starpu-max/doc/doxygen/chapters/440_fpga_support.doxy

/* StarPU --- Runtime system for heterogeneous multicore architectures.
 *
 * Copyright (C) 2019-2020  Université de Bordeaux, CNRS (LaBRI UMR 5800), Inria
 *
 * StarPU is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation; either version 2.1 of the License, or (at
 * your option) any later version.
 *
 * StarPU is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 *
 * See the GNU Lesser General Public License in COPYING.LGPL for more details.
 */

/*! \page FPGASupport FPGA Support

\section Introduction Introduction

Maxeler provides hardware and software solutions for accelerating
computing applications on dataflow engines (DFEs). DFEs are in-house
designed accelerators that encapsulate reconfigurable high-end FPGAs
at their core and are equipped with large amounts of DDR memory.

We extend the StarPU task programming library that initially targets
heterogeneous architectures to support Field Programmable Gate Array
(FPGA).

To create <c>StarPU/FPGA</c> applications exploiting DFE
configurations, MaxCompiler allows an application to be split into
three parts:

- <c>Kernel</c>, which implements the computational components of the
  application in hardware.
- <c>Manager configuration</c>, which connects Kernels to the CPU,
  engine RAM, other Kernels and other DFEs via MaxRing.
- <c>CPU application</c>, which interacts with the DFEs to read and
  write data to the Kernels and engine RAM.

The Simple Live CPU interface (SLiC) is Maxeler’s application
programming interface for seamless CPU-DFE integration. SLiC allows
CPU applications to configure and load a number of DFEs as well as to
subsequently schedule and run actions on those DFEs using simple
function calls. In StarPU/FPGA applications, we use <em>Dynamic SLiC
Interface</em> to exchange data streams between the CPU (Main Memory)
and DFE (Local Memory).

\section PortingApplicationsToFPGA Porting Applications to FPGA

The way to port an application to FPGA is to set the field
starpu_codelet::fpga_funcs, to provide StarPU with the function
for FPGA implementation, so for instance:

\verbatim
struct starpu_codelet cl =
{
    .fpga_funcs = {myfunc},
    .nbuffers = 1,
}
\endverbatim

\subsection FPGAExample StarPU/FPGA Application

To give you an idea of the interface that we used to exchange data
between <c>host</c> (CPU) and <c>FPGA</c> (DFE), here is an example,
based on one of the examples of Maxeler
(https://trac.version.fz-juelich.de/reconfigurable/wiki/Public).

<c>StreamFMAKernel.maxj</c> represents the Java kernel code; it
implements a very simple kernel (<c>c=a+b</c>), and <c>Test.c</c> starts it
from the <c>fpga_add</c> function; it first sets streaming up from the
CPU pointers, triggers execution and waits for the result. The API to
interact with DFEs is called <em>SLiC</em> which then also involves the
<c>MaxelerOS</c> runtime.

- <c>StreamFMAKernel.maxj</c>: the DFE part is described in the MaxJ
  programming language which is a Java-based metaprogramming approach.

\code{.java}
package tests;

import com.maxeler.maxcompiler.v2.kernelcompiler.Kernel;
import com.maxeler.maxcompiler.v2.kernelcompiler.KernelParameters;
import com.maxeler.maxcompiler.v2.kernelcompiler.types.base.DFEType;
import com.maxeler.maxcompiler.v2.kernelcompiler.types.base.DFEVar;

class StreamFMAKernel extends Kernel
{

   private static final DFEType type = dfeInt(32);

   protected StreamFMAKernel(KernelParameters parameters)
   {
             super(parameters);

	     DFEVar a = io.input("a", type);
	     DFEVar b = io.input("b", type);
	     DFEVar c;

	     c = a+b;

	     io.output("output", c, type);
   }
}
\endcode

- <c>StreamFMAManager.maxj</c>: is also described in the MaxJ
  programming language and orchestrates data movement between the host
  and the DFE.

\code{.java}
package tests;

import com.maxeler.maxcompiler.v2.build.EngineParameters;
import com.maxeler.maxcompiler.v2.managers.custom.blocks.KernelBlock;
import com.maxeler.platform.max5.manager.Max5LimaManager;

class StreamFMAManager extends Max5LimaManager
{
	private static final String kernel_name = "StreamFMAKernel";

	public StreamFMAManager(EngineParameters arg0)
	{
		super(arg0);
		KernelBlock kernel = addKernel(new StreamFMAKernel(makeKernelParameters(kernel_name)));
		kernel.getInput("a") <== addStreamFromCPU("a");
		kernel.getInput("b") <== addStreamFromCPU("b");
		addStreamToCPU("output") <== kernel.getOutput("output");
	}

	public static void main(String[] args)
	{
		StreamFMAManager manager = new StreamFMAManager(new EngineParameters(args));
		manager.build();
	}
}
\endcode

Once <c>StreamFMAKernel.maxj</c> and <c>StreamFMAManager.maxj</c> are
written, there are other steps to do:

- Building the JAVA program: (for Kernel and Manager (.maxj))
\verbatim
$ maxjc -1.7 -cp $MAXCLASSPATH streamfma/
\endverbatim

- Running the Java program to generate a DFE implementation (a .max
  file) that can be called from a StarPU/FPGA application and slic
  headers (.h) for simulation:

\verbatim
$ java -XX:+UseSerialGC -Xmx2048m -cp $MAXCLASSPATH:. streamfma.StreamFMAManager DFEModel=MAIA maxFileName=StreamFMA target=DFE_SIM
\endverbatim

- Build the slic object file (simulation):

\verbatim
$ sliccompile StreamFMA.max
\endverbatim

- <c>Test.c </c>:

to interface StarPU task-based runtime system with Maxeler's DFE
devices, we use the advanced dynamic interface of <em>SLiC</em> in
<b>non_blocking</b> mode.

Test code must include <c>MaxSLiCInterface.h</c> and <c>MaxFile.h</c>.
The .max file contains the bitstream. The StarPU/FPGA application can
be written in C, C++, etc.

\code{.c}
#include "StreamFMA.h"
#include "MaxSLiCInterface.h"

void fpga_add(void *buffers[], void *cl_arg)
{
    (void)cl_arg;

    int *a = (int*) STARPU_VECTOR_GET_PTR(buffers[0]);
    int *b = (int*) STARPU_VECTOR_GET_PTR(buffers[1]);
    int *c = (int*) STARPU_VECTOR_GET_PTR(buffers[2]);

    int size = STARPU_VECTOR_GET_NX(buffers[0]);

    /* actions to run on an engine */
    max_actions_t *act = max_actions_init(maxfile, NULL);

    /* set the number of ticks for a kernel */
    max_set_ticks  (act, "StreamFMAKernel", size);

    /* send input streams */
    max_queue_input(act, "a", a, size *sizeof(a[0]));
    max_queue_input(act, "b", b, size*sizeof(b[0]));

    /* store output stream */
    max_queue_output(act,"output", c, size*sizeof(c[0]));

    /* run actions on the engine */
     printf("**** Run actions in non blocking mode **** \n");

    /* run actions in non_blocking mode */
    max_run_t *run0= max_run_nonblock(engine, act);

    printf("*** wait for the actions on DFE to complete *** \n");
    max_wait(run0);
  }

  static struct starpu_codelet cl =
  {
    .cpu_funcs = {cpu_func},
    .cpu_funcs_name = {"cpu_func"},
    .fpga_funcs = {fpga_add},
    .nbuffers = 3,
    .modes = {STARPU_R, STARPU_R, STARPU_W}
  };

int main(int argc, char **argv)
{
    ...

    /* Implementation of a maxfile */
    max_file_t *maxfile = StreamFMA_init();

    /* Implementation of an engine */
    max_engine_t *engine = max_load(maxfile, "*");

    starpu_init(NULL);

    ... Task submission etc. ...

    starpu_shutdown();

    /* deallocate the set of actions */
    max_actions_free(act);

    /* unload and deallocate an engine obtained by way of max_load */
    max_unload(engine);

    return 0;
}
\endcode

To write the StarPU/FPGA application: first, the programmer must
describe the codelet using StarPU’s C API. This codelet provides both
a CPU implementation and an FPGA one. It also specifies that the task
has two inputs and one output through the starpu_codelet::nbuffers and
starpu_codelet::modes attributes.

<c>fpga_add</c> function is the name of the FPGA implementation and is
mainly divided in four steps:

- Init actions to be run on DFE.
- Add data to an input stream for an action.
- Add data storage space for an output stream.
- Run actions on DFE in <b>non_blocking</b> mode; a non-blocking call
  returns immediately, allowing the calling code to do more CPU work
  in parallel while the actions are run.
- Wait for the actions to complete.

In the <c>main</c> function, there are four important steps:

- Implement a maxfile.
- Load a DFE.
- Free actions.
- Unload and deallocate the DFE.

The rest of the application (data registration, task submission, etc.)
is as usual with StarPU.

Complete examples are available in <c>tests/fpga/*.c</c>

\subsection FPGADataTransfers Data Transfers in StarPU/FPGA Applications

The communication between the host and the DFE is done through the
<em>Dynamic advance interface</em> to exchange data between the main
memory and the local memory of the DFE.

For the moment, we use \ref STARPU_MAIN_RAM to send and store data
to/from DFE's local memory. However, we aim to use a multiplexer to
choose which memory node we will use to read/write data. So, the user
can tell that the computational kernel will take data from the main
memory or DFE's local memory for example.

In StarPU applications, when \ref starpu_codelet::specific_nodes is
set to 1, this specifies the memory nodes where each data should be
sent to for task execution.

\subsection FPGAConfiguration FPGA Configuration

To configure StarPU with FPGA accelerators, we can enable <c>FPGA</c>
through the \c configure option \ref with-fpga "--with-fpga".

Compiling and installing StarPU/FPGA application is done following the
standard procedure:

\verbatim
$ make
$ make install
\endverbatim

\subsection FPGALaunchingprograms  Launching Programs: Simulation

Maxeler provides a simple tutorial to use MaxCompiler
(https://trac.version.fz-juelich.de/reconfigurable/wiki/Public).
Running the Java program to generate maxfile and slic headers
(hardware) on Maxeler's DFE device, takes a VERY long time, approx. 2
hours even for this very small example. That's why we use the
simulation.

- To start the simulation on Maxeler's DFE device:
\verbatim
$ maxcompilersim -c LIMA -n StreamFMA restart
\endverbatim

- To run the binary (simulation)
\verbatim
$ export LD_LIBRARY_PATH=$MAXELEROSDIR/lib:$LD_LIBRARY_PATH
$ export SLIC_CONF="use_simulation=StreamFMA"
\endverbatim

- To force tasks to be scheduled on the FPGA, one can disable the use of CPU
cores by setting the \ref STARPU_NCPU environment variable to 0.
\verbatim
$ STARPU_NCPU=0 ./StreamFMA
\endverbatim

- To stop the simulation
\verbatim
$ maxcompilersim -c LIMA -n StreamFMA stop
\endverbatim


*/