of a single task gives the consumption of the task in Joules, which can be given
to starpu_perfmodel_update_history().

\section ExistingModularizedSchedulers Modularized Schedulers

StarPU provides a powerful way to implement schedulers, as documented in \ref
DefiningANewModularSchedulingPolicy . It is currently shipped with the following
pre-defined Modularized Schedulers :

- Eager-based Schedulers (with/without prefetching : \c modular-eager ,
\c modular-eager-prefetching) : \n
Naive scheduler, which tries to map a task on the first available resource
it finds.

- Prio-based Schedulers (with/without prefetching :
\c modular-prio, \c modular-prio-prefetching) : \n
Similar to Eager-Based Schedulers. Can handle tasks which have a defined
priority and schedule them accordingly.

- Random-based Schedulers (with/without prefetching: \c modular-random,
\c modular-random-prio, \c modular-random-prefetching, \c
modular-random-prio-prefetching) : \n
Selects randomly a resource to be mapped on for each task.

- Work Stealing (\c modular-ws) : \n
Maps tasks to workers in round robin, but allows workers to steal work from other workers.

- HEFT Scheduler : \n
Maps tasks to workers using a heuristic very close to
Heterogeneous Earliest Finish Time.
It needs that every task submitted to StarPU have a
defined performance model (\ref PerformanceModelCalibration)
to work efficiently, but can handle tasks without a performance
model. \c modular-heft just takes tasks by priority order. \c modular-heft takes
at most 5 tasks of the same priority and checks which one fits best. \c
modular-heft-prio is similar to \c modular-heft, but only decides the memory
node, not the exact worker, just pushing tasks to one central queue per memory
node.

To use one of these schedulers, one can set the environment variable \ref STARPU_SCHED.

\section StaticScheduling Static Scheduling

In some cases, one may want to force some scheduling, for instance force a given
set of tasks to GPU0, another set to GPU1, etc. while letting some other tasks
be scheduled on any other device. This can indeed be useful to guide StarPU into
some work distribution, while still letting some degree of dynamism. For
instance, to force execution of a task on CUDA0:

\code{.c}
task->execute_on_a_specific_worker = 1;
task->workerid = starpu_worker_get_by_type(STARPU_CUDA_WORKER, 0);
\endcode

One can also specify a set worker(s) which are allowed to take the task, as an
array of bit, for instance to allow workers 2 and 42:

\code{.c}
task->workerids = calloc(2,sizeof(uint32_t));
task->workerids[2/32] |= (1 << (2%32));
task->workerids[42/32] |= (1 << (42%32));
task->workerids_len = 2;
\endcode

One can also specify the order in which tasks must be executed by setting the
starpu_task::workerorder field. If this field is set to a non-zero value, it
provides the per-worker consecutive order in which tasks will be executed,
starting from 1. For a given of such task, the worker will thus not execute
it before all the tasks with smaller order value have been executed, notably
in case those tasks are not available yet due to some dependencies. This
eventually gives total control of task scheduling, and StarPU will only serve as
a "self-timed" task runtime. Of course, the provided order has to be runnable,
i.e. a task should should not depend on another task bound to the same worker
with a bigger order.

Note however that using scheduling contexts while statically scheduling tasks on workers
could be tricky. Be careful to schedule the tasks exactly on the workers of the corresponding
contexts, otherwise the workers' corresponding scheduling structures may not be allocated or
the execution of the application may deadlock. Moreover, the hypervisor should not be used when
statically scheduling tasks.

*/