starpu-max/tools/gdbinit

# StarPU --- Runtime system for heterogeneous multicore architectures.
#
# Copyright (C) 2010-2012  Université de Bordeaux 1
# Copyright (C) 2010, 2011  Centre National de la Recherche Scientifique
#
# StarPU is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or (at
# your option) any later version.
#
# StarPU is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
#
# See the GNU Lesser General Public License in COPYING.LGPL for more details.

define starpu-print-job
  set language c
  set $job = (struct _starpu_job *)$arg0

  printf "StarPU Job (%p)\n", $job
  printf "\ttask:\t\t\t\t<%p>\n", $job->task
  printf "\tsubmitted:\t\t\t<%d>\n", $job->submitted
  printf "\tterminated:\t\t\t<%d>\n", $job->terminated
  printf "\tjob_id:\t\t\t\t<%d>\n", $job->job_id
  if _starpu_use_fxt == 1 && $job->model_name
    printf "\tmodel_name:\t\t\t<%s>\n", $job->model_name
  end
end

document starpu-print-job
Prints a StarPU job
end

define starpu-print-task
  set language c
  set $task = (struct starpu_task *)$arg0
  set $job = (struct _starpu_job *)$task->starpu_private
  if $task->status == 0
    set $status="STARPU_TASK_INVALID"
  end
  if $task->status == 1
    set $status="STARPU_TASK_BLOCKED"
  end
  if $task->status == 2
    set $status="STARPU_TASK_READY"
  end
  if $task->status == 3
    set $status="STARPU_TASK_RUNNING"
  end
  if $task->status == 4
    set $status="STARPU_TASK_FINISHED"
  end
  if $task->status == 5
    set $status="STARPU_TASK_BLOCKED_ON_TAG"
  end
  if $task->status == 6
    set $status="STARPU_TASK_BLOCKED_ON_TASK"
  end
  if $task->status == 7
    set $status="STARPU_TASK_BLOCKED_ON_DATA"
  end

  printf "StarPU Task (%p)\n", $task
  printf "\tcodelet:\t\t\t<%p>\n", $task->cl
  printf "\tcallback:\t\t\t<%p>\n", $task->callback_func
  printf "\tsynchronous:\t\t\t<%d>\n", $task->synchronous
  printf "\texecute_on_a_specific_worker:\t<%d>\n", $task->execute_on_a_specific_worker
  printf "\tworkerid:\t\t\t<%d>\n", $task->workerid
  printf "\tdetach:\t\t\t\t<%d>\n", $task->detach
  printf "\tdestroy:\t\t\t<%d>\n", $task->destroy
  printf "\tregenerate:\t\t\t<%d>\n", $task->regenerate
  printf "\tstatus:\t\t\t\t<%s>\n", $status
  printf "\tjob:\t\t\t\t<%p>\n", $job
  printf "\tndeps:\t\t\t\t<%u>\n", $job->job_successors->ndeps
  printf "\tndeps_completed:\t\t<%u>\n", $job->job_successors->ndeps_completed
  printf "\tnsuccs:\t\t\t\t<%u>\n", $job->job_successors->nsuccs
  if $job
    starpu-print-job $job
  end
end

document starpu-print-task
Prints a StarPU task
end

define starpu-tasks-on-worker
  set language c
  set $worker=config->workers[$arg0]
  set $task=$worker->local_tasks->head
  while $task != 0x0
    starpu-print-task $task
    set $task=$task->next
  end
end

define starpu-tasks-on-workers
  set language c
  set $num=0
  while $num<config->topology->nworkers
    printf "Worker %s\n", config->workers[$num].name
    starpu-tasks-on-worker $num
    set $num = $num + 1
  end
end

define starpu-workers
  set language c
  set $num=0
  printf "[Id] Name       Arch Mask Devid Bindid Workerid Isrunning Isinitialized\n"
  while $num<config->topology->nworkers
    set $worker=&config->workers[$num]
    printf "[%2d] %-10s %-4d %-4d %-5d %-6d %-8d %-9d %-13d\n", $num, $worker->name, $worker->arch, $worker->worker_mask, \
          $worker->devid, $worker->bindid, $worker->workerid, $worker->worker_is_running, $worker->worker_is_initialized
    set $num = $num + 1
  end
end

document starpu-workers
Prints a list of the StarPU workers
end

define starpu-tags
  printf "tags htbl %p\n", tag_htbl
  printf "TODO\n"
end

define starpu-tasks
  printf "%d submitted tasks\n", nsubmitted
  printf "%d ready tasks\n", nready
  printf "Tasks being run:\n"
  set $n = 0
  while $n < config.topology.nworkers
    set $task = config.workers[$n].current_task
    if ($task)
      printf "worker %d: %p\n", $n, $task
    end
    set $n = $n + 1
  end
  if (tag_htbl)
    printf "TODO: tags\n"
  end
  print "TODO: complete\n"
end

define starpu
  printf "Here I am...\n"
end

define starpu-print-mode
  if ($arg0 & 1)
    printf "R"
  end
  if ($arg0 & 2)
    printf "W"
  end
  if ($arg0 & 4)
    printf " SCRATCH"
  end
  if ($arg0 & 8)
    printf " REDUX"
  end
end

define starpu-print-data
  set language c
  set $data = (starpu_data_handle_t) $arg0
  printf "Data handle %p\n", $data
  printf "Home node %d\n", $data->home_node
  printf "RWlock refs %d\n", $data->refcnt
  printf "Busy count %d\n", $data->busy_count
  printf "Current mode "
  starpu-print-mode $data->current_mode
  printf "\n"
  if $data->current_mode & (4|8)
    set $n = 0
    while $n < config.topology.nworkers
      set $replicate = $data->per_worker[$n]
      printf "Worker %2d %10s:", $n, config->workers[$n]->name
      if $replicate->state == 0
        printf " OWNER"
      end
      if $replicate->state == 1
        printf " SHARED"
      end
      if $replicate->state == 2
        printf " INVALID"
      end
      if $replicate->initialized
        printf " initialized"
      end
      printf "\n"
      set $n = $n + 1
    end
  else
    set $n = 0
    while $n < descr.nnodes
      set $replicate = &$data->per_node[$n]
      printf "Node %2d (%2d):", $n, $replicate->refcnt
      if $replicate->state == 0
        printf " OWNER"
      end
      if $replicate->state == 1
        printf " SHARED"
      end
      if $replicate->state == 2
        printf " INVALID"
      end
      if $replicate->initialized
        printf " initialized"
      end
      printf "\n"
      set $n = $n + 1
    end
  end
  printf "Post sync tasks\n"
  set $tasklist = $data->post_sync_tasks
  while $tasklist != 0x0
    starpu-print-task $tasklist->task
    set $tasklist = $tasklist->next
  end
  printf "Requester tasks\n"
  set $requesterlist = $data->req_list._head
  while $requesterlist != 0x0
    printf "mode: "
    starpu-print-mode $requesterlist->mode
    printf "\n"
    starpu-print-job $requesterlist->j
    set $requesterlist = $requesterlist->_next
  end
  if ($data->nchildren)
    printf "%d children\n", $data->nchildren
  end
end

define starpu-print-datas
  set $entry = registered_handles
  while $entry
    starpu-print-data $entry->handle
    printf "\n"
    set $entry = (struct handle_entry *) $entry.hh.next
  end
end

define starpu-print-request
  set $r = (struct _starpu_data_request *)$arg0
  printf "Request %p\n", $r
  printf "Refcnt %d\n", $r->refcnt
  printf "Handle %p\n", $r->handle
  printf "src_replicate %p\n", $r->src_replicate
  printf "dst_replicate %p\n", $r->dst_replicate
  printf "handling_node %d\n", $r->handling_node
  if ($r->mode & 1)
    printf "R"
  end
  if ($r->mode & 2)
    printf "W"
  end
  if ($r->mode & 4)
    printf "S"
  end
  if ($r->mode & 8)
    printf "X"
  end
  printf "\n"
  printf "completed: %d\n", $r->completed
  printf "retval: %d\n", $r->retval
  printf "ndeps: %d\n", $r->ndeps
  printf "next_req_count: %d\n", $r->next_req_count
end

define starpu-print-requests
  set $node = 0
  while $node < descr.nnodes
    printf "Node %u:\n", $node
    set $request = data_requests[$node]._head
    while $request != 0
      printf " Request %p: handle %p ", $request, $request->handle
      starpu-print-mode $request->mode
      printf "\n"
      set $request = $request->_next
    end
    set $node = $node + 1
  end
end

define starpu-print-prequests
  set $node = 0
  while $node < descr.nnodes
    printf "Node %u:\n", $node
    set $request = data_requests_pending[$node]._head
    while $request != 0
      printf " Request %p: handle %p ", $request, $request->handle
      starpu-print-mode $request->mode
      printf "\n"
      set $request = $request->_next
    end
    set $node = $node + 1
  end
end

define starpu-print-frequests
  set $node = 0
  while $node < descr.nnodes
    printf "Node %u:\n", $node
    set $request = prefetch_requests[$node]._head
    while $request != 0
      printf " Request %p: handle %p ", $request, $request->handle
      starpu-print-mode $request->mode
      printf "\n"
      set $request = $request->_next
    end
    set $node = $node + 1
  end
end

document starpu
List of StarPU-specific gdb functions:
starpu-workers          prints a list of the StarPU workers
starpu-tasks-on-workers prints a list of the tasks currently running on workers
starpu-tasks-on-worker  prints a list of the tasks running on the given worker
starpu-print-job        prints a StarPU job
starpu-print-task       prints a StarPU task
starpu-print-data       prints a StarPU data handle
starpu-print-datas      prints all StarPU data handles
starpu-print-request    prints a StarPU data request
starpu-print-requests   prints all StarPU data requests
starpu-print-prequests  prints all pending StarPU data requests
starpu-print-frequests  prints all StarPU prefetch data requests
starpu-tasks            prints a list of the tasks flowing in StarPU
starpu-tags             prints a list of the tags known to StarPU
end