configure.ac 50 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476
  1. # StarPU --- Runtime system for heterogeneous multicore architectures.
  2. #
  3. # Copyright (C) 2009, 2010, 2011 Université de Bordeaux 1
  4. # Copyright (C) 2010, 2011 Centre National de la Recherche Scientifique
  5. # Copyright (C) 2011 Télécom-SudParis
  6. #
  7. # StarPU is free software; you can redistribute it and/or modify
  8. # it under the terms of the GNU Lesser General Public License as published by
  9. # the Free Software Foundation; either version 2.1 of the License, or (at
  10. # your option) any later version.
  11. #
  12. # StarPU is distributed in the hope that it will be useful, but
  13. # WITHOUT ANY WARRANTY; without even the implied warranty of
  14. # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  15. #
  16. # See the GNU Lesser General Public License in COPYING.LGPL for more details.
  17. AC_INIT([StarPU],1.0.0, [starpu-devel@lists.gforge.inria.fr], starpu)
  18. AC_CONFIG_SRCDIR(include/starpu.h)
  19. AC_CONFIG_AUX_DIR([build-aux])
  20. AC_CANONICAL_SYSTEM
  21. dnl Automake 1.11 introduced `silent-rules' and `color-tests'. Use them
  22. dnl when they're available.
  23. m4_ifdef([AM_SILENT_RULES],
  24. [AM_INIT_AUTOMAKE([1.11 -Wall -Werror foreign silent-rules color-tests])],
  25. [AM_INIT_AUTOMAKE([1.10 -Wall -Werror foreign])])
  26. AC_PREREQ(2.60)
  27. AC_PROG_CC
  28. AC_PROG_CPP
  29. AC_PROG_SED
  30. AC_PROG_LN_S
  31. AC_PROG_F77
  32. LT_PREREQ([2.2])
  33. LT_INIT([win32-dll])
  34. AC_PROG_INSTALL
  35. AC_PROG_MKDIR_P
  36. AC_PROG_LN_S
  37. AC_HEADER_STDC
  38. AC_C_RESTRICT
  39. AC_PATH_PROGS([STARPU_MS_LIB], [lib])
  40. AC_ARG_VAR([STARPU_MS_LIB], [Path to Microsoft's Visual Studio `lib' tool])
  41. AM_CONDITIONAL([STARPU_HAVE_MS_LIB], [test "x$STARPU_MS_LIB" != "x"])
  42. case "$target" in
  43. *-*-mingw*|*-*-cygwin*)
  44. starpu_windows=yes
  45. libext=a
  46. AC_DEFINE(STARPU_HAVE_WINDOWS, [], [Define this on windows.])
  47. ;;
  48. esac
  49. AM_CONDITIONAL([STARPU_HAVE_WINDOWS], [test "x$starpu_windows" = "xyes"])
  50. # on Darwin, GCC targets i386 by default, so we don't have atomic ops
  51. AC_CHECK_SIZEOF([void *])
  52. SIZEOF_VOID_P=$ac_cv_sizeof_void_p
  53. if test x$SIZEOF_VOID_P = x4; then
  54. case "$target" in
  55. i386-*darwin*) CFLAGS+=" -march=i686 " ;;
  56. esac
  57. fi
  58. # This will be useful for program which use CUDA (and .cubin files) which need
  59. # some path to the CUDA code at runtime.
  60. AC_DEFINE_UNQUOTED(STARPU_BUILD_DIR, "$PWD", [location of StarPU build directory])
  61. AC_SUBST(STARPU_BUILD_DIR, $PWD)
  62. case "${srcdir}" in
  63. /*) AC_DEFINE_UNQUOTED(STARPU_SRC_DIR, "$(eval echo ${srcdir})", [location of StarPU sources])
  64. AC_SUBST(STARPU_SRC_DIR, "$(eval echo ${srcdir})") ;;
  65. *) AC_DEFINE_UNQUOTED(STARPU_SRC_DIR, "$(eval echo $PWD/${srcdir})", [location of StarPU sources])
  66. AC_SUBST(STARPU_SRC_DIR, "$(eval echo $PWD/${srcdir})") ;;
  67. esac
  68. AC_CHECK_LIB([pthread], [pthread_create])
  69. AC_COMPILE_IFELSE(
  70. AC_LANG_PROGRAM([[
  71. #include <pthread.h>
  72. ]], [[ pthread_t t; pthread_create(&t, NULL, NULL, NULL); ]]),,
  73. AC_MSG_ERROR([pthread_create unavailable]))
  74. AC_SEARCH_LIBS([sqrt],[m],,AC_MSG_ERROR([math library unavailable]))
  75. AC_HAVE_LIBRARY([ws2_32])
  76. AC_CHECK_FUNCS([sysconf])
  77. AC_CHECK_FUNC([pthread_spin_lock], have_pthread_spin_lock=yes, have_pthread_spin_lock=no)
  78. if test x$have_pthread_spin_lock = xyes; then
  79. AC_DEFINE(HAVE_PTHREAD_SPIN_LOCK,[],[pthread_spin_lock is available])
  80. fi
  81. # yes, that's non portable, but it's still better than sched_setaffinity
  82. AC_CHECK_FUNCS(pthread_setaffinity_np)
  83. # There is no posix_memalign on Mac OS X, only memalign
  84. AC_CHECK_FUNCS([posix_memalign], [AC_DEFINE([STARPU_HAVE_POSIX_MEMALIGN], [1], [Define to 1 if you have the `posix_memalign' function.])])
  85. AC_CHECK_FUNCS([memalign], [AC_DEFINE([STARPU_HAVE_MEMALIGN], [1], [Define to 1 if you have the `memalign' function.])])
  86. # Some systems don't have drand48
  87. AC_CHECK_FUNC([drand48], have_drand48=yes, have_drand48=no)
  88. # Maybe the user still does not want to use the provided drand48
  89. AC_ARG_ENABLE(default-drand48, [AS_HELP_STRING([--disable-default-drand48],
  90. [Do not use the default version of drand48])],
  91. enable_default_drand48=$enableval, enable_default_drand48=yes)
  92. if test x$have_drand48 = xyes -a x$enable_default_drand48 = xyes ; then
  93. AC_DEFINE([starpu_srand48(seed)],[srand48(seed)],[srand48 equivalent function])
  94. AC_DEFINE([starpu_drand48()],[drand48()],[drand48 equivalent function])
  95. AC_DEFINE([starpu_erand48(xsubi)],[erand48(xsubi)],[erand48 equivalent function])
  96. AC_DEFINE([starpu_srand48_r(seed, buffer)],[srand48_r(seed, buffer)],[srand48_r equivalent function])
  97. AC_DEFINE([starpu_erand48_r(xsubi, buffer, result)],[erand48_r(xsubi, buffer, result)],[erand48_r equivalent function])
  98. else
  99. AC_DEFINE([starpu_srand48(seed)],[srand(seed)],[srand48 equivalent function])
  100. AC_DEFINE([starpu_drand48()],[((double)(rand()) / RAND_MAX)],[drand48 equivalent function])
  101. AC_DEFINE([starpu_erand48(xsubi)],[starpu_drand48()],[erand48 equivalent function])
  102. AC_DEFINE([starpu_srand48_r(seed, buffer)],[srand((unsigned int)seed)],[srand48_r equivalent function])
  103. AC_DEFINE([starpu_erand48_r(xsubi, buffer, result)],[do {*(result) = ((double)(rand()) / RAND_MAX);} while (0);],[erand48_r equivalent function])
  104. fi
  105. # Define slow machine
  106. AC_ARG_ENABLE(slow-machine, [AS_HELP_STRING([--enable-slow-machine],
  107. [Lower default values for the testcases run by make check])],
  108. enable_slow_machine=$enableval, enable_slow_machine=false)
  109. if test x$enable_slow_machine = xyes; then
  110. AC_DEFINE(STARPU_SLOW_MACHINE, [1], [enable slow machine])
  111. fi
  112. AC_CHECK_HEADERS([malloc.h], [AC_DEFINE([STARPU_HAVE_MALLOC_H], [1], [Define to 1 if you have the <malloc.h> header file.])])
  113. # This defines HAVE_SYNC_VAL_COMPARE_AND_SWAP
  114. STARPU_CHECK_SYNC_VAL_COMPARE_AND_SWAP
  115. # This defines HAVE_SYNC_BOOL_COMPARE_AND_SWAP
  116. STARPU_CHECK_SYNC_BOOL_COMPARE_AND_SWAP
  117. # This defines HAVE_SYNC_FETCH_AND_ADD
  118. STARPU_CHECK_SYNC_FETCH_AND_ADD
  119. # This defines HAVE_SYNC_FETCH_AND_OR
  120. STARPU_CHECK_SYNC_FETCH_AND_OR
  121. # This defines HAVE_SYNC_LOCK_TEST_AND_SET
  122. STARPU_CHECK_SYNC_LOCK_TEST_AND_SET
  123. # This defines HAVE_SYNC_SYNCHRONIZE
  124. STARPU_CHECK_SYNC_SYNCHRONIZE
  125. CPPFLAGS="${CPPFLAGS} -D_GNU_SOURCE "
  126. STARPU_SEARCH_LIBS([LIBNUMA],[set_mempolicy],[numa],[enable_libnuma=yes],[enable_libnuma=no])
  127. AC_MSG_CHECKING(whether libnuma is available)
  128. AC_MSG_RESULT($enable_libnuma)
  129. if test x$enable_libnuma = xyes; then
  130. AC_DEFINE(STARPU_HAVE_LIBNUMA,[],[libnuma is available])
  131. fi
  132. ###############################################################################
  133. # #
  134. # CPUs settings #
  135. # #
  136. ###############################################################################
  137. AC_MSG_CHECKING(maximum number of CPUs)
  138. AC_ARG_ENABLE(maxcpus, [AS_HELP_STRING([--enable-maxcpus=<number>],
  139. [maximum number of CPUs])],
  140. maxcpus=$enableval, maxcpus=16)
  141. AC_MSG_RESULT($maxcpus)
  142. AC_DEFINE_UNQUOTED(STARPU_MAXCPUS, [$maxcpus], [Maximum number of CPUs supported])
  143. AC_MSG_CHECKING(whether CPUs should be used)
  144. AC_ARG_ENABLE(cpu, [AS_HELP_STRING([--disable-cpu],
  145. [do not use the CPU(s)])],
  146. enable_cpu=$enableval, enable_cpu=yes)
  147. AC_MSG_RESULT($enable_cpu)
  148. AC_SUBST(STARPU_USE_CPU, $enable_cpu)
  149. AM_CONDITIONAL(STARPU_USE_CPU, test x$enable_cpu = xyes)
  150. if test x$enable_cpu = xyes; then
  151. AC_DEFINE(STARPU_USE_CPU, [1], [CPU driver is activated])
  152. fi
  153. # How many parallel worker can we support ?
  154. nmaxcombinedworkers=`expr 2 \* $maxcpus`
  155. AC_DEFINE_UNQUOTED(STARPU_NMAX_COMBINEDWORKERS,
  156. [$nmaxcombinedworkers], [Maximum number of worker combinations])
  157. ###############################################################################
  158. # #
  159. # CUDA settings #
  160. # #
  161. ###############################################################################
  162. AC_MSG_CHECKING(maximum number of CUDA devices)
  163. AC_ARG_ENABLE(maxcudadev, [AS_HELP_STRING([--enable-maxcudadev=<number>],
  164. [maximum number of CUDA devices])],
  165. nmaxcudadev=$enableval, nmaxcudadev=4)
  166. AC_MSG_RESULT($nmaxcudadev)
  167. AC_DEFINE_UNQUOTED(STARPU_MAXCUDADEVS, [$nmaxcudadev],
  168. [maximum number of CUDA devices])
  169. AC_ARG_ENABLE(cuda, [AS_HELP_STRING([--disable-cuda],
  170. [do not use CUDA device(s)])],, [enable_cuda=maybe])
  171. #AC_MSG_CHECKING(whether CUDA is available)
  172. AC_ARG_WITH(cuda-dir,
  173. [AS_HELP_STRING([--with-cuda-dir=<path>],
  174. [specify CUDA installation directory])],
  175. [
  176. cuda_dir="$withval"
  177. # in case this was not explicit yet
  178. enable_cuda=yes
  179. ], cuda_dir=no)
  180. AC_ARG_WITH(cuda-include-dir,
  181. [AS_HELP_STRING([--with-cuda-include-dir=<path>],
  182. [specify where CUDA headers are installed])],
  183. [
  184. cuda_include_dir="$withval"
  185. # in case this was not explicit yet
  186. enable_cuda=yes
  187. ], [cuda_include_dir=no])
  188. AC_ARG_WITH(cuda-lib-dir,
  189. [AS_HELP_STRING([--with-cuda-lib-dir=<path>],
  190. [specify where CUDA libraries are installed])],
  191. [
  192. cuda_lib_dir="$withval"
  193. # in case this was not explicit yet
  194. enable_cuda=yes
  195. ], [cuda_lib_dir=no])
  196. AC_DEFUN([STARPU_CHECK_CUDA],
  197. [
  198. __cuda_dir=$1
  199. __cuda_lib_dir=$2
  200. if test "$__cuda_dir" != "no" ; then
  201. AC_MSG_CHECKING(whether CUDA is available in $__cuda_dir)
  202. else
  203. AC_MSG_CHECKING(whether CUDA is available)
  204. fi
  205. AC_MSG_RESULT()
  206. if test "$__cuda_lib_dir" = "no" -a "$__cuda_dir" != "no" ; then
  207. __cuda_lib_dir="$__cuda_dir/lib"
  208. fi
  209. SAVED_LDFLAGS="${LDFLAGS}"
  210. if test "$__cuda_dir" != "no" ; then
  211. STARPU_CUDA_LDFLAGS="-L${__cuda_lib_dir}"
  212. LDFLAGS="${SAVED_LDFLAGS} -L${__cuda_lib_dir}"
  213. fi
  214. AC_HAVE_LIBRARY([cuda],[have_valid_cuda=yes],[have_valid_cuda=no])
  215. unset ac_cv_lib_cuda_main
  216. if test "$have_valid_cuda" = "no" ; then
  217. if test "$__cuda_dir" != "no" ; then
  218. STARPU_CUDA_LDFLAGS="-L${__cuda_dir}/lib64"
  219. LDFLAGS="${SAVED_LDFLAGS} -L${__cuda_dir}/lib64"
  220. AC_HAVE_LIBRARY([cuda],[have_valid_cuda=yes],[have_valid_cuda=no])
  221. unset ac_cv_lib_cuda_main
  222. fi
  223. fi
  224. if test "$have_valid_cuda" = "no" ; then
  225. LDFLAGS="${SAVED_LDFLAGS}"
  226. unset STARPU_CUDA_LDFLAGS
  227. fi
  228. ])
  229. AC_DEFUN([STARPU_CHECK_CUDA_RUNTIME],
  230. [
  231. __cuda_dir=$1
  232. __cuda_include_dir=$2
  233. __cuda_lib_dir=$3
  234. if test "$__cuda_dir" != "no" ; then
  235. AC_MSG_CHECKING(whether CUDA RT is available in $__cuda_dir)
  236. else
  237. AC_MSG_CHECKING(whether CUDA RT is available)
  238. fi
  239. AC_MSG_RESULT()
  240. if test "$__cuda_include_dir" = "no" -a "$__cuda_dir" != "no" ; then
  241. __cuda_include_dir="$__cuda_dir/include"
  242. fi
  243. if test "$__cuda_lib_dir" = "no" -a "$__cuda_dir" != "no" ; then
  244. __cuda_lib_dir="$__cuda_dir/lib"
  245. fi
  246. SAVED_CPPFLAGS="$CPPFLAGS"
  247. SAVED_LDFLAGS="${LDFLAGS}"
  248. SAVED_STARPU_CUDA_LDFLAGS=${STARPU_CUDA_LDFLAGS}
  249. if test "$__cuda_lib_dir" != "no" ; then
  250. STARPU_CUDA_LDFLAGS="${SAVED_STARPU_CUDA_LDFLAGS} -L$__cuda_lib_dir"
  251. fi
  252. if test "$__cuda_include_dir" != "no" ; then
  253. CPPFLAGS="${CPPFLAGS} -I$__cuda_include_dir"
  254. fi
  255. AC_CHECK_HEADER([cuda.h],[have_valid_cuda=yes],[have_valid_cuda=no])
  256. unset ac_cv_header_cuda_h
  257. if test "$have_valid_cuda" = "yes" ; then
  258. if test "$__cuda_lib_dir" != "no"; then
  259. LDFLAGS="${SAVED_LDFLAGS} -L$__cuda_lib_dir"
  260. fi
  261. AC_HAVE_LIBRARY([cudart],[have_valid_cuda=yes],[have_valid_cuda=no])
  262. unset ac_cv_lib_cudart_main
  263. if test "$have_valid_cuda" = "no" ; then
  264. if test "$3" = "no" -a "$__cuda_dir" != "no" ; then
  265. __cuda_lib_dir="$__cuda_dir/lib64"
  266. LDFLAGS="${SAVED_LDFLAGS} -L$__cuda_lib_dir"
  267. STARPU_CUDA_LDFLAGS="${SAVED_STARPU_CUDA_LDFLAGS} -L$__cuda_lib_dir"
  268. AC_HAVE_LIBRARY([cudart],[have_valid_cuda=yes],[have_valid_cuda=no])
  269. unset ac_cv_lib_cudart_main
  270. fi
  271. fi
  272. fi
  273. if test "$have_valid_cuda" = "yes" ; then
  274. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lcudart"
  275. LDFLAGS="${SAVED_LDFLAGS} ${STARPU_CUDA_LDFLAGS}"
  276. # we also check that CUBLAS is available
  277. AC_HAVE_LIBRARY([cublas],[have_valid_cuda=yes],[have_valid_cuda=no])
  278. unset ac_cv_lib_cublas_main
  279. if test "$have_valid_cuda" = "yes" ; then
  280. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lcublas"
  281. fi
  282. fi
  283. CPPFLAGS="${SAVED_CPPFLAGS}"
  284. LDFLAGS="${SAVED_LDFLAGS}"
  285. if test "$have_valid_cuda" = "yes" -a "$__cuda_include_dir" != "no"; then
  286. STARPU_CUDA_CPPFLAGS="-I$__cuda_include_dir"
  287. NVCCFLAGS="${NVCCFLAGS} -I$__cuda_include_dir"
  288. fi
  289. ])
  290. if test x$enable_cuda = xyes -o x$enable_cuda = xmaybe; then
  291. STARPU_CHECK_CUDA($cuda_dir, $cuda_lib_dir)
  292. if test "$have_valid_cuda" = "no" ; then
  293. for f in "/usr/local/cuda" "/c/cuda" "/cygdrive/c/cuda" "/opt/cuda" "$CUDA_INC_PATH" "$CUDA_INSTALL_PATH"; do
  294. STARPU_CHECK_CUDA($f, "no")
  295. if test "$have_valid_cuda" = "yes" ; then
  296. break
  297. fi
  298. done
  299. fi
  300. if test "$have_valid_cuda" = "yes" ; then
  301. STARPU_CHECK_CUDA_RUNTIME($cuda_dir, $cuda_include_dir, $cuda_lib_dir)
  302. if test "$have_valid_cuda" = "no" ; then
  303. for f in "/usr/local/cuda" "/c/cuda" "/cygdrive/c/cuda" "/opt/cuda" "$CUDA_INC_PATH" "$CUDA_INSTALL_PATH"; do
  304. STARPU_CHECK_CUDA_RUNTIME($f, "no", "no")
  305. if test "$have_valid_cuda" = "yes" ; then
  306. break
  307. fi
  308. done
  309. fi
  310. fi
  311. # in case CUDA was explicitely required, but is not available, this is an error
  312. if test x$enable_cuda = xyes -a x$have_valid_cuda = no; then
  313. AC_MSG_ERROR([cannot find CUDA])
  314. fi
  315. # now we enable CUDA if and only if a proper setup is available
  316. enable_cuda=$have_valid_cuda
  317. fi
  318. if test x$enable_cuda = xyes; then
  319. AC_PATH_PROG([NVCC], [nvcc], [not-found],
  320. [$cuda_dir/bin:$PATH:/usr/local/cuda/bin:/usr/bin:/bin])
  321. if test "x$NVCC" = "xnot-found"; then
  322. AC_MSG_WARN(['nvcc' not found, disabling CUDA])
  323. enable_cuda=no
  324. fi
  325. fi
  326. AC_MSG_CHECKING(whether CUDA should be used)
  327. AC_MSG_RESULT($enable_cuda)
  328. AC_SUBST(STARPU_USE_CUDA, $enable_cuda)
  329. AM_CONDITIONAL(STARPU_USE_CUDA, test x$enable_cuda = xyes)
  330. if test x$enable_cuda = xyes; then
  331. AC_DEFINE(STARPU_USE_CUDA, [1], [CUDA support is activated])
  332. # On Darwin, the libstdc++ dependency is not automatically added by nvcc
  333. # case "$target" in
  334. # *-*darwin*) AC_HAVE_LIBRARY([stdc++], []) ;;
  335. # #*-*darwin*) AC_HAVE_LIBRARY([stdc++], [STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lstdc++"]) ;;
  336. # esac
  337. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lcuda"
  338. STARPU_CUFFT_LDFLAGS="-lcufft"
  339. if test "$F77" = "gfortran" ; then
  340. STARPU_CUDA_FORTRAN_LDFLAGS="-lgfortran"
  341. AC_SUBST(STARPU_CUDA_FORTRAN_LDFLAGS)
  342. fi
  343. #in case this is a 64bit setup, we tell nvcc to use a -m64 flag
  344. if test x$SIZEOF_VOID_P = x8; then
  345. NVCCFLAGS="${NVCCFLAGS} -m64"
  346. AC_SUBST(NVCCFLAGS)
  347. fi
  348. fi
  349. have_magma=no
  350. if test x$enable_cuda = xyes; then
  351. PKG_CHECK_MODULES([MAGMA], [magma], [
  352. AC_DEFINE([STARPU_HAVE_MAGMA], [1], [Define to 1 if you have the MAGMA library.])
  353. AC_SUBST([STARPU_HAVE_MAGMA], [1])
  354. have_magma=yes
  355. ], [:])
  356. fi
  357. AM_CONDITIONAL(STARPU_HAVE_MAGMA, [test x$have_magma = xyes])
  358. AC_MSG_CHECKING(whether MAGMA should be used)
  359. AC_MSG_RESULT($have_magma)
  360. # cufftDoubleComplex may not be available on an old CUDA setup
  361. AC_CHECK_TYPE(cufftDoubleComplex,
  362. [have_cufftdoublecomplex=yes],
  363. [have_cufftdoublecomplex=no], [#include <cufft.h>])
  364. AM_CONDITIONAL(STARPU_HAVE_CUFFTDOUBLECOMPLEX, test x$have_cufftdoublecomplex = xyes)
  365. if test x$have_cufftdoublecomplex = xyes; then
  366. AC_DEFINE(STARPU_HAVE_CUFFTDOUBLECOMPLEX, [1], [cufftDoubleComplex is available])
  367. fi
  368. # The CURAND library is only available since CUDA 3.2
  369. have_curand=$enable_cuda
  370. if test x$enable_cuda = xyes; then
  371. SAVED_LDFLAGS="${LDFLAGS}"
  372. LDFLAGS="${LDFLAGS} ${STARPU_CUDA_LDFLAGS}"
  373. AC_HAVE_LIBRARY([curand],[have_curand=yes],[have_curand=no])
  374. LDFLAGS="${SAVED_LDFLAGS}"
  375. fi
  376. AC_MSG_CHECKING(whether CURAND is available)
  377. AC_MSG_RESULT($have_curand)
  378. if test x$have_curand = xyes; then
  379. AC_DEFINE(STARPU_HAVE_CURAND,[1], [CURAND is available])
  380. STARPU_CURAND_LDFLAGS="$STARPU_CURAND_LDFLAGS -lcurand"
  381. AC_SUBST(STARPU_CURAND_LDFLAGS)
  382. fi
  383. # Peer transfers are only supported since CUDA 4.0
  384. # Disable them if user explicity wants to disable them
  385. AC_ARG_ENABLE(cuda_memcpy_peer, [AS_HELP_STRING([--disable-cuda-memcpy-peer], [do not allow peer transfers when using CUDA 4.0])],, [enable_cuda_memcpy_peer=yes])
  386. have_cuda_memcpy_peer=no
  387. if test x$enable_cuda_memcpy_peer = xyes -a x$enable_cuda = xyes ; then
  388. SAVED_LDFLAGS="${LDFLAGS}"
  389. LDFLAGS="${LDFLAGS} ${STARPU_CUDA_LDFLAGS}"
  390. AC_CHECK_FUNC([cudaMemcpyPeer], have_cuda_memcpy_peer=yes, have_cuda_memcpy_peer=no)
  391. LDFLAGS="${SAVED_LDFLAGS}"
  392. fi
  393. if test x$have_cuda_memcpy_peer = xyes; then
  394. AC_DEFINE(HAVE_CUDA_MEMCPY_PEER,[],[Peer transfers are supported in CUDA])
  395. fi
  396. if test x$enable_cuda = xyes; then
  397. if test x$starpu_windows != xyes ; then
  398. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lstdc++"
  399. fi
  400. AC_SUBST(STARPU_CUDA_LDFLAGS)
  401. AC_SUBST(STARPU_CUFFT_LDFLAGS)
  402. AC_SUBST(STARPU_CUDA_CPPFLAGS)
  403. fi
  404. ###############################################################################
  405. # #
  406. # OpenCL settings #
  407. # #
  408. ###############################################################################
  409. AC_MSG_CHECKING(maximum number of OpenCL devices)
  410. AC_ARG_ENABLE(maxopencldev, [AS_HELP_STRING([--enable-maxopencldev=<number>],
  411. [maximum number of OPENCL devices])],
  412. nmaxopencldev=$enableval, nmaxopencldev=8)
  413. AC_MSG_RESULT($nmaxopencldev)
  414. AC_DEFINE_UNQUOTED(STARPU_MAXOPENCLDEVS, [$nmaxopencldev],
  415. [maximum number of OPENCL devices])
  416. AC_ARG_ENABLE(opencl, [AS_HELP_STRING([--disable-opencl],
  417. [do not use OpenCL device(s)])],, [enable_opencl=maybe])
  418. AC_DEFUN([STARPU_CHECK_OPENCL],
  419. [
  420. __opencl_dir=$1
  421. __opencl_include_dir=$2
  422. __opencl_lib_dir=$3
  423. if test "$__opencl_dir" != "no" ; then
  424. AC_MSG_CHECKING(whether OpenCL is available in $__opencl_dir)
  425. else
  426. AC_MSG_CHECKING(whether OpenCL is available)
  427. fi
  428. AC_MSG_RESULT()
  429. if test "$__opencl_include_dir" = "no" -a "$__opencl_dir" != "no" ; then
  430. __opencl_include_dir="$__opencl_dir/include"
  431. fi
  432. if test "$__opencl_lib_dir" = "no" -a "$__opencl_dir" != "no" ; then
  433. __opencl_lib_dir="$__opencl_dir/lib"
  434. fi
  435. SAVED_CPPFLAGS="$CPPFLAGS"
  436. SAVED_LDFLAGS="${LDFLAGS}"
  437. if test "$__opencl_include_dir" != "no" ; then
  438. CPPFLAGS="${CPPFLAGS} -I$__opencl_include_dir"
  439. fi
  440. AC_CHECK_HEADER([CL/cl.h],[have_valid_opencl=yes],[have_valid_opencl=no])
  441. unset ac_cv_header_CL_cl_h
  442. if test "$have_valid_opencl" = "yes" ; then
  443. if test "$__opencl_lib_dir" != "no"; then
  444. LDFLAGS="${SAVED_LDFLAGS} -L$__opencl_lib_dir"
  445. fi
  446. AC_HAVE_LIBRARY([OpenCL],[have_valid_opencl=yes],[have_valid_opencl=no])
  447. unset ac_cv_lib_OpenCL_main
  448. if test "$have_valid_opencl" = "no" ; then
  449. if test "$3" = "no" -a "$__opencl_dir" != "no" ; then
  450. __opencl_lib_dir="$__opencl_dir/lib64"
  451. LDFLAGS="${SAVED_LDFLAGS} -L$__opencl_lib_dir"
  452. AC_HAVE_LIBRARY([OpenCL],[have_valid_opencl=yes],[have_valid_opencl=no])
  453. unset ac_cv_lib_OpenCL_main
  454. fi
  455. fi
  456. fi
  457. if test "$have_valid_opencl" = "yes" -a "$__opencl_include_dir" != "no"; then
  458. STARPU_OPENCL_CPPFLAGS="-I$__opencl_include_dir"
  459. AC_CHECK_HEADERS([CL/cl_ext.h])
  460. fi
  461. CPPFLAGS="${SAVED_CPPFLAGS}"
  462. LDFLAGS="${SAVED_LDFLAGS}"
  463. if test "$have_valid_opencl" = "yes" ; then
  464. if test "$__opencl_lib_dir" != "no"; then
  465. STARPU_OPENCL_LDFLAGS="-L$__opencl_lib_dir"
  466. fi
  467. STARPU_OPENCL_LDFLAGS="${STARPU_OPENCL_LDFLAGS} -lOpenCL"
  468. fi
  469. ])
  470. #AC_MSG_CHECKING(whether OpenCL is available)
  471. AC_ARG_WITH(opencl-dir,
  472. [AS_HELP_STRING([--with-opencl-dir=<path>],
  473. [specify OpenCL installation directory])],
  474. [
  475. opencl_dir="$withval"
  476. # in case this was not explicit yet
  477. enable_opencl=yes
  478. ], opencl_dir=no)
  479. AC_ARG_WITH(opencl-include-dir,
  480. [AS_HELP_STRING([--with-opencl-include-dir=<path>],
  481. [specify where OpenCL headers are installed])],
  482. [
  483. opencl_include_dir="$withval"
  484. # in case this was not explicit yet
  485. enable_opencl=yes
  486. ], [opencl_include_dir=no])
  487. AC_ARG_WITH(opencl-lib-dir,
  488. [AS_HELP_STRING([--with-opencl-lib-dir=<path>],
  489. [specify where OpenCL libraries are installed])],
  490. [
  491. opencl_lib_dir="$withval"
  492. # in case this was not explicit yet
  493. enable_opencl=yes
  494. ], [opencl_lib_dir=no])
  495. if test x$enable_opencl = xyes -o x$enable_opencl = xmaybe; then
  496. STARPU_CHECK_OPENCL($opencl_dir, $opencl_include_dir, $opencl_lib_dir)
  497. if test "$have_valid_opencl" = "no" ; then
  498. for f in "/usr/local/cuda" "/c/cuda" "/cygdrive/c/cuda" "/opt/cuda" "$CUDA_INC_PATH" "$CUDA_INSTALL_PATH" ; do
  499. if test -n $f ; then
  500. STARPU_CHECK_OPENCL($f, "no", "no")
  501. if test "$have_valid_opencl" = "yes" ; then
  502. break
  503. fi
  504. fi
  505. done
  506. fi
  507. # in case OpenCL was explicitely required, but is not available, this is an error
  508. if test x$enable_opencl = xyes -a x$have_valid_opencl = no; then
  509. AC_MSG_ERROR([cannot find OpenCL])
  510. fi
  511. # now we enable OpenCL if and only if a proper setup is available
  512. enable_opencl=$have_valid_opencl
  513. fi
  514. AC_MSG_CHECKING(whether OpenCL should be used)
  515. AC_MSG_RESULT($enable_opencl)
  516. AC_SUBST(STARPU_USE_OPENCL, $enable_opencl)
  517. AM_CONDITIONAL(STARPU_USE_OPENCL, test x$enable_opencl = xyes)
  518. if test x$enable_opencl = xyes ; then
  519. AC_DEFINE(STARPU_USE_OPENCL, [1], [OpenCL support is activated])
  520. STARPU_OPENCL_CPPFLAGS="${STARPU_OPENCL_CPPFLAGS} -DSTARPU_OPENCL_DATADIR=${datarootdir}/starpu/opencl"
  521. AC_SUBST(STARPU_OPENCL_DATAdir, "$(eval echo ${datarootdir}/starpu/opencl/examples)")
  522. AC_SUBST(STARPU_OPENCL_CPPFLAGS)
  523. AC_SUBST(STARPU_OPENCL_LDFLAGS)
  524. fi
  525. ###############################################################################
  526. # #
  527. # Cell settings #
  528. # #
  529. ###############################################################################
  530. #TODO fix the default dir
  531. AC_ARG_ENABLE(gordon, [AS_HELP_STRING([--enable-gordon],
  532. [use Cell SPUs])],, enable_gordon=maybe)
  533. if test x$enable_gordon = xyes -o x$enable_gordon = xmaybe; then
  534. AC_ARG_WITH(gordon-dir, [AS_HELP_STRING([--with-gordon-dir=<path>],
  535. [specify Gordon installation directory (default is /usr/local/)])],
  536. [
  537. gordon_dir="$withval"
  538. enable_gordon=yes
  539. ], gordon_dir=/usr/local/)
  540. # do we have a valid Gordon setup ?
  541. have_valid_gordon=yes
  542. # can we use dynamic code loading facilities ?
  543. AC_CHECK_LIB(elf, elf_memory,, [have_valid_gordon=no])
  544. AC_CHECK_LIB(spe2, spe_context_create,,[have_valid_gordon=no])
  545. AC_CHECK_FUNC(spe_in_mbox_write, [], [have_valid_gordon=no])
  546. PKG_PROG_PKG_CONFIG
  547. if test -d "$gordon_dir"; then
  548. PKG_CONFIG_PATH="${PKG_CONFIG_PATH}:$gordon_dir"
  549. fi
  550. AC_SUBST(PKG_CONFIG_PATH)
  551. PKG_CHECK_MODULES([GORDON], [libgordon], [], have_valid_gordon=no)
  552. CPPFLAGS="${CPPFLAGS} ${GORDON_CFLAGS}"
  553. LIBS="${LIBS} ${GORDON_LIBS}"
  554. # AC_CHECK_FUNC(gordon_init, [gordon], [have_valid_gordon=no])
  555. # in case Gordon was explicitely required, but is not available, this is an error
  556. if test x$enable_gordon = xyes -a x$have_valid_gordon = no; then
  557. AC_MSG_ERROR([cannot find Gordon])
  558. fi
  559. # now we enable Gordon if and only if a proper setup is available
  560. enable_gordon=$have_valid_gordon
  561. fi
  562. AC_MSG_CHECKING(whether GORDON should be used)
  563. AC_MSG_RESULT($enable_gordon)
  564. AC_SUBST(STARPU_USE_GORDON, $enable_gordon)
  565. AM_CONDITIONAL(STARPU_USE_GORDON, test x$enable_gordon = xyes)
  566. if test x$enable_gordon = xyes; then
  567. AC_DEFINE(STARPU_USE_GORDON, [1], [Cell support is enabled])
  568. GORDON_REQUIRES=gordon
  569. fi
  570. AC_SUBST(GORDON_REQUIRES)
  571. AC_MSG_CHECKING(whether blocking drivers should be disabled)
  572. AC_ARG_ENABLE(blocking-drivers, [AS_HELP_STRING([--disable-blocking-drivers], [disable blocking drivers])],
  573. enable_blocking=$enableval, enable_blocking=$enable_gordon)
  574. AC_MSG_RESULT($enable_blocking)
  575. if test x$enable_blocking = xno; then
  576. AC_DEFINE(STARPU_NON_BLOCKING_DRIVERS, [1], [drivers must progress])
  577. fi
  578. ###############################################################################
  579. # #
  580. # Debug and Performance analysis tools #
  581. # #
  582. ###############################################################################
  583. AC_MSG_CHECKING(whether debug mode should be enabled)
  584. AC_ARG_ENABLE(debug, [AS_HELP_STRING([--enable-debug], [enable debug mode])],
  585. enable_debug=$enableval, enable_debug=no)
  586. AC_MSG_RESULT($enable_debug)
  587. if test x$enable_debug = xyes; then
  588. CFLAGS="$CFLAGS -O0"
  589. AC_DEFINE(STARPU_SPINLOCK_CHECK, [1], [check spinlock use])
  590. else
  591. CFLAGS="$CFLAGS -O3"
  592. fi
  593. CFLAGS+=" -gdwarf-2 -g3 "
  594. AC_MSG_CHECKING(whether extra checks should be performed)
  595. AC_ARG_ENABLE(fast, [AS_HELP_STRING([--enable-fast],
  596. [do not enforce assertions])],
  597. enable_fast=$enableval, enable_fast=no)
  598. AC_MSG_RESULT($enable_fast)
  599. if test x$enable_fast = xyes; then
  600. AC_DEFINE(STARPU_NO_ASSERT, [1], [disable assertions])
  601. fi
  602. AC_MSG_CHECKING(whether memory status should be displayed)
  603. AC_ARG_ENABLE(memory-status, [AS_HELP_STRING([--enable-memory-status],
  604. [display memory status at the end of execution])],
  605. enable_memory_status=$enableval, enable_memory_status=no)
  606. AC_MSG_RESULT($enable_memory_status)
  607. if test x$enable_memory_status = xyes; then
  608. AC_DEFINE(STARPU_MEMORY_STATUS, [1], [display memory status])
  609. fi
  610. AC_MSG_CHECKING(whether debug messages should be displayed)
  611. AC_ARG_ENABLE(verbose, [AS_HELP_STRING([--enable-verbose],
  612. [display verbose debug messages])],
  613. enable_verbose=$enableval, enable_verbose=no)
  614. AC_MSG_RESULT($enable_verbose)
  615. if test x$enable_verbose = xyes; then
  616. AC_DEFINE(STARPU_VERBOSE, [1], [display verbose debug messages])
  617. fi
  618. AC_MSG_CHECKING(whether coverage testing should be enabled)
  619. AC_ARG_ENABLE(coverage, [AS_HELP_STRING([--enable-coverage],
  620. [enable coverage checking])],
  621. enable_coverage=$enableval, enable_coverage=no)
  622. AC_MSG_RESULT($enable_coverage)
  623. AC_SUBST(COVERAGE, $enable_coverage)
  624. AM_CONDITIONAL(STARPU_COVERAGE_ENABLED, [test "x$enable_coverage" = "xyes"])
  625. if test x$enable_coverage = xyes; then
  626. CPPFLAGS="${CPPFLAGS} --coverage"
  627. LDFLAGS="${LDFLAGS} --coverage"
  628. fi
  629. # shall we use FxT to generate trace of the execution ?
  630. AC_MSG_CHECKING(whether FxT traces should be generated)
  631. AC_ARG_WITH(fxt, [AS_HELP_STRING([--with-fxt[=<dir>]], [generate fxt traces])],
  632. [
  633. if test x$withval != xno; then
  634. use_fxt=yes
  635. if test x$withval = xyes; then
  636. AC_MSG_RESULT(yes)
  637. use_fxt_from_system=yes
  638. else
  639. # use specified path
  640. # TODO check if the dir is actually containing FxT
  641. use_fxt_from_system=no
  642. fxtdir=$withval
  643. AC_MSG_RESULT(yes using $fxtdir)
  644. AC_SUBST(FXTDIR, $fxtdir)
  645. fi
  646. else
  647. use_fxt=no
  648. AC_MSG_RESULT(no)
  649. fi
  650. ],
  651. [
  652. use_fxt=no
  653. AC_MSG_RESULT(no)
  654. ])
  655. AC_SUBST(STARPU_USE_FXT, $use_fxt)
  656. AM_CONDITIONAL(STARPU_USE_FXT, test x$use_fxt = xyes)
  657. if test x$use_fxt = xyes; then
  658. AC_DEFINE(STARPU_USE_FXT, [1], [enable FxT traces])
  659. AC_DEFINE(CONFIG_FUT, [1], [enable FUT traces])
  660. if test x$use_fxt_from_system = xno; then
  661. CPPFLAGS="${CPPFLAGS} -I$fxtdir/include/ "
  662. LDFLAGS="${LDFLAGS} -L$fxtdir/lib/ -lfxt"
  663. else
  664. PKG_CHECK_MODULES([FXT], [fxt])
  665. fi
  666. # if we use monotonic clocks, FxT uses -lrt
  667. AC_CHECK_LIB(rt, clock_gettime,,AC_MSG_ERROR([cannot find clock_gettime]))
  668. fi
  669. AC_MSG_CHECKING(whether performance debugging should be enabled)
  670. AC_ARG_ENABLE(perf-debug, [AS_HELP_STRING([--enable-perf-debug],
  671. [enable performance debugging through gprof])],
  672. enable_perf_debug=$enableval, enable_perf_debug=no)
  673. AC_MSG_RESULT($enable_perf_debug)
  674. AC_SUBST(STARPU_PERF_DEBUG, $enable_perf_debug)
  675. if test x$enable_perf_debug = xyes; then
  676. AC_DEFINE(STARPU_PERF_DEBUG, [1], [enable performance debug])
  677. CPPFLAGS="${CPPFLAGS} -pg -fprofile-arcs "
  678. LDFLAGS="${LDFLAGS} -pg -fprofile-arcs "
  679. fi
  680. AC_MSG_CHECKING(whether performance model debugging should be enabled)
  681. AC_ARG_ENABLE(model-debug, [AS_HELP_STRING([--enable-model-debug],
  682. [enable performance model debugging])],
  683. enable_model_debug=$enableval, enable_model_debug=no)
  684. AC_MSG_RESULT($enable_model_debug)
  685. if test x$enable_model_debug = xyes; then
  686. AC_DEFINE(STARPU_MODEL_DEBUG, [1], [enable performance model debug])
  687. fi
  688. AC_MSG_CHECKING(whether statistics should be generated)
  689. AC_ARG_ENABLE(stats, [AS_HELP_STRING([--enable-stats],
  690. [enable statistics])],
  691. enable_stats=$enableval, enable_stats=no)
  692. AC_MSG_RESULT($enable_stats)
  693. AC_SUBST(STATS, $enable_stats)
  694. AC_SUBST(STARPU_DATA_STATS, $enable_stats)
  695. if test x$enable_stats = xyes; then
  696. AC_DEFINE(STARPU_DATA_STATS, [1], [enable statistics])
  697. fi
  698. AC_CHECK_HEADERS([glpk.h])
  699. STARPU_HAVE_LIBRARY(GLPK, [glpk])
  700. ###############################################################################
  701. # #
  702. # Miscellaneous options for StarPU #
  703. # #
  704. ###############################################################################
  705. AC_MSG_CHECKING(how many buffers can be manipulated per task)
  706. AC_ARG_ENABLE(maxbuffers, [AS_HELP_STRING([--enable-maxbuffers=<nbuffers>],
  707. [maximum number of buffers per task])],
  708. nmaxbuffers=$enableval, nmaxbuffers=8)
  709. AC_MSG_RESULT($nmaxbuffers)
  710. AC_DEFINE_UNQUOTED(STARPU_NMAXBUFS, [$nmaxbuffers],
  711. [how many buffers can be manipulated per task])
  712. # We have one memory node shared by all CPU workers, one node per GPU, and
  713. # currently the Cell driver is using the same memory node as the CPU.
  714. maxnodes=1
  715. if test x$enable_cuda = xyes ; then
  716. # we could have used nmaxcudadev + 1, but this would certainly give an
  717. # odd number.
  718. maxnodes=`expr $maxnodes + $nmaxcudadev`
  719. fi
  720. if test x$enable_opencl = xyes ; then
  721. # we could have used nmaxcudadev + 1, but this would certainly give an
  722. # odd number.
  723. maxnodes=`expr $maxnodes + $nmaxopencldev`
  724. fi
  725. # todo: set maxnodes to the next power of 2 greater than maxnodes
  726. AC_MSG_CHECKING(maximum number of memory nodes)
  727. AC_MSG_RESULT($maxnodes)
  728. AC_DEFINE_UNQUOTED(STARPU_MAXNODES, [$maxnodes],
  729. [maximum number of memory nodes])
  730. AC_MSG_CHECKING(whether allocation cache should be used)
  731. AC_ARG_ENABLE(allocation-cache, [AS_HELP_STRING([--enable-allocation-cache],
  732. [enable data allocation cache])],
  733. enable_allocation_cache=$enableval, enable_allocation_cache=no)
  734. AC_MSG_RESULT($enable_allocation_cache)
  735. if test x$enable_allocation_cache = xyes; then
  736. AC_DEFINE(STARPU_USE_ALLOCATION_CACHE, [1], [enable data allocation cache])
  737. fi
  738. AC_ARG_WITH(perf-model-dir, [AS_HELP_STRING([--with-perf-model-dir=<dir>], [specify where performance models shoulds be stored])],
  739. [
  740. if test x$withval = xno; then
  741. AC_MSG_ERROR(--without-perf-model-dir is not a valid option)
  742. fi
  743. perf_model_dir="$withval"
  744. have_explicit_perf_model_dir=yes
  745. AC_DEFINE_UNQUOTED(STARPU_PERF_MODEL_DIR, ["$perf_model_dir"], [performance models location])
  746. ], [
  747. # by default, we put the performance models in
  748. # $HOME/.starpu/sampling/
  749. have_explicit_perf_model_dir=no
  750. perf_model_dir="\$HOME/.starpu/sampling/"
  751. ]
  752. )
  753. AC_MSG_CHECKING(using explicit performance model location)
  754. AC_MSG_RESULT($have_explicit_perf_model_dir)
  755. AC_MSG_CHECKING(performance models location)
  756. AC_MSG_RESULT($perf_model_dir)
  757. # On many multicore CPUs, clock cycles are not synchronized
  758. AC_CHECK_LIB([rt], [clock_gettime])
  759. AC_CHECK_FUNCS([clock_gettime])
  760. # Compute the maximum number of workers (we round it to 16 for alignment
  761. # purposes).
  762. nmaxworkers=`expr 16 \* \( \( $maxcpus + $nmaxcudadev + $nmaxopencldev + 15 \) / 16 \) `
  763. AC_MSG_CHECKING(Maximum number of workers)
  764. AC_MSG_RESULT($nmaxworkers)
  765. AC_DEFINE_UNQUOTED(STARPU_NMAXWORKERS, [$nmaxworkers], [Maximum number of workers])
  766. # Computes the maximum number of implementations per arch
  767. AC_MSG_CHECKING(maximum number of implementations)
  768. AC_ARG_ENABLE(maximplementations, [AS_HELP_STRING([--enable-maximplementations=<number>],
  769. [maximum number of implementations])],
  770. maximplementations=$enableval, maximplementations=4)
  771. AC_MSG_RESULT($maximplementations)
  772. AC_DEFINE_UNQUOTED(STARPU_MAXIMPLEMENTATIONS, [$maximplementations],
  773. [maximum number of implementations])
  774. ###############################################################################
  775. # #
  776. # MPI #
  777. # #
  778. ###############################################################################
  779. AC_ARG_WITH(mpicc, [AS_HELP_STRING([--with-mpicc[=<path to mpicc>]],
  780. [Path of the mpicc compiler])],
  781. [
  782. if test x$withval = xyes; then
  783. AC_MSG_ERROR(--with-mpicc must be given a pathname)
  784. else
  785. mpicc_path=$withval
  786. fi
  787. ],
  788. [
  789. # nothing was specified: default value is used
  790. AC_PATH_PROG(mpicc_path, mpicc, [no], [])
  791. ])
  792. # We test if the MPICC compiler exists
  793. if test ! -x $mpicc_path; then
  794. #MPICC does not exists or is not executable
  795. AC_MSG_RESULT(The mpicc compiler is not valid)
  796. use_mpi=no
  797. else
  798. use_mpi=yes
  799. fi
  800. AC_MSG_CHECKING(mpicc path)
  801. AC_MSG_RESULT($mpicc_path)
  802. AC_SUBST(MPICC, $mpicc_path)
  803. if test x$use_mpi = xyes; then
  804. cc_or_mpicc=$mpicc_path
  805. else
  806. cc_or_mpicc=$CC
  807. fi
  808. AC_SUBST(CC_OR_MPICC, $cc_or_mpicc)
  809. # If the user specifically asks for it, or if we are in a developer checkout, we enable mpi check
  810. AC_ARG_ENABLE(mpi-check, AC_HELP_STRING([--enable-mpi-check], [Enable execution of MPI testcases]))
  811. running_mpi_check=0
  812. if test -d "$srcdir/.svn" ; then
  813. running_mpi_check=yes
  814. fi
  815. if test x$enable_mpi_check = xyes ; then
  816. running_mpi_check=yes
  817. fi
  818. if test x$enable_mpi_check = xno ; then
  819. running_mpi_check=no
  820. fi
  821. # Check if mpiexec is available
  822. AC_ARG_WITH(mpiexec, [AS_HELP_STRING([--with-mpiexec[=<path to mpiexec>]],
  823. [Path of mpiexec])],
  824. [
  825. if test x$withval = xyes; then
  826. AC_MSG_ERROR(--with-mpiexec must be given a pathname)
  827. else
  828. mpiexec_path=$withval
  829. fi
  830. ],
  831. [
  832. # nothing was specified: look in the path
  833. AC_PATH_PROG(mpiexec_path, mpiexec, [no], [$(dirname $mpicc_path):$PATH])
  834. ])
  835. AC_MSG_CHECKING(whether mpiexec is available)
  836. AC_MSG_RESULT($mpiexec_path)
  837. # We test if MPIEXEC exists
  838. if test ! -x $mpiexec_path; then
  839. #MPIEXEC does not exists or is not executable
  840. AC_MSG_RESULT(The mpiexec script is not valid)
  841. running_mpi_check=no
  842. mpiexec_path=""
  843. fi
  844. AM_CONDITIONAL(STARPU_MPI_CHECK, test x$running_mpi_check = xyes)
  845. if test x$use_mpi = xyes; then
  846. AC_MSG_CHECKING(whether MPI tests should be run)
  847. AC_MSG_RESULT($running_mpi_check)
  848. AC_SUBST(MPIEXEC,$mpiexec_path)
  849. fi
  850. AC_MSG_CHECKING(whether the StarPU MPI library should be generated)
  851. AC_MSG_RESULT($use_mpi)
  852. AC_SUBST(USE_MPI, $use_mpi)
  853. AM_CONDITIONAL(USE_MPI, test x$use_mpi = xyes)
  854. if test x$use_mpi = xyes; then
  855. AC_DEFINE(STARPU_USE_MPI,[],[whether the StarPU MPI library is available])
  856. fi
  857. ###############################################################################
  858. # #
  859. # StarPU-Top #
  860. # #
  861. ###############################################################################
  862. build_starpu_top=no
  863. AC_PATH_PROGS([QMAKE], [qmake-qt4 qmake], [not-found])
  864. if test x$QMAKE != xnot-found; then
  865. QMAKE_VERSION=`$QMAKE --version 2>&1 | head -n 1 | cut -d '.' -f 1 | cut -d ' ' -f 3`
  866. if test $QMAKE_VERSION -ge 2 ; then
  867. PKG_CHECK_EXISTS([QtGui QtNetwork QtOpenGL QtSql], [
  868. QT_MAJVERSION=`$PKG_CONFIG --modversion QtGui | cut -d '.' -f 1`
  869. QT_MINVERSION=`$PKG_CONFIG --modversion QtGui | cut -d '.' -f 2`
  870. if test $QT_MAJVERSION -gt 4 -o \( $QT_MAJVERSION -eq 4 -a $QT_MINVERSION -ge 7 \) ; then
  871. build_starpu_top=yes
  872. fi
  873. QWT_PRI=embed
  874. AC_ARG_WITH(qwt-include-dir,
  875. [AS_HELP_STRING([--with-qwt-include-dir=<path>],
  876. [specify installed libqwt include path])],
  877. [
  878. STARPU_QWT_CPPFLAGS="-I$withval"
  879. AC_SUBST(STARPU_QWT_CPPFLAGS)
  880. QWT_PRI=system
  881. ])
  882. AC_ARG_WITH(qwt-lib-dir,
  883. [AS_HELP_STRING([--with-qwt-lib-dir=<path>],
  884. [specify installed libqwt library path])],
  885. [
  886. STARPU_QWT_LDFLAGS="-L$withval"
  887. QWT_PRI=system
  888. ])
  889. AC_ARG_WITH(qwt-lib,
  890. [AS_HELP_STRING([--with-qwt-lib=<name>],
  891. [specify installed libqwt library name])],
  892. [
  893. STARPU_QWT_LDFLAGS="${STARPU_QWT_LDFLAGS} -l$withval"
  894. QWT_PRI=system
  895. ])
  896. AC_SUBST(QWT_PRI)
  897. ])
  898. fi
  899. fi
  900. AM_CONDITIONAL(BUILD_STARPU_TOP, test x$build_starpu_top = xyes)
  901. ###############################################################################
  902. # #
  903. # Flags for C Compiler #
  904. # #
  905. ###############################################################################
  906. # IS_SUPPORTED_CFLAG(flag)
  907. # ------------------------
  908. # Check if the CFLAGS `flag' is supported by the compiler
  909. AC_DEFUN([IS_SUPPORTED_CFLAG],
  910. [
  911. AC_REQUIRE([AC_PROG_CC])
  912. AC_MSG_CHECKING([whether compiler support $1])
  913. SAVED_CFLAGS="$CFLAGS"
  914. CFLAGS="$1 -we10006"
  915. AC_COMPILE_IFELSE(
  916. AC_LANG_PROGRAM(
  917. [[]],
  918. [[
  919. AC_LANG_SOURCE([
  920. const char *hello = "Hello World";
  921. ])
  922. ]]
  923. ),
  924. [
  925. GLOBAL_AM_CFLAGS="$GLOBAL_AM_CFLAGS $1"
  926. AC_MSG_RESULT(yes)
  927. ],
  928. AC_MSG_RESULT(no)
  929. )
  930. CFLAGS="$SAVED_CFLAGS"
  931. ])
  932. IS_SUPPORTED_CFLAG(-W)
  933. IS_SUPPORTED_CFLAG(-Wall)
  934. IS_SUPPORTED_CFLAG(-Wextra)
  935. AC_SUBST(GLOBAL_AM_CFLAGS)
  936. if test "x$STARPU_DEVEL" != x; then
  937. AC_DEFINE(STARPU_DEVEL, [1], [enable developer warnings])
  938. fi
  939. ###############################################################################
  940. # #
  941. # GCC extensions #
  942. # #
  943. ###############################################################################
  944. AC_ARG_ENABLE([gcc-extensions],
  945. [AS_HELP_STRING([--enable-gcc-extensions],
  946. [build the GCC plug-in that provides C language extensions (experimental)])],
  947. [enable_gcc_plugin="$enableval"],
  948. [enable_gcc_plugin="no"])
  949. if test "x$enable_gcc_plugin" = "xyes"; then
  950. STARPU_GCC_PLUGIN_SUPPORT
  951. if test "x$ac_cv_have_gcc_plugins" != "xyes"; then
  952. AC_MSG_ERROR([This compiler lacks GCC plug-in support.])
  953. fi
  954. build_gcc_plugin="yes"
  955. # GNU Guile 1.8/2.0 is used to run the test suite.
  956. AC_PATH_PROG([GUILE], [guile])
  957. if test "x$GUILE" != "x"; then
  958. run_gcc_plugin_test_suite="yes"
  959. else
  960. run_gcc_plugin_test_suite="no"
  961. fi
  962. else
  963. build_gcc_plugin="no"
  964. run_gcc_plugin_test_suite="no"
  965. fi
  966. # Bison is used to generate the C expression parser. The generated
  967. # parser is part of the distribution, though.
  968. AC_PROG_YACC
  969. AM_CONDITIONAL([BUILD_GCC_PLUGIN], [test "x$build_gcc_plugin" = "xyes"])
  970. AM_CONDITIONAL([HAVE_GUILE], [test "x$GUILE" != "x"])
  971. ###############################################################################
  972. # #
  973. # OpenCL interface #
  974. # #
  975. ###############################################################################
  976. AC_ARG_ENABLE([socl],
  977. [AS_HELP_STRING([--enable-socl],
  978. [build the OpenCL interface (SOCL)])],
  979. [enable_socl="$enableval"],
  980. [enable_socl="no"])
  981. if test "x$enable_socl" = "xyes"; then
  982. STARPU_SOCL_SUPPORT
  983. build_socl="yes"
  984. else
  985. build_socl="no"
  986. run_socl_test_suite="no"
  987. fi
  988. AM_CONDITIONAL([BUILD_SOCL], [test "x$build_socl" = "xyes"])
  989. AM_CONDITIONAL([STARPU_USE_SOCL], [test "x$build_socl" = "xyes"])
  990. ###############################################################################
  991. # #
  992. # Examples #
  993. # #
  994. ###############################################################################
  995. AC_ARG_ENABLE(opengl-render, [AS_HELP_STRING([--enable-opengl-render],
  996. [enable OpenGL rendering of some examples])],
  997. enable_opengl_render=$enableval, enable_opengl_render=no)
  998. if test x$enable_opengl_render = xyes; then
  999. STARPU_CHECK_LIB(OPENGL_RENDER, glut, glutInit,,AC_MSG_ERROR([cannot find glut]))
  1000. STARPU_CHECK_LIB(OPENGL_RENDER, GL, glXCreateContext,,AC_MSG_ERROR([cannot find GL]))
  1001. STARPU_CHECK_LIB(OPENGL_RENDER, GLU, gluLookAt,,AC_MSG_ERROR([cannot find GLU]))
  1002. AC_DEFINE(STARPU_OPENGL_RENDER, [1], [enable OpenGL rendering of some examples])
  1003. fi
  1004. AC_MSG_CHECKING(whether OpenGL rendering is enabled)
  1005. AC_SUBST(STARPU_OPENGL_RENDER, $enable_opengl_render)
  1006. AC_MSG_RESULT($enable_opengl_render)
  1007. AC_PATH_XTRA
  1008. if test "x$x_includes" != "xNONE"; then
  1009. AC_DEFINE(STARPU_HAVE_X11, [1], [enable X11])
  1010. fi
  1011. AM_CONDITIONAL([HAVE_X11], [test "x$x_includes" != "xNONE"])
  1012. # In case there are BLAS kernels that are used by the example applications
  1013. # we may specify which library to use. Note that this is not used for StarPU
  1014. # itself.
  1015. blas_lib=maybe
  1016. AC_ARG_ENABLE(blas-lib,
  1017. [ --enable-blas-lib[=blaslibname]:
  1018. none [default]: no BLAS lib is used
  1019. atlas: use ATLAS library
  1020. goto: use GotoBLAS library],
  1021. [
  1022. if test "x$enableval" = "xatlas" ; then
  1023. blas_lib=atlas
  1024. elif test "x$enableval" = "xgoto" ; then
  1025. blas_lib=goto
  1026. elif test "x$enableval" = "xnone" ; then
  1027. blas_lib=none
  1028. elif test x$enableval = xno; then
  1029. blas_lib=none
  1030. else
  1031. echo
  1032. echo "Error!"
  1033. echo "Unknown BLAS library"
  1034. exit -1
  1035. fi
  1036. ])
  1037. if test x$blas_lib = xmaybe -o x$blas_lib = xgoto; then
  1038. AC_ARG_WITH(goto-dir, [AS_HELP_STRING([--with-goto-dir=<dir>], [specify GotoBLAS lib location])],
  1039. [
  1040. blas_lib=goto
  1041. gotodir=$withval
  1042. AC_SUBST(GOTODIR, $gotodir)
  1043. CPPFLAGS="${CPPFLAGS} -I$gotodir/ "
  1044. LDFLAGS="${LDFLAGS} -L$gotodir/ "
  1045. ]
  1046. )
  1047. if test x$blas_lib = xgoto; then
  1048. STARPU_CHECK_LIB(BLAS, gfortran, main,,)
  1049. # Perhaps that GotoBLAS2 is available instead (so that we have libgotoblas2.{so,a})
  1050. STARPU_CHECK_LIB(BLAS, goto2, sgemm_,, [havegoto2=no], [$STARPU_BLAS_LDFLAGS])
  1051. if test x$havegoto2 = xno; then
  1052. STARPU_CHECK_LIB(BLAS, goto, sgemm_,,AC_MSG_ERROR([cannot find goto lib]), [$STARPU_BLAS_LDFLAGS])
  1053. fi
  1054. AC_DEFINE(STARPU_GOTO, [1], [use STARPU_GOTO library])
  1055. fi
  1056. fi
  1057. if test x$blas_lib = xmaybe -o x$blas_lib = xatlas; then
  1058. AC_ARG_WITH(atlas-dir, [AS_HELP_STRING([--with-atlas-dir=<dir>], [specify ATLAS lib location])],
  1059. [
  1060. AC_MSG_CHECKING(STARPU_ATLAS location)
  1061. blas_lib=atlas
  1062. atlasdir=$withval
  1063. AC_MSG_RESULT($atlasdir)
  1064. AC_SUBST(ATLASDIR, $atlasdir)
  1065. CPPFLAGS="${CPPFLAGS} -I$atlasdir/include/ "
  1066. LDFLAGS="${LDFLAGS} -L$atlasdir/lib/ "
  1067. ]
  1068. )
  1069. if test x$blas_lib = xatlas; then
  1070. # test whether STARPU_ATLAS is actually available
  1071. AC_CHECK_HEADER([cblas.h],,AC_MSG_ERROR([cannot find atlas headers]))
  1072. STARPU_CHECK_LIB(BLAS, atlas, ATL_sgemm,,AC_MSG_ERROR([cannot find atlas lib]),)
  1073. STARPU_CHECK_LIB(BLAS, cblas, cblas_sgemm,,AC_MSG_ERROR([cannot find atlas lib]),[-latlas])
  1074. AC_DEFINE(STARPU_ATLAS, [1], [use STARPU_ATLAS library])
  1075. fi
  1076. fi
  1077. if test x$blas_lib = xmaybe; then
  1078. # Should we use MKL ?
  1079. AC_ARG_WITH(mkl-cflags, [AS_HELP_STRING([--with-mkl-cflags], [specify MKL compilation flags])],
  1080. [
  1081. CPPFLAGS="${CPPFLAGS} $withval"
  1082. blas_lib=mkl
  1083. ])
  1084. AC_ARG_WITH(mkl-ldflags, [AS_HELP_STRING([--with-mkl-ldflags], [specify MKL linking flags])],
  1085. [
  1086. LDFLAGS="${LDFLAGS} $withval"
  1087. blas_lib=mkl
  1088. ])
  1089. if test x$blas_lib = xmkl; then
  1090. AC_DEFINE(STARPU_MKL, [1], [use MKL library])
  1091. fi
  1092. fi
  1093. if test x$blas_lib = xmaybe; then
  1094. #perhaps it is possible to use some BLAS lib from the system
  1095. use_system_blas=no
  1096. STARPU_SEARCH_LIBS(BLAS,[sgemm_],[blas],use_system_blas=yes,,)
  1097. if test x$use_system_blas = xyes; then
  1098. AC_DEFINE(STARPU_SYSTEM_BLAS, [1], [use refblas library])
  1099. blas_lib=system
  1100. else
  1101. blas_lib=none
  1102. fi
  1103. fi
  1104. AM_CONDITIONAL(ATLAS_BLAS_LIB, test x$blas_lib = xatlas)
  1105. AM_CONDITIONAL(GOTO_BLAS_LIB, test x$blas_lib = xgoto)
  1106. AM_CONDITIONAL(MKL_BLAS_LIB, test x$blas_lib = xmkl)
  1107. AM_CONDITIONAL(SYSTEM_BLAS_LIB, test x$blas_lib = xsystem)
  1108. AM_CONDITIONAL(NO_BLAS_LIB, test x$blas_lib = xnone)
  1109. AC_MSG_CHECKING(which BLAS lib should be used)
  1110. AC_MSG_RESULT($blas_lib)
  1111. AC_SUBST(BLAS_LIB,$blas_lib)
  1112. ##########################################
  1113. # FFT #
  1114. ##########################################
  1115. have_fftw=no
  1116. have_fftwf=no
  1117. have_fftwl=no
  1118. PKG_CHECK_MODULES([FFTW], [fftw3], [
  1119. AC_DEFINE([STARPU_HAVE_FFTW], [1], [Define to 1 if you have the libfftw3 library.])
  1120. AC_SUBST([STARPU_HAVE_FFTW], [1])
  1121. have_fftw=yes
  1122. ], [:])
  1123. AM_CONDITIONAL(STARPU_HAVE_FFTW, [test x$have_fftw = xyes])
  1124. PKG_CHECK_MODULES([FFTWF], [fftw3f], [
  1125. AC_DEFINE([STARPU_HAVE_FFTWF], [1], [Define to 1 if you have the libfftw3f library.])
  1126. AC_SUBST([STARPU_HAVE_FFTWF], [1])
  1127. have_fftwf=yes
  1128. ], [:])
  1129. AM_CONDITIONAL(STARPU_HAVE_FFTWF, [test x$have_fftwf = xyes])
  1130. PKG_CHECK_MODULES([FFTWL], [fftw3l], [
  1131. AC_DEFINE([STARPU_HAVE_FFTWL], [1], [Define to 1 if you have the libfftw3l library.])
  1132. AC_SUBST([HAVE_FFTWFL], [1])
  1133. have_fftwl=yes
  1134. ], [:])
  1135. AM_CONDITIONAL(STARPU_HAVE_FFTWL, [test x$have_fftwl = xyes])
  1136. ##########################################
  1137. # hwloc #
  1138. ##########################################
  1139. AC_ARG_WITH([hwloc], [AS_HELP_STRING([--without-hwloc], [Disable hwloc (enabled by default)])])
  1140. SAVED_LDFLAGS="${LDFLAGS}"
  1141. SAVED_CPPFLAGS="${CPPFLAGS}"
  1142. AS_IF([test "x$with_hwloc" != "xno"], [
  1143. PKG_CHECK_MODULES([HWLOC],[hwloc], [
  1144. have_valid_hwloc=yes
  1145. have_pkgconfig_hwloc=yes], [
  1146. have_valid_hwloc=no
  1147. have_pkgconfig_hwloc=no])
  1148. AS_IF([test "$have_valid_hwloc" = "no"], [
  1149. hwloc_dir="$withval"
  1150. CPPFLAGS="${SAVED_CPPFLAGS} -I$hwloc_dir/include"
  1151. AC_CHECK_HEADER([hwloc.h],[have_valid_hwloc=yes],[have_valid_hwloc=no])
  1152. LDFLAGS="${SAVED_LDFLAGS} -L$hwloc_dir/lib"
  1153. AC_HAVE_LIBRARY([hwloc],[have_valid_hwloc=yes],[have_valid_hwloc=no])
  1154. ])
  1155. ],
  1156. have_valid_hwloc="no")
  1157. AS_IF([test "$have_valid_hwloc" = "yes"], [
  1158. AC_DEFINE([STARPU_HAVE_HWLOC], [1], [Define to 1 if you have the hwloc library.])
  1159. HWLOC_REQUIRES=hwloc
  1160. AC_SUBST([STARPU_HAVE_HWLOC], [1])
  1161. AS_IF([test "$have_pkgconfig_hwloc" = "no"], [
  1162. HWLOC_CFLAGS="-I$hwloc_dir/include"
  1163. HWLOC_LIBS="-L$hwloc_dir/lib -lhwloc"])
  1164. ])
  1165. LDFLAGS="${SAVED_LDFLAGS}"
  1166. CPPFLAGS="${SAVED_CPPFLAGS}"
  1167. AC_MSG_CHECKING(whether hwloc should be used)
  1168. AC_MSG_RESULT($have_valid_hwloc)
  1169. AC_SUBST(HWLOC_REQUIRES)
  1170. # is the header file f77.h available ?
  1171. have_f77_h=yes
  1172. AC_CHECK_HEADER([f77.h],,[have_f77_h=no])
  1173. AC_MSG_CHECKING(whether header file f77.h is available)
  1174. AC_MSG_RESULT($have_f77_h)
  1175. AC_SUBST(STARPU_HAVE_F77_H, $have_f77_h)
  1176. AM_CONDITIONAL(STARPU_HAVE_F77_H, test x$have_f77_h = xyes)
  1177. if test x$have_f77_h = xyes; then
  1178. AC_DEFINE([STARPU_HAVE_F77_H], [1], [Define to 1 if you have the <f77.h> header file.])
  1179. fi
  1180. # Do we want to run optional tests
  1181. AC_MSG_CHECKING(whether optional tests should be run)
  1182. AC_ARG_ENABLE(optional_tests, [AS_HELP_STRING([--optional-tests],
  1183. [run optional tests])],
  1184. want_optional_tests=$enableval, want_optional_tests=no)
  1185. AC_MSG_RESULT($want_optional_tests)
  1186. AM_CONDITIONAL([COND_OPT], [test "$want_optional_tests" = yes])
  1187. # Check if icc is available
  1188. AC_CHECK_PROGS([ICC], [icc])
  1189. # If cuda and icc are both available, check they are compatible
  1190. if test "$enable_cuda" = "yes" -a "$ICC" != ""; then
  1191. AC_MSG_CHECKING(whether CUDA and ICC are compatible)
  1192. AC_COMPILE_IFELSE(
  1193. AC_LANG_PROGRAM(
  1194. [[#include <cuda.h>]],
  1195. [[]]
  1196. ),
  1197. AC_MSG_RESULT(yes),
  1198. [ICC=""
  1199. AC_MSG_RESULT(no)]
  1200. )
  1201. fi
  1202. if test "x$ICC" != "x"; then
  1203. AC_DEFINE(STARPU_HAVE_ICC, [], [Define this if icc is available])
  1204. fi
  1205. AM_CONDITIONAL([STARPU_HAVE_ICC], [test "x$ICC" != "x"])
  1206. # File configuration
  1207. AC_CONFIG_COMMANDS([executable-scripts], [
  1208. chmod +x tests/regression/regression.sh
  1209. chmod +x gcc-plugin/tests/run-test
  1210. ])
  1211. AC_CONFIG_FILES(tests/regression/regression.sh tests/regression/profiles tests/regression/profiles.build.only)
  1212. AC_CONFIG_HEADER(src/common/config.h include/starpu_config.h gcc-plugin/src/starpu-gcc-config.h)
  1213. AC_OUTPUT([
  1214. Makefile
  1215. src/Makefile
  1216. tools/Makefile
  1217. socl/Makefile
  1218. socl/src/Makefile
  1219. libstarpu.pc
  1220. libstarpumpi.pc
  1221. examples/Makefile
  1222. examples/opt/Makefile
  1223. examples/starpufft/Makefile
  1224. examples/stencil/Makefile
  1225. examples/socl/Makefile
  1226. tests/Makefile
  1227. tests/opt/Makefile
  1228. doc/Makefile
  1229. mpi/Makefile
  1230. starpu-top/StarPU-Top.pro
  1231. gcc-plugin/Makefile
  1232. gcc-plugin/src/Makefile
  1233. gcc-plugin/tests/Makefile
  1234. gcc-plugin/tests/run-test
  1235. gcc-plugin/examples/Makefile
  1236. ])
  1237. AC_MSG_NOTICE([
  1238. CPUs enabled: $enable_cpu
  1239. CUDA enabled: $enable_cuda
  1240. OpenCL enabled: $enable_opencl
  1241. Cell enabled: $enable_gordon
  1242. GCC plug-in: $build_gcc_plugin
  1243. GCC plug-in test suite: $run_gcc_plugin_test_suite
  1244. Compile-time limits
  1245. (change these with --enable-maxcpus, --enable-maxcudadev,
  1246. --enable-maxopencldev, --enable-maxbuffers)
  1247. Maximum number of CPUs: $maxcpus
  1248. Maximum number of CUDA devices: $nmaxcudadev
  1249. Maximum number of OpenCL devices: $nmaxopencldev
  1250. Maximum number of memory nodes: $maxnodes
  1251. Maximum number of task buffers: $nmaxbuffers
  1252. GPU-GPU transfers: $have_cuda_memcpy_peer
  1253. Allocation cache: $enable_allocation_cache
  1254. MPI enabled: $use_mpi
  1255. SOCL enabled: $build_socl
  1256. Magma enabled: $have_magma
  1257. BLAS library: $blas_lib
  1258. hwloc: $have_valid_hwloc
  1259. FxT trace enabled: $use_fxt
  1260. StarPU-Top: $build_starpu_top
  1261. ])