configure.ac 49 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460
  1. # StarPU --- Runtime system for heterogeneous multicore architectures.
  2. #
  3. # Copyright (C) 2009, 2010, 2011 Université de Bordeaux 1
  4. # Copyright (C) 2010, 2011 Centre National de la Recherche Scientifique
  5. # Copyright (C) 2011 Télécom-SudParis
  6. #
  7. # StarPU is free software; you can redistribute it and/or modify
  8. # it under the terms of the GNU Lesser General Public License as published by
  9. # the Free Software Foundation; either version 2.1 of the License, or (at
  10. # your option) any later version.
  11. #
  12. # StarPU is distributed in the hope that it will be useful, but
  13. # WITHOUT ANY WARRANTY; without even the implied warranty of
  14. # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  15. #
  16. # See the GNU Lesser General Public License in COPYING.LGPL for more details.
  17. AC_INIT([StarPU],1.0.0, [starpu-devel@lists.gforge.inria.fr], starpu)
  18. AC_CONFIG_SRCDIR(include/starpu.h)
  19. AC_CONFIG_AUX_DIR([build-aux])
  20. AC_CANONICAL_SYSTEM
  21. dnl Automake 1.11 introduced `silent-rules' and `color-tests'. Use them
  22. dnl when they're available.
  23. m4_ifdef([AM_SILENT_RULES],
  24. [AM_INIT_AUTOMAKE([1.11 -Wall -Werror foreign silent-rules color-tests])],
  25. [AM_INIT_AUTOMAKE([1.10 -Wall -Werror foreign])])
  26. AC_PREREQ(2.60)
  27. AC_PROG_CC
  28. AC_PROG_CPP
  29. AC_PROG_SED
  30. AC_PROG_LN_S
  31. AC_PROG_F77
  32. AC_CHECK_PROGS([ICC], [icc])
  33. if test "x$ICC" != "x"; then
  34. AC_DEFINE(STARPU_HAVE_ICC, [], [Define this if icc is available])
  35. fi
  36. AM_CONDITIONAL([STARPU_HAVE_ICC], [test "x$ICC" != "x"])
  37. LT_PREREQ([2.2])
  38. LT_INIT([win32-dll])
  39. AC_PROG_INSTALL
  40. AC_PROG_MKDIR_P
  41. AC_PROG_LN_S
  42. AC_HEADER_STDC
  43. AC_C_RESTRICT
  44. AC_PATH_PROGS([STARPU_MS_LIB], [lib])
  45. AC_ARG_VAR([STARPU_MS_LIB], [Path to Microsoft's Visual Studio `lib' tool])
  46. AM_CONDITIONAL([STARPU_HAVE_MS_LIB], [test "x$STARPU_MS_LIB" != "x"])
  47. case "$target" in
  48. *-*-mingw*|*-*-cygwin*)
  49. starpu_windows=yes
  50. libext=a
  51. AC_DEFINE(STARPU_HAVE_WINDOWS, [], [Define this on windows.])
  52. ;;
  53. esac
  54. AM_CONDITIONAL([STARPU_HAVE_WINDOWS], [test "x$starpu_windows" = "xyes"])
  55. # on Darwin, GCC targets i386 by default, so we don't have atomic ops
  56. AC_CHECK_SIZEOF([void *])
  57. SIZEOF_VOID_P=$ac_cv_sizeof_void_p
  58. if test x$SIZEOF_VOID_P = x4; then
  59. case "$target" in
  60. i386-*darwin*) CFLAGS+=" -march=i686 " ;;
  61. esac
  62. fi
  63. # This will be useful for program which use CUDA (and .cubin files) which need
  64. # some path to the CUDA code at runtime.
  65. AC_DEFINE_UNQUOTED(STARPU_BUILD_DIR, "$PWD", [location of StarPU build directory])
  66. AC_SUBST(STARPU_BUILD_DIR, $PWD)
  67. case "${srcdir}" in
  68. /*) AC_DEFINE_UNQUOTED(STARPU_SRC_DIR, "$(eval echo ${srcdir})", [location of StarPU sources])
  69. AC_SUBST(STARPU_SRC_DIR, "$(eval echo ${srcdir})") ;;
  70. *) AC_DEFINE_UNQUOTED(STARPU_SRC_DIR, "$(eval echo $PWD/${srcdir})", [location of StarPU sources])
  71. AC_SUBST(STARPU_SRC_DIR, "$(eval echo $PWD/${srcdir})") ;;
  72. esac
  73. AC_CHECK_LIB([pthread], [pthread_create])
  74. AC_COMPILE_IFELSE(
  75. AC_LANG_PROGRAM([[
  76. #include <pthread.h>
  77. ]], [[ pthread_t t; pthread_create(&t, NULL, NULL, NULL); ]]),,
  78. AC_MSG_ERROR([pthread_create unavailable]))
  79. AC_SEARCH_LIBS([sqrt],[m],,AC_MSG_ERROR([math library unavailable]))
  80. AC_HAVE_LIBRARY([ws2_32])
  81. AC_CHECK_FUNCS([sysconf])
  82. AC_CHECK_FUNC([pthread_spin_lock], have_pthread_spin_lock=yes, have_pthread_spin_lock=no)
  83. if test x$have_pthread_spin_lock = xyes; then
  84. AC_DEFINE(HAVE_PTHREAD_SPIN_LOCK,[],[pthread_spin_lock is available])
  85. fi
  86. # yes, that's non portable, but it's still better than sched_setaffinity
  87. AC_CHECK_FUNCS(pthread_setaffinity_np)
  88. # There is no posix_memalign on Mac OS X, only memalign
  89. AC_CHECK_FUNCS([posix_memalign], [AC_DEFINE([STARPU_HAVE_POSIX_MEMALIGN], [1], [Define to 1 if you have the `posix_memalign' function.])])
  90. AC_CHECK_FUNCS([memalign], [AC_DEFINE([STARPU_HAVE_MEMALIGN], [1], [Define to 1 if you have the `memalign' function.])])
  91. # Some systems don't have drand48
  92. AC_CHECK_FUNC([drand48], have_drand48=yes, have_drand48=no)
  93. # Maybe the user still does not want to use the provided drand48
  94. AC_ARG_ENABLE(default-drand48, [AS_HELP_STRING([--disable-default-drand48],
  95. [Do not use the default version of drand48])],
  96. enable_default_drand48=$enableval, enable_default_drand48=yes)
  97. if test x$have_drand48 = xyes -a x$enable_default_drand48 = xyes ; then
  98. AC_DEFINE([starpu_srand48(seed)],[srand48(seed)],[srand48 equivalent function])
  99. AC_DEFINE([starpu_drand48()],[drand48()],[drand48 equivalent function])
  100. AC_DEFINE([starpu_erand48(xsubi)],[erand48(xsubi)],[erand48 equivalent function])
  101. AC_DEFINE([starpu_srand48_r(seed, buffer)],[srand48_r(seed, buffer)],[srand48_r equivalent function])
  102. AC_DEFINE([starpu_erand48_r(xsubi, buffer, result)],[erand48_r(xsubi, buffer, result)],[erand48_r equivalent function])
  103. else
  104. AC_DEFINE([starpu_srand48(seed)],[srand(seed)],[srand48 equivalent function])
  105. AC_DEFINE([starpu_drand48()],[((double)(rand()) / RAND_MAX)],[drand48 equivalent function])
  106. AC_DEFINE([starpu_erand48(xsubi)],[starpu_drand48()],[erand48 equivalent function])
  107. AC_DEFINE([starpu_srand48_r(seed, buffer)],[srand((unsigned int)seed)],[srand48_r equivalent function])
  108. AC_DEFINE([starpu_erand48_r(xsubi, buffer, result)],[do {*(result) = ((double)(rand()) / RAND_MAX);} while (0);],[erand48_r equivalent function])
  109. fi
  110. # Define slow machine
  111. AC_ARG_ENABLE(slow-machine, [AS_HELP_STRING([--enable-slow-machine],
  112. [Lower default values for the testcases run by make check])],
  113. enable_slow_machine=$enableval, enable_slow_machine=false)
  114. if test x$enable_slow_machine = xyes; then
  115. AC_DEFINE(STARPU_SLOW_MACHINE, [1], [enable slow machine])
  116. fi
  117. AC_CHECK_HEADERS([malloc.h], [AC_DEFINE([STARPU_HAVE_MALLOC_H], [1], [Define to 1 if you have the <malloc.h> header file.])])
  118. # This defines HAVE_SYNC_VAL_COMPARE_AND_SWAP
  119. STARPU_CHECK_SYNC_VAL_COMPARE_AND_SWAP
  120. # This defines HAVE_SYNC_BOOL_COMPARE_AND_SWAP
  121. STARPU_CHECK_SYNC_BOOL_COMPARE_AND_SWAP
  122. # This defines HAVE_SYNC_FETCH_AND_ADD
  123. STARPU_CHECK_SYNC_FETCH_AND_ADD
  124. # This defines HAVE_SYNC_FETCH_AND_OR
  125. STARPU_CHECK_SYNC_FETCH_AND_OR
  126. # This defines HAVE_SYNC_LOCK_TEST_AND_SET
  127. STARPU_CHECK_SYNC_LOCK_TEST_AND_SET
  128. # This defines HAVE_SYNC_SYNCHRONIZE
  129. STARPU_CHECK_SYNC_SYNCHRONIZE
  130. CPPFLAGS="${CPPFLAGS} -D_GNU_SOURCE "
  131. STARPU_SEARCH_LIBS([LIBNUMA],[set_mempolicy],[numa],[enable_libnuma=yes],[enable_libnuma=no])
  132. AC_MSG_CHECKING(whether libnuma is available)
  133. AC_MSG_RESULT($enable_libnuma)
  134. if test x$enable_libnuma = xyes; then
  135. AC_DEFINE(STARPU_HAVE_LIBNUMA,[],[libnuma is available])
  136. fi
  137. ###############################################################################
  138. # #
  139. # CPUs settings #
  140. # #
  141. ###############################################################################
  142. AC_MSG_CHECKING(maximum number of CPUs)
  143. AC_ARG_ENABLE(maxcpus, [AS_HELP_STRING([--enable-maxcpus=<number>],
  144. [maximum number of CPUs])],
  145. maxcpus=$enableval, maxcpus=16)
  146. AC_MSG_RESULT($maxcpus)
  147. AC_DEFINE_UNQUOTED(STARPU_MAXCPUS, [$maxcpus], [Maximum number of CPUs supported])
  148. AC_MSG_CHECKING(whether CPUs should be used)
  149. AC_ARG_ENABLE(cpu, [AS_HELP_STRING([--disable-cpu],
  150. [do not use the CPU(s)])],
  151. enable_cpu=$enableval, enable_cpu=yes)
  152. AC_MSG_RESULT($enable_cpu)
  153. AC_SUBST(STARPU_USE_CPU, $enable_cpu)
  154. AM_CONDITIONAL(STARPU_USE_CPU, test x$enable_cpu = xyes)
  155. if test x$enable_cpu = xyes; then
  156. AC_DEFINE(STARPU_USE_CPU, [1], [CPU driver is activated])
  157. fi
  158. # How many parallel worker can we support ?
  159. nmaxcombinedworkers=`expr 2 \* $maxcpus`
  160. AC_DEFINE_UNQUOTED(STARPU_NMAX_COMBINEDWORKERS,
  161. [$nmaxcombinedworkers], [Maximum number of worker combinations])
  162. ###############################################################################
  163. # #
  164. # CUDA settings #
  165. # #
  166. ###############################################################################
  167. AC_MSG_CHECKING(maximum number of CUDA devices)
  168. AC_ARG_ENABLE(maxcudadev, [AS_HELP_STRING([--enable-maxcudadev=<number>],
  169. [maximum number of CUDA devices])],
  170. nmaxcudadev=$enableval, nmaxcudadev=4)
  171. AC_MSG_RESULT($nmaxcudadev)
  172. AC_DEFINE_UNQUOTED(STARPU_MAXCUDADEVS, [$nmaxcudadev],
  173. [maximum number of CUDA devices])
  174. AC_ARG_ENABLE(cuda, [AS_HELP_STRING([--disable-cuda],
  175. [do not use CUDA device(s)])],, [enable_cuda=maybe])
  176. #AC_MSG_CHECKING(whether CUDA is available)
  177. AC_ARG_WITH(cuda-dir,
  178. [AS_HELP_STRING([--with-cuda-dir=<path>],
  179. [specify CUDA installation directory])],
  180. [
  181. cuda_dir="$withval"
  182. # in case this was not explicit yet
  183. enable_cuda=yes
  184. ], cuda_dir=no)
  185. AC_ARG_WITH(cuda-include-dir,
  186. [AS_HELP_STRING([--with-cuda-include-dir=<path>],
  187. [specify where CUDA headers are installed])],
  188. [
  189. cuda_include_dir="$withval"
  190. # in case this was not explicit yet
  191. enable_cuda=yes
  192. ], [cuda_include_dir=no])
  193. AC_ARG_WITH(cuda-lib-dir,
  194. [AS_HELP_STRING([--with-cuda-lib-dir=<path>],
  195. [specify where CUDA libraries are installed])],
  196. [
  197. cuda_lib_dir="$withval"
  198. # in case this was not explicit yet
  199. enable_cuda=yes
  200. ], [cuda_lib_dir=no])
  201. AC_DEFUN([STARPU_CHECK_CUDA],
  202. [
  203. __cuda_dir=$1
  204. __cuda_lib_dir=$2
  205. if test "$__cuda_dir" != "no" ; then
  206. AC_MSG_CHECKING(whether CUDA is available in $__cuda_dir)
  207. else
  208. AC_MSG_CHECKING(whether CUDA is available)
  209. fi
  210. AC_MSG_RESULT()
  211. if test "$__cuda_lib_dir" = "no" -a "$__cuda_dir" != "no" ; then
  212. __cuda_lib_dir="$__cuda_dir/lib"
  213. fi
  214. SAVED_LDFLAGS="${LDFLAGS}"
  215. if test "$__cuda_dir" != "no" ; then
  216. STARPU_CUDA_LDFLAGS="-L${__cuda_lib_dir}"
  217. LDFLAGS="${SAVED_LDFLAGS} -L${__cuda_lib_dir}"
  218. fi
  219. AC_HAVE_LIBRARY([cuda],[have_valid_cuda=yes],[have_valid_cuda=no])
  220. unset ac_cv_lib_cuda_main
  221. if test "$have_valid_cuda" = "no" ; then
  222. if test "$__cuda_dir" != "no" ; then
  223. STARPU_CUDA_LDFLAGS="-L${__cuda_dir}/lib64"
  224. LDFLAGS="${SAVED_LDFLAGS} -L${__cuda_dir}/lib64"
  225. AC_HAVE_LIBRARY([cuda],[have_valid_cuda=yes],[have_valid_cuda=no])
  226. unset ac_cv_lib_cuda_main
  227. fi
  228. fi
  229. if test "$have_valid_cuda" = "no" ; then
  230. LDFLAGS="${SAVED_LDFLAGS}"
  231. unset STARPU_CUDA_LDFLAGS
  232. fi
  233. ])
  234. AC_DEFUN([STARPU_CHECK_CUDA_RUNTIME],
  235. [
  236. __cuda_dir=$1
  237. __cuda_include_dir=$2
  238. __cuda_lib_dir=$3
  239. if test "$__cuda_dir" != "no" ; then
  240. AC_MSG_CHECKING(whether CUDA RT is available in $__cuda_dir)
  241. else
  242. AC_MSG_CHECKING(whether CUDA RT is available)
  243. fi
  244. AC_MSG_RESULT()
  245. if test "$__cuda_include_dir" = "no" -a "$__cuda_dir" != "no" ; then
  246. __cuda_include_dir="$__cuda_dir/include"
  247. fi
  248. if test "$__cuda_lib_dir" = "no" -a "$__cuda_dir" != "no" ; then
  249. __cuda_lib_dir="$__cuda_dir/lib"
  250. fi
  251. SAVED_CPPFLAGS="$CPPFLAGS"
  252. SAVED_LDFLAGS="${LDFLAGS}"
  253. SAVED_STARPU_CUDA_LDFLAGS=${STARPU_CUDA_LDFLAGS}
  254. if test "$__cuda_lib_dir" != "no" ; then
  255. STARPU_CUDA_LDFLAGS="${SAVED_STARPU_CUDA_LDFLAGS} -L$__cuda_lib_dir"
  256. fi
  257. if test "$__cuda_include_dir" != "no" ; then
  258. CPPFLAGS="${CPPFLAGS} -I$__cuda_include_dir"
  259. fi
  260. AC_CHECK_HEADER([cuda.h],[have_valid_cuda=yes],[have_valid_cuda=no])
  261. unset ac_cv_header_cuda_h
  262. if test "$have_valid_cuda" = "yes" ; then
  263. if test "$__cuda_lib_dir" != "no"; then
  264. LDFLAGS="${SAVED_LDFLAGS} -L$__cuda_lib_dir"
  265. fi
  266. AC_HAVE_LIBRARY([cudart],[have_valid_cuda=yes],[have_valid_cuda=no])
  267. unset ac_cv_lib_cudart_main
  268. if test "$have_valid_cuda" = "no" ; then
  269. if test "$3" = "no" -a "$__cuda_dir" != "no" ; then
  270. __cuda_lib_dir="$__cuda_dir/lib64"
  271. LDFLAGS="${SAVED_LDFLAGS} -L$__cuda_lib_dir"
  272. STARPU_CUDA_LDFLAGS="${SAVED_STARPU_CUDA_LDFLAGS} -L$__cuda_lib_dir"
  273. AC_HAVE_LIBRARY([cudart],[have_valid_cuda=yes],[have_valid_cuda=no])
  274. unset ac_cv_lib_cudart_main
  275. fi
  276. fi
  277. fi
  278. if test "$have_valid_cuda" = "yes" ; then
  279. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lcudart"
  280. LDFLAGS="${SAVED_LDFLAGS} ${STARPU_CUDA_LDFLAGS}"
  281. # we also check that CUBLAS is available
  282. AC_HAVE_LIBRARY([cublas],[have_valid_cuda=yes],[have_valid_cuda=no])
  283. unset ac_cv_lib_cublas_main
  284. if test "$have_valid_cuda" = "yes" ; then
  285. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lcublas"
  286. fi
  287. fi
  288. CPPFLAGS="${SAVED_CPPFLAGS}"
  289. LDFLAGS="${SAVED_LDFLAGS}"
  290. if test "$have_valid_cuda" = "yes" -a "$__cuda_include_dir" != "no"; then
  291. STARPU_CUDA_CPPFLAGS="-I$__cuda_include_dir"
  292. NVCCFLAGS="${NVCCFLAGS} -I$__cuda_include_dir"
  293. fi
  294. ])
  295. if test x$enable_cuda = xyes -o x$enable_cuda = xmaybe; then
  296. STARPU_CHECK_CUDA($cuda_dir, $cuda_lib_dir)
  297. if test "$have_valid_cuda" = "no" ; then
  298. for f in "/usr/local/cuda" "/c/cuda" "/cygdrive/c/cuda" "/opt/cuda" "$CUDA_INC_PATH" "$CUDA_INSTALL_PATH"; do
  299. STARPU_CHECK_CUDA($f, "no")
  300. if test "$have_valid_cuda" = "yes" ; then
  301. break
  302. fi
  303. done
  304. fi
  305. if test "$have_valid_cuda" = "yes" ; then
  306. STARPU_CHECK_CUDA_RUNTIME($cuda_dir, $cuda_include_dir, $cuda_lib_dir)
  307. if test "$have_valid_cuda" = "no" ; then
  308. for f in "/usr/local/cuda" "/c/cuda" "/cygdrive/c/cuda" "/opt/cuda" "$CUDA_INC_PATH" "$CUDA_INSTALL_PATH"; do
  309. STARPU_CHECK_CUDA_RUNTIME($f, "no", "no")
  310. if test "$have_valid_cuda" = "yes" ; then
  311. break
  312. fi
  313. done
  314. fi
  315. fi
  316. # in case CUDA was explicitely required, but is not available, this is an error
  317. if test x$enable_cuda = xyes -a x$have_valid_cuda = no; then
  318. AC_MSG_ERROR([cannot find CUDA])
  319. fi
  320. # now we enable CUDA if and only if a proper setup is available
  321. enable_cuda=$have_valid_cuda
  322. fi
  323. if test x$enable_cuda = xyes; then
  324. AC_PATH_PROG([NVCC], [nvcc], [not-found],
  325. [$cuda_dir/bin:$PATH:/usr/local/cuda/bin:/usr/bin:/bin])
  326. if test "x$NVCC" = "xnot-found"; then
  327. AC_MSG_WARN(['nvcc' not found, disabling CUDA])
  328. enable_cuda=no
  329. fi
  330. fi
  331. AC_MSG_CHECKING(whether CUDA should be used)
  332. AC_MSG_RESULT($enable_cuda)
  333. AC_SUBST(STARPU_USE_CUDA, $enable_cuda)
  334. AM_CONDITIONAL(STARPU_USE_CUDA, test x$enable_cuda = xyes)
  335. if test x$enable_cuda = xyes; then
  336. AC_DEFINE(STARPU_USE_CUDA, [1], [CUDA support is activated])
  337. # On Darwin, the libstdc++ dependency is not automatically added by nvcc
  338. # case "$target" in
  339. # *-*darwin*) AC_HAVE_LIBRARY([stdc++], []) ;;
  340. # #*-*darwin*) AC_HAVE_LIBRARY([stdc++], [STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lstdc++"]) ;;
  341. # esac
  342. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lcuda"
  343. STARPU_CUFFT_LDFLAGS="-lcufft"
  344. if test "$F77" = "gfortran" ; then
  345. STARPU_CUDA_FORTRAN_LDFLAGS="-lgfortran"
  346. AC_SUBST(STARPU_CUDA_FORTRAN_LDFLAGS)
  347. fi
  348. #in case this is a 64bit setup, we tell nvcc to use a -m64 flag
  349. if test x$SIZEOF_VOID_P = x8; then
  350. NVCCFLAGS="${NVCCFLAGS} -m64"
  351. AC_SUBST(NVCCFLAGS)
  352. fi
  353. fi
  354. have_magma=no
  355. if test x$enable_cuda = xyes; then
  356. PKG_CHECK_MODULES([MAGMA], [magma], [
  357. AC_DEFINE([STARPU_HAVE_MAGMA], [1], [Define to 1 if you have the MAGMA library.])
  358. AC_SUBST([STARPU_HAVE_MAGMA], [1])
  359. have_magma=yes
  360. ], [:])
  361. fi
  362. AM_CONDITIONAL(STARPU_HAVE_MAGMA, [test x$have_magma = xyes])
  363. AC_MSG_CHECKING(whether MAGMA should be used)
  364. AC_MSG_RESULT($have_magma)
  365. # cufftDoubleComplex may not be available on an old CUDA setup
  366. AC_CHECK_TYPE(cufftDoubleComplex,
  367. [have_cufftdoublecomplex=yes],
  368. [have_cufftdoublecomplex=no], [#include <cufft.h>])
  369. AM_CONDITIONAL(STARPU_HAVE_CUFFTDOUBLECOMPLEX, test x$have_cufftdoublecomplex = xyes)
  370. if test x$have_cufftdoublecomplex = xyes; then
  371. AC_DEFINE(STARPU_HAVE_CUFFTDOUBLECOMPLEX, [1], [cufftDoubleComplex is available])
  372. fi
  373. # The CURAND library is only available since CUDA 3.2
  374. have_curand=$enable_cuda
  375. if test x$enable_cuda = xyes; then
  376. SAVED_LDFLAGS="${LDFLAGS}"
  377. LDFLAGS="${LDFLAGS} ${STARPU_CUDA_LDFLAGS}"
  378. AC_HAVE_LIBRARY([curand],[have_curand=yes],[have_curand=no])
  379. LDFLAGS="${SAVED_LDFLAGS}"
  380. fi
  381. AC_MSG_CHECKING(whether CURAND is available)
  382. AC_MSG_RESULT($have_curand)
  383. if test x$have_curand = xyes; then
  384. AC_DEFINE(STARPU_HAVE_CURAND,[1], [CURAND is available])
  385. STARPU_CURAND_LDFLAGS="$STARPU_CURAND_LDFLAGS -lcurand"
  386. AC_SUBST(STARPU_CURAND_LDFLAGS)
  387. fi
  388. # Peer transfers are only supported since CUDA 4.0
  389. # Disable them if user explicity wants to disable them
  390. AC_ARG_ENABLE(cuda_memcpy_peer, [AS_HELP_STRING([--disable-cuda-memcpy-peer], [do not allow peer transfers when using CUDA 4.0])],, [enable_cuda_memcpy_peer=yes])
  391. have_cuda_memcpy_peer=no
  392. if test x$enable_cuda_memcpy_peer = xyes -a x$enable_cuda = xyes ; then
  393. SAVED_LDFLAGS="${LDFLAGS}"
  394. LDFLAGS="${LDFLAGS} ${STARPU_CUDA_LDFLAGS}"
  395. AC_CHECK_FUNC([cudaMemcpyPeer], have_cuda_memcpy_peer=yes, have_cuda_memcpy_peer=no)
  396. LDFLAGS="${SAVED_LDFLAGS}"
  397. fi
  398. if test x$have_cuda_memcpy_peer = xyes; then
  399. AC_DEFINE(HAVE_CUDA_MEMCPY_PEER,[],[Peer transfers are supported in CUDA])
  400. fi
  401. if test x$enable_cuda = xyes; then
  402. if test x$starpu_windows != xyes ; then
  403. STARPU_CUDA_LDFLAGS="$STARPU_CUDA_LDFLAGS -lstdc++"
  404. fi
  405. AC_SUBST(STARPU_CUDA_LDFLAGS)
  406. AC_SUBST(STARPU_CUFFT_LDFLAGS)
  407. AC_SUBST(STARPU_CUDA_CPPFLAGS)
  408. fi
  409. ###############################################################################
  410. # #
  411. # OpenCL settings #
  412. # #
  413. ###############################################################################
  414. AC_MSG_CHECKING(maximum number of OpenCL devices)
  415. AC_ARG_ENABLE(maxopencldev, [AS_HELP_STRING([--enable-maxopencldev=<number>],
  416. [maximum number of OPENCL devices])],
  417. nmaxopencldev=$enableval, nmaxopencldev=8)
  418. AC_MSG_RESULT($nmaxopencldev)
  419. AC_DEFINE_UNQUOTED(STARPU_MAXOPENCLDEVS, [$nmaxopencldev],
  420. [maximum number of OPENCL devices])
  421. AC_ARG_ENABLE(opencl, [AS_HELP_STRING([--disable-opencl],
  422. [do not use OpenCL device(s)])],, [enable_opencl=maybe])
  423. AC_DEFUN([STARPU_CHECK_OPENCL],
  424. [
  425. __opencl_dir=$1
  426. __opencl_include_dir=$2
  427. __opencl_lib_dir=$3
  428. if test "$__opencl_dir" != "no" ; then
  429. AC_MSG_CHECKING(whether OpenCL is available in $__opencl_dir)
  430. else
  431. AC_MSG_CHECKING(whether OpenCL is available)
  432. fi
  433. AC_MSG_RESULT()
  434. if test "$__opencl_include_dir" = "no" -a "$__opencl_dir" != "no" ; then
  435. __opencl_include_dir="$__opencl_dir/include"
  436. fi
  437. if test "$__opencl_lib_dir" = "no" -a "$__opencl_dir" != "no" ; then
  438. __opencl_lib_dir="$__opencl_dir/lib"
  439. fi
  440. SAVED_CPPFLAGS="$CPPFLAGS"
  441. SAVED_LDFLAGS="${LDFLAGS}"
  442. if test "$__opencl_include_dir" != "no" ; then
  443. CPPFLAGS="${CPPFLAGS} -I$__opencl_include_dir"
  444. fi
  445. AC_CHECK_HEADER([CL/cl.h],[have_valid_opencl=yes],[have_valid_opencl=no])
  446. unset ac_cv_header_CL_cl_h
  447. if test "$have_valid_opencl" = "yes" ; then
  448. if test "$__opencl_lib_dir" != "no"; then
  449. LDFLAGS="${SAVED_LDFLAGS} -L$__opencl_lib_dir"
  450. fi
  451. AC_HAVE_LIBRARY([OpenCL],[have_valid_opencl=yes],[have_valid_opencl=no])
  452. unset ac_cv_lib_OpenCL_main
  453. if test "$have_valid_opencl" = "no" ; then
  454. if test "$3" = "no" -a "$__opencl_dir" != "no" ; then
  455. __opencl_lib_dir="$__opencl_dir/lib64"
  456. LDFLAGS="${SAVED_LDFLAGS} -L$__opencl_lib_dir"
  457. AC_HAVE_LIBRARY([OpenCL],[have_valid_opencl=yes],[have_valid_opencl=no])
  458. unset ac_cv_lib_OpenCL_main
  459. fi
  460. fi
  461. fi
  462. if test "$have_valid_opencl" = "yes" -a "$__opencl_include_dir" != "no"; then
  463. STARPU_OPENCL_CPPFLAGS="-I$__opencl_include_dir"
  464. AC_CHECK_HEADERS([CL/cl_ext.h])
  465. fi
  466. CPPFLAGS="${SAVED_CPPFLAGS}"
  467. LDFLAGS="${SAVED_LDFLAGS}"
  468. if test "$have_valid_opencl" = "yes" ; then
  469. if test "$__opencl_lib_dir" != "no"; then
  470. STARPU_OPENCL_LDFLAGS="-L$__opencl_lib_dir"
  471. fi
  472. STARPU_OPENCL_LDFLAGS="${STARPU_OPENCL_LDFLAGS} -lOpenCL"
  473. fi
  474. ])
  475. #AC_MSG_CHECKING(whether OpenCL is available)
  476. AC_ARG_WITH(opencl-dir,
  477. [AS_HELP_STRING([--with-opencl-dir=<path>],
  478. [specify OpenCL installation directory])],
  479. [
  480. opencl_dir="$withval"
  481. # in case this was not explicit yet
  482. enable_opencl=yes
  483. ], opencl_dir=no)
  484. AC_ARG_WITH(opencl-include-dir,
  485. [AS_HELP_STRING([--with-opencl-include-dir=<path>],
  486. [specify where OpenCL headers are installed])],
  487. [
  488. opencl_include_dir="$withval"
  489. # in case this was not explicit yet
  490. enable_opencl=yes
  491. ], [opencl_include_dir=no])
  492. AC_ARG_WITH(opencl-lib-dir,
  493. [AS_HELP_STRING([--with-opencl-lib-dir=<path>],
  494. [specify where OpenCL libraries are installed])],
  495. [
  496. opencl_lib_dir="$withval"
  497. # in case this was not explicit yet
  498. enable_opencl=yes
  499. ], [opencl_lib_dir=no])
  500. if test x$enable_opencl = xyes -o x$enable_opencl = xmaybe; then
  501. STARPU_CHECK_OPENCL($opencl_dir, $opencl_include_dir, $opencl_lib_dir)
  502. if test "$have_valid_opencl" = "no" ; then
  503. for f in "/usr/local/cuda" "/c/cuda" "/cygdrive/c/cuda" "/opt/cuda" "$CUDA_INC_PATH" "$CUDA_INSTALL_PATH" ; do
  504. if test -n $f ; then
  505. STARPU_CHECK_OPENCL($f, "no", "no")
  506. if test "$have_valid_opencl" = "yes" ; then
  507. break
  508. fi
  509. fi
  510. done
  511. fi
  512. # in case OpenCL was explicitely required, but is not available, this is an error
  513. if test x$enable_opencl = xyes -a x$have_valid_opencl = no; then
  514. AC_MSG_ERROR([cannot find OpenCL])
  515. fi
  516. # now we enable OpenCL if and only if a proper setup is available
  517. enable_opencl=$have_valid_opencl
  518. fi
  519. AC_MSG_CHECKING(whether OpenCL should be used)
  520. AC_MSG_RESULT($enable_opencl)
  521. AC_SUBST(STARPU_USE_OPENCL, $enable_opencl)
  522. AM_CONDITIONAL(STARPU_USE_OPENCL, test x$enable_opencl = xyes)
  523. if test x$enable_opencl = xyes ; then
  524. AC_DEFINE(STARPU_USE_OPENCL, [1], [OpenCL support is activated])
  525. STARPU_OPENCL_CPPFLAGS="${STARPU_OPENCL_CPPFLAGS} -DSTARPU_OPENCL_DATADIR=${datarootdir}/starpu/opencl"
  526. AC_SUBST(STARPU_OPENCL_DATAdir, "$(eval echo ${datarootdir}/starpu/opencl/examples)")
  527. AC_SUBST(STARPU_OPENCL_CPPFLAGS)
  528. AC_SUBST(STARPU_OPENCL_LDFLAGS)
  529. fi
  530. ###############################################################################
  531. # #
  532. # Cell settings #
  533. # #
  534. ###############################################################################
  535. #TODO fix the default dir
  536. AC_ARG_ENABLE(gordon, [AS_HELP_STRING([--enable-gordon],
  537. [use Cell SPUs])],, enable_gordon=maybe)
  538. if test x$enable_gordon = xyes -o x$enable_gordon = xmaybe; then
  539. AC_ARG_WITH(gordon-dir, [AS_HELP_STRING([--with-gordon-dir=<path>],
  540. [specify Gordon installation directory (default is /usr/local/)])],
  541. [
  542. gordon_dir="$withval"
  543. enable_gordon=yes
  544. ], gordon_dir=/usr/local/)
  545. # do we have a valid Gordon setup ?
  546. have_valid_gordon=yes
  547. # can we use dynamic code loading facilities ?
  548. AC_CHECK_LIB(elf, elf_memory,, [have_valid_gordon=no])
  549. AC_CHECK_LIB(spe2, spe_context_create,,[have_valid_gordon=no])
  550. AC_CHECK_FUNC(spe_in_mbox_write, [], [have_valid_gordon=no])
  551. PKG_PROG_PKG_CONFIG
  552. if test -d "$gordon_dir"; then
  553. PKG_CONFIG_PATH="${PKG_CONFIG_PATH}:$gordon_dir"
  554. fi
  555. AC_SUBST(PKG_CONFIG_PATH)
  556. PKG_CHECK_MODULES([GORDON], [libgordon], [], have_valid_gordon=no)
  557. CPPFLAGS="${CPPFLAGS} ${GORDON_CFLAGS}"
  558. LIBS="${LIBS} ${GORDON_LIBS}"
  559. # AC_CHECK_FUNC(gordon_init, [gordon], [have_valid_gordon=no])
  560. # in case Gordon was explicitely required, but is not available, this is an error
  561. if test x$enable_gordon = xyes -a x$have_valid_gordon = no; then
  562. AC_MSG_ERROR([cannot find Gordon])
  563. fi
  564. # now we enable Gordon if and only if a proper setup is available
  565. enable_gordon=$have_valid_gordon
  566. fi
  567. AC_MSG_CHECKING(whether GORDON should be used)
  568. AC_MSG_RESULT($enable_gordon)
  569. AC_SUBST(STARPU_USE_GORDON, $enable_gordon)
  570. AM_CONDITIONAL(STARPU_USE_GORDON, test x$enable_gordon = xyes)
  571. if test x$enable_gordon = xyes; then
  572. AC_DEFINE(STARPU_USE_GORDON, [1], [Cell support is enabled])
  573. GORDON_REQUIRES=gordon
  574. fi
  575. AC_SUBST(GORDON_REQUIRES)
  576. AC_MSG_CHECKING(whether blocking drivers should be disabled)
  577. AC_ARG_ENABLE(blocking-drivers, [AS_HELP_STRING([--disable-blocking-drivers], [disable blocking drivers])],
  578. enable_blocking=$enableval, enable_blocking=$enable_gordon)
  579. AC_MSG_RESULT($enable_blocking)
  580. if test x$enable_blocking = xno; then
  581. AC_DEFINE(STARPU_NON_BLOCKING_DRIVERS, [1], [drivers must progress])
  582. fi
  583. ###############################################################################
  584. # #
  585. # Debug and Performance analysis tools #
  586. # #
  587. ###############################################################################
  588. AC_MSG_CHECKING(whether debug mode should be enabled)
  589. AC_ARG_ENABLE(debug, [AS_HELP_STRING([--enable-debug], [enable debug mode])],
  590. enable_debug=$enableval, enable_debug=no)
  591. AC_MSG_RESULT($enable_debug)
  592. if test x$enable_debug = xyes; then
  593. CFLAGS="$CFLAGS -O0"
  594. AC_DEFINE(STARPU_SPINLOCK_CHECK, [1], [check spinlock use])
  595. else
  596. CFLAGS="$CFLAGS -O3"
  597. fi
  598. CFLAGS+=" -gdwarf-2 -g3 "
  599. AC_MSG_CHECKING(whether extra checks should be performed)
  600. AC_ARG_ENABLE(fast, [AS_HELP_STRING([--enable-fast],
  601. [do not enforce assertions])],
  602. enable_fast=$enableval, enable_fast=no)
  603. AC_MSG_RESULT($enable_fast)
  604. if test x$enable_fast = xyes; then
  605. AC_DEFINE(STARPU_NO_ASSERT, [1], [disable assertions])
  606. fi
  607. AC_MSG_CHECKING(whether memory status should be displayed)
  608. AC_ARG_ENABLE(memory-status, [AS_HELP_STRING([--enable-memory-status],
  609. [display memory status at the end of execution])],
  610. enable_memory_status=$enableval, enable_memory_status=no)
  611. AC_MSG_RESULT($enable_memory_status)
  612. if test x$enable_memory_status = xyes; then
  613. AC_DEFINE(STARPU_MEMORY_STATUS, [1], [display memory status])
  614. fi
  615. AC_MSG_CHECKING(whether debug messages should be displayed)
  616. AC_ARG_ENABLE(verbose, [AS_HELP_STRING([--enable-verbose],
  617. [display verbose debug messages])],
  618. enable_verbose=$enableval, enable_verbose=no)
  619. AC_MSG_RESULT($enable_verbose)
  620. if test x$enable_verbose = xyes; then
  621. AC_DEFINE(STARPU_VERBOSE, [1], [display verbose debug messages])
  622. fi
  623. AC_MSG_CHECKING(whether coverage testing should be enabled)
  624. AC_ARG_ENABLE(coverage, [AS_HELP_STRING([--enable-coverage],
  625. [enable coverage checking])],
  626. enable_coverage=$enableval, enable_coverage=no)
  627. AC_MSG_RESULT($enable_coverage)
  628. AC_SUBST(COVERAGE, $enable_coverage)
  629. AM_CONDITIONAL(STARPU_COVERAGE_ENABLED, [test "x$enable_coverage" = "xyes"])
  630. if test x$enable_coverage = xyes; then
  631. CPPFLAGS="${CPPFLAGS} --coverage"
  632. LDFLAGS="${LDFLAGS} --coverage"
  633. fi
  634. # shall we use FxT to generate trace of the execution ?
  635. AC_MSG_CHECKING(whether FxT traces should be generated)
  636. AC_ARG_WITH(fxt, [AS_HELP_STRING([--with-fxt[=<dir>]], [generate fxt traces])],
  637. [
  638. if test x$withval != xno; then
  639. use_fxt=yes
  640. if test x$withval = xyes; then
  641. AC_MSG_RESULT(yes)
  642. use_fxt_from_system=yes
  643. else
  644. # use specified path
  645. # TODO check if the dir is actually containing FxT
  646. use_fxt_from_system=no
  647. fxtdir=$withval
  648. AC_MSG_RESULT(yes using $fxtdir)
  649. AC_SUBST(FXTDIR, $fxtdir)
  650. fi
  651. else
  652. use_fxt=no
  653. AC_MSG_RESULT(no)
  654. fi
  655. ],
  656. [
  657. use_fxt=no
  658. AC_MSG_RESULT(no)
  659. ])
  660. AC_SUBST(STARPU_USE_FXT, $use_fxt)
  661. AM_CONDITIONAL(STARPU_USE_FXT, test x$use_fxt = xyes)
  662. if test x$use_fxt = xyes; then
  663. AC_DEFINE(STARPU_USE_FXT, [1], [enable FxT traces])
  664. AC_DEFINE(CONFIG_FUT, [1], [enable FUT traces])
  665. if test x$use_fxt_from_system = xno; then
  666. CPPFLAGS="${CPPFLAGS} -I$fxtdir/include/ "
  667. LDFLAGS="${LDFLAGS} -L$fxtdir/lib/ -lfxt"
  668. else
  669. PKG_CHECK_MODULES([FXT], [fxt])
  670. fi
  671. # if we use monotonic clocks, FxT uses -lrt
  672. AC_CHECK_LIB(rt, clock_gettime,,AC_MSG_ERROR([cannot find clock_gettime]))
  673. fi
  674. AC_MSG_CHECKING(whether performance debugging should be enabled)
  675. AC_ARG_ENABLE(perf-debug, [AS_HELP_STRING([--enable-perf-debug],
  676. [enable performance debugging through gprof])],
  677. enable_perf_debug=$enableval, enable_perf_debug=no)
  678. AC_MSG_RESULT($enable_perf_debug)
  679. AC_SUBST(STARPU_PERF_DEBUG, $enable_perf_debug)
  680. if test x$enable_perf_debug = xyes; then
  681. AC_DEFINE(STARPU_PERF_DEBUG, [1], [enable performance debug])
  682. CPPFLAGS="${CPPFLAGS} -pg -fprofile-arcs "
  683. LDFLAGS="${LDFLAGS} -pg -fprofile-arcs "
  684. fi
  685. AC_MSG_CHECKING(whether performance model debugging should be enabled)
  686. AC_ARG_ENABLE(model-debug, [AS_HELP_STRING([--enable-model-debug],
  687. [enable performance model debugging])],
  688. enable_model_debug=$enableval, enable_model_debug=no)
  689. AC_MSG_RESULT($enable_model_debug)
  690. if test x$enable_model_debug = xyes; then
  691. AC_DEFINE(STARPU_MODEL_DEBUG, [1], [enable performance model debug])
  692. fi
  693. AC_MSG_CHECKING(whether statistics should be generated)
  694. AC_ARG_ENABLE(stats, [AS_HELP_STRING([--enable-stats],
  695. [enable statistics])],
  696. enable_stats=$enableval, enable_stats=no)
  697. AC_MSG_RESULT($enable_stats)
  698. AC_SUBST(STATS, $enable_stats)
  699. AC_SUBST(STARPU_DATA_STATS, $enable_stats)
  700. if test x$enable_stats = xyes; then
  701. AC_DEFINE(STARPU_DATA_STATS, [1], [enable statistics])
  702. fi
  703. AC_CHECK_HEADERS([glpk.h])
  704. STARPU_HAVE_LIBRARY(GLPK, [glpk])
  705. ###############################################################################
  706. # #
  707. # Miscellaneous options for StarPU #
  708. # #
  709. ###############################################################################
  710. AC_MSG_CHECKING(how many buffers can be manipulated per task)
  711. AC_ARG_ENABLE(maxbuffers, [AS_HELP_STRING([--enable-maxbuffers=<nbuffers>],
  712. [maximum number of buffers per task])],
  713. nmaxbuffers=$enableval, nmaxbuffers=8)
  714. AC_MSG_RESULT($nmaxbuffers)
  715. AC_DEFINE_UNQUOTED(STARPU_NMAXBUFS, [$nmaxbuffers],
  716. [how many buffers can be manipulated per task])
  717. # We have one memory node shared by all CPU workers, one node per GPU, and
  718. # currently the Cell driver is using the same memory node as the CPU.
  719. maxnodes=1
  720. if test x$enable_cuda = xyes ; then
  721. # we could have used nmaxcudadev + 1, but this would certainly give an
  722. # odd number.
  723. maxnodes=`expr $maxnodes + $nmaxcudadev`
  724. fi
  725. if test x$enable_opencl = xyes ; then
  726. # we could have used nmaxcudadev + 1, but this would certainly give an
  727. # odd number.
  728. maxnodes=`expr $maxnodes + $nmaxopencldev`
  729. fi
  730. # todo: set maxnodes to the next power of 2 greater than maxnodes
  731. AC_MSG_CHECKING(maximum number of memory nodes)
  732. AC_MSG_RESULT($maxnodes)
  733. AC_DEFINE_UNQUOTED(STARPU_MAXNODES, [$maxnodes],
  734. [maximum number of memory nodes])
  735. AC_MSG_CHECKING(whether allocation cache should be used)
  736. AC_ARG_ENABLE(allocation-cache, [AS_HELP_STRING([--enable-allocation-cache],
  737. [enable data allocation cache])],
  738. enable_allocation_cache=$enableval, enable_allocation_cache=no)
  739. AC_MSG_RESULT($enable_allocation_cache)
  740. if test x$enable_allocation_cache = xyes; then
  741. AC_DEFINE(STARPU_USE_ALLOCATION_CACHE, [1], [enable data allocation cache])
  742. fi
  743. AC_ARG_WITH(perf-model-dir, [AS_HELP_STRING([--with-perf-model-dir=<dir>], [specify where performance models shoulds be stored])],
  744. [
  745. if test x$withval = xno; then
  746. AC_MSG_ERROR(--without-perf-model-dir is not a valid option)
  747. fi
  748. perf_model_dir="$withval"
  749. have_explicit_perf_model_dir=yes
  750. AC_DEFINE_UNQUOTED(STARPU_PERF_MODEL_DIR, ["$perf_model_dir"], [performance models location])
  751. ], [
  752. # by default, we put the performance models in
  753. # $HOME/.starpu/sampling/
  754. have_explicit_perf_model_dir=no
  755. perf_model_dir="\$HOME/.starpu/sampling/"
  756. ]
  757. )
  758. AC_MSG_CHECKING(using explicit performance model location)
  759. AC_MSG_RESULT($have_explicit_perf_model_dir)
  760. AC_MSG_CHECKING(performance models location)
  761. AC_MSG_RESULT($perf_model_dir)
  762. # On many multicore CPUs, clock cycles are not synchronized
  763. AC_CHECK_LIB([rt], [clock_gettime])
  764. AC_CHECK_FUNCS([clock_gettime])
  765. # Compute the maximum number of workers (we round it to 16 for alignment
  766. # purposes).
  767. nmaxworkers=`expr 16 \* \( \( $maxcpus + $nmaxcudadev + $nmaxopencldev + 15 \) / 16 \) `
  768. AC_MSG_CHECKING(Maximum number of workers)
  769. AC_MSG_RESULT($nmaxworkers)
  770. AC_DEFINE_UNQUOTED(STARPU_NMAXWORKERS, [$nmaxworkers], [Maximum number of workers])
  771. # Computes the maximum number of implementations per arch
  772. AC_MSG_CHECKING(maximum number of implementations)
  773. AC_ARG_ENABLE(maximplementations, [AS_HELP_STRING([--enable-maximplementations=<number>],
  774. [maximum number of implementations])],
  775. maximplementations=$enableval, maximplementations=4)
  776. AC_MSG_RESULT($maximplementations)
  777. AC_DEFINE_UNQUOTED(STARPU_MAXIMPLEMENTATIONS, [$maximplementations],
  778. [maximum number of implementations])
  779. ###############################################################################
  780. # #
  781. # MPI #
  782. # #
  783. ###############################################################################
  784. AC_ARG_WITH(mpicc, [AS_HELP_STRING([--with-mpicc[=<path to mpicc>]],
  785. [Path of the mpicc compiler])],
  786. [
  787. if test x$withval = xyes; then
  788. AC_MSG_ERROR(--with-mpicc must be given a pathname)
  789. else
  790. mpicc_path=$withval
  791. fi
  792. ],
  793. [
  794. # nothing was specified: default value is used
  795. AC_PATH_PROG(mpicc_path, mpicc, [no], [])
  796. ])
  797. # We test if the MPICC compiler exists
  798. if test ! -x $mpicc_path; then
  799. #MPICC does not exists or is not executable
  800. AC_MSG_RESULT(The mpicc compiler is not valid)
  801. use_mpi=no
  802. else
  803. use_mpi=yes
  804. fi
  805. AC_MSG_CHECKING(mpicc path)
  806. AC_MSG_RESULT($mpicc_path)
  807. AC_SUBST(MPICC, $mpicc_path)
  808. if test x$use_mpi = xyes; then
  809. cc_or_mpicc=$mpicc_path
  810. else
  811. cc_or_mpicc=$CC
  812. fi
  813. AC_SUBST(CC_OR_MPICC, $cc_or_mpicc)
  814. # If the user specifically asks for it, or if we are in a developer checkout, we enable mpi check
  815. AC_ARG_ENABLE(mpi-check, AC_HELP_STRING([--enable-mpi-check], [Enable execution of MPI testcases]))
  816. running_mpi_check=0
  817. if test -d "$srcdir/.svn" ; then
  818. running_mpi_check=yes
  819. fi
  820. if test x$enable_mpi_check = xyes ; then
  821. running_mpi_check=yes
  822. fi
  823. if test x$enable_mpi_check = xno ; then
  824. running_mpi_check=no
  825. fi
  826. # Check if mpiexec is available
  827. AC_ARG_WITH(mpiexec, [AS_HELP_STRING([--with-mpiexec[=<path to mpiexec>]],
  828. [Path of mpiexec])],
  829. [
  830. if test x$withval = xyes; then
  831. AC_MSG_ERROR(--with-mpiexec must be given a pathname)
  832. else
  833. mpiexec_path=$withval
  834. fi
  835. ],
  836. [
  837. # nothing was specified: look in the path
  838. AC_PATH_PROG(mpiexec_path, mpiexec, [no], [$(dirname $mpicc_path):$PATH])
  839. ])
  840. AC_MSG_CHECKING(whether mpiexec is available)
  841. AC_MSG_RESULT($mpiexec_path)
  842. # We test if MPIEXEC exists
  843. if test ! -x $mpiexec_path; then
  844. #MPIEXEC does not exists or is not executable
  845. AC_MSG_RESULT(The mpiexec script is not valid)
  846. running_mpi_check=no
  847. mpiexec_path=""
  848. fi
  849. AM_CONDITIONAL(STARPU_MPI_CHECK, test x$running_mpi_check = xyes)
  850. if test x$use_mpi = xyes; then
  851. AC_MSG_CHECKING(whether MPI tests should be run)
  852. AC_MSG_RESULT($running_mpi_check)
  853. AC_SUBST(MPIEXEC,$mpiexec_path)
  854. fi
  855. AC_MSG_CHECKING(whether the StarPU MPI library should be generated)
  856. AC_MSG_RESULT($use_mpi)
  857. AC_SUBST(USE_MPI, $use_mpi)
  858. AM_CONDITIONAL(USE_MPI, test x$use_mpi = xyes)
  859. if test x$use_mpi = xyes; then
  860. AC_DEFINE(STARPU_USE_MPI,[],[whether the StarPU MPI library is available])
  861. fi
  862. ###############################################################################
  863. # #
  864. # StarPU-Top #
  865. # #
  866. ###############################################################################
  867. build_starpu_top=no
  868. AC_PATH_PROGS([QMAKE], [qmake-qt4 qmake], [not-found])
  869. if test x$QMAKE != xnot-found; then
  870. QMAKE_VERSION=`$QMAKE --version 2>&1 | head -n 1 | cut -d '.' -f 1 | cut -d ' ' -f 3`
  871. if test $QMAKE_VERSION -ge 2 ; then
  872. PKG_CHECK_EXISTS([QtGui QtNetwork QtOpenGL QtSql], [
  873. QT_MAJVERSION=`$PKG_CONFIG --modversion QtGui | cut -d '.' -f 1`
  874. QT_MINVERSION=`$PKG_CONFIG --modversion QtGui | cut -d '.' -f 2`
  875. if test $QT_MAJVERSION -gt 4 -o \( $QT_MAJVERSION -eq 4 -a $QT_MINVERSION -ge 7 \) ; then
  876. build_starpu_top=yes
  877. fi
  878. QWT_PRI=embed
  879. AC_ARG_WITH(qwt-include-dir,
  880. [AS_HELP_STRING([--with-qwt-include-dir=<path>],
  881. [specify installed libqwt include path])],
  882. [
  883. STARPU_QWT_CPPFLAGS="-I$withval"
  884. AC_SUBST(STARPU_QWT_CPPFLAGS)
  885. QWT_PRI=system
  886. ])
  887. AC_ARG_WITH(qwt-lib-dir,
  888. [AS_HELP_STRING([--with-qwt-lib-dir=<path>],
  889. [specify installed libqwt library path])],
  890. [
  891. STARPU_QWT_LDFLAGS="-L$withval"
  892. QWT_PRI=system
  893. ])
  894. AC_ARG_WITH(qwt-lib,
  895. [AS_HELP_STRING([--with-qwt-lib=<name>],
  896. [specify installed libqwt library name])],
  897. [
  898. STARPU_QWT_LDFLAGS="${STARPU_QWT_LDFLAGS} -l$withval"
  899. QWT_PRI=system
  900. ])
  901. AC_SUBST(QWT_PRI)
  902. ])
  903. fi
  904. fi
  905. AM_CONDITIONAL(BUILD_STARPU_TOP, test x$build_starpu_top = xyes)
  906. ###############################################################################
  907. # #
  908. # Flags for C Compiler #
  909. # #
  910. ###############################################################################
  911. # IS_SUPPORTED_CFLAG(flag)
  912. # ------------------------
  913. # Check if the CFLAGS `flag' is supported by the compiler
  914. AC_DEFUN([IS_SUPPORTED_CFLAG],
  915. [
  916. AC_REQUIRE([AC_PROG_CC])
  917. AC_MSG_CHECKING([whether compiler support $1])
  918. SAVED_CFLAGS="$CFLAGS"
  919. CFLAGS="$1 -we10006"
  920. AC_COMPILE_IFELSE(
  921. AC_LANG_PROGRAM(
  922. [[]],
  923. [[
  924. AC_LANG_SOURCE([
  925. const char *hello = "Hello World";
  926. ])
  927. ]]
  928. ),
  929. [
  930. GLOBAL_AM_CFLAGS="$GLOBAL_AM_CFLAGS $1"
  931. AC_MSG_RESULT(yes)
  932. ],
  933. AC_MSG_RESULT(no)
  934. )
  935. CFLAGS="$SAVED_CFLAGS"
  936. ])
  937. IS_SUPPORTED_CFLAG(-W)
  938. IS_SUPPORTED_CFLAG(-Wall)
  939. IS_SUPPORTED_CFLAG(-Wextra)
  940. AC_SUBST(GLOBAL_AM_CFLAGS)
  941. if test "x$STARPU_DEVEL" != x; then
  942. AC_DEFINE(STARPU_DEVEL, [1], [enable developer warnings])
  943. fi
  944. ###############################################################################
  945. # #
  946. # GCC extensions #
  947. # #
  948. ###############################################################################
  949. AC_ARG_ENABLE([gcc-extensions],
  950. [AS_HELP_STRING([--enable-gcc-extensions],
  951. [build the GCC plug-in that provides C language extensions (experimental)])],
  952. [enable_gcc_plugin="$enableval"],
  953. [enable_gcc_plugin="no"])
  954. if test "x$enable_gcc_plugin" = "xyes"; then
  955. STARPU_GCC_PLUGIN_SUPPORT
  956. if test "x$ac_cv_have_gcc_plugins" != "xyes"; then
  957. AC_MSG_ERROR([This compiler lacks GCC plug-in support.])
  958. fi
  959. build_gcc_plugin="yes"
  960. # GNU Guile 1.8/2.0 is used to run the test suite.
  961. AC_PATH_PROG([GUILE], [guile])
  962. if test "x$GUILE" != "x"; then
  963. run_gcc_plugin_test_suite="yes"
  964. else
  965. run_gcc_plugin_test_suite="no"
  966. fi
  967. else
  968. build_gcc_plugin="no"
  969. run_gcc_plugin_test_suite="no"
  970. fi
  971. # Bison is used to generate the C expression parser. The generated
  972. # parser is part of the distribution, though.
  973. AC_PROG_YACC
  974. AM_CONDITIONAL([BUILD_GCC_PLUGIN], [test "x$build_gcc_plugin" = "xyes"])
  975. AM_CONDITIONAL([HAVE_GUILE], [test "x$GUILE" != "x"])
  976. ###############################################################################
  977. # #
  978. # OpenCL interface #
  979. # #
  980. ###############################################################################
  981. AC_ARG_ENABLE([socl],
  982. [AS_HELP_STRING([--enable-socl],
  983. [build the OpenCL interface (SOCL)])],
  984. [enable_socl="$enableval"],
  985. [enable_socl="no"])
  986. if test "x$enable_socl" = "xyes"; then
  987. STARPU_SOCL_SUPPORT
  988. build_socl="yes"
  989. else
  990. build_socl="no"
  991. run_socl_test_suite="no"
  992. fi
  993. AM_CONDITIONAL([BUILD_SOCL], [test "x$build_socl" = "xyes"])
  994. AM_CONDITIONAL([STARPU_USE_SOCL], [test "x$build_socl" = "xyes"])
  995. ###############################################################################
  996. # #
  997. # Examples #
  998. # #
  999. ###############################################################################
  1000. AC_ARG_ENABLE(opengl-render, [AS_HELP_STRING([--enable-opengl-render],
  1001. [enable OpenGL rendering of some examples])],
  1002. enable_opengl_render=$enableval, enable_opengl_render=no)
  1003. if test x$enable_opengl_render = xyes; then
  1004. STARPU_CHECK_LIB(OPENGL_RENDER, glut, glutInit,,AC_MSG_ERROR([cannot find glut]))
  1005. STARPU_CHECK_LIB(OPENGL_RENDER, GL, glXCreateContext,,AC_MSG_ERROR([cannot find GL]))
  1006. STARPU_CHECK_LIB(OPENGL_RENDER, GLU, gluLookAt,,AC_MSG_ERROR([cannot find GLU]))
  1007. AC_DEFINE(STARPU_OPENGL_RENDER, [1], [enable OpenGL rendering of some examples])
  1008. fi
  1009. AC_MSG_CHECKING(whether OpenGL rendering is enabled)
  1010. AC_SUBST(STARPU_OPENGL_RENDER, $enable_opengl_render)
  1011. AC_MSG_RESULT($enable_opengl_render)
  1012. AC_PATH_XTRA
  1013. if test "x$x_includes" != "xNONE"; then
  1014. AC_DEFINE(STARPU_HAVE_X11, [1], [enable X11])
  1015. fi
  1016. AM_CONDITIONAL([HAVE_X11], [test "x$x_includes" != "xNONE"])
  1017. # In case there are BLAS kernels that are used by the example applications
  1018. # we may specify which library to use. Note that this is not used for StarPU
  1019. # itself.
  1020. blas_lib=maybe
  1021. AC_ARG_ENABLE(blas-lib,
  1022. [ --enable-blas-lib[=blaslibname]:
  1023. none [default]: no BLAS lib is used
  1024. atlas: use ATLAS library
  1025. goto: use GotoBLAS library],
  1026. [
  1027. if test "x$enableval" = "xatlas" ; then
  1028. blas_lib=atlas
  1029. elif test "x$enableval" = "xgoto" ; then
  1030. blas_lib=goto
  1031. elif test "x$enableval" = "xnone" ; then
  1032. blas_lib=none
  1033. elif test x$enableval = xno; then
  1034. blas_lib=none
  1035. else
  1036. echo
  1037. echo "Error!"
  1038. echo "Unknown BLAS library"
  1039. exit -1
  1040. fi
  1041. ])
  1042. if test x$blas_lib = xmaybe -o x$blas_lib = xgoto; then
  1043. AC_ARG_WITH(goto-dir, [AS_HELP_STRING([--with-goto-dir=<dir>], [specify GotoBLAS lib location])],
  1044. [
  1045. blas_lib=goto
  1046. gotodir=$withval
  1047. AC_SUBST(GOTODIR, $gotodir)
  1048. CPPFLAGS="${CPPFLAGS} -I$gotodir/ "
  1049. LDFLAGS="${LDFLAGS} -L$gotodir/ "
  1050. ]
  1051. )
  1052. if test x$blas_lib = xgoto; then
  1053. STARPU_CHECK_LIB(BLAS, gfortran, main,,)
  1054. # Perhaps that GotoBLAS2 is available instead (so that we have libgotoblas2.{so,a})
  1055. STARPU_CHECK_LIB(BLAS, goto2, sgemm_,, [havegoto2=no], [$STARPU_BLAS_LDFLAGS])
  1056. if test x$havegoto2 = xno; then
  1057. STARPU_CHECK_LIB(BLAS, goto, sgemm_,,AC_MSG_ERROR([cannot find goto lib]), [$STARPU_BLAS_LDFLAGS])
  1058. fi
  1059. AC_DEFINE(STARPU_GOTO, [1], [use STARPU_GOTO library])
  1060. fi
  1061. fi
  1062. if test x$blas_lib = xmaybe -o x$blas_lib = xatlas; then
  1063. AC_ARG_WITH(atlas-dir, [AS_HELP_STRING([--with-atlas-dir=<dir>], [specify ATLAS lib location])],
  1064. [
  1065. AC_MSG_CHECKING(STARPU_ATLAS location)
  1066. blas_lib=atlas
  1067. atlasdir=$withval
  1068. AC_MSG_RESULT($atlasdir)
  1069. AC_SUBST(ATLASDIR, $atlasdir)
  1070. CPPFLAGS="${CPPFLAGS} -I$atlasdir/include/ "
  1071. LDFLAGS="${LDFLAGS} -L$atlasdir/lib/ "
  1072. ]
  1073. )
  1074. if test x$blas_lib = xatlas; then
  1075. # test whether STARPU_ATLAS is actually available
  1076. AC_CHECK_HEADER([cblas.h],,AC_MSG_ERROR([cannot find atlas headers]))
  1077. STARPU_CHECK_LIB(BLAS, atlas, ATL_sgemm,,AC_MSG_ERROR([cannot find atlas lib]),)
  1078. STARPU_CHECK_LIB(BLAS, cblas, cblas_sgemm,,AC_MSG_ERROR([cannot find atlas lib]),[-latlas])
  1079. AC_DEFINE(STARPU_ATLAS, [1], [use STARPU_ATLAS library])
  1080. fi
  1081. fi
  1082. if test x$blas_lib = xmaybe; then
  1083. # Should we use MKL ?
  1084. AC_ARG_WITH(mkl-cflags, [AS_HELP_STRING([--with-mkl-cflags], [specify MKL compilation flags])],
  1085. [
  1086. CPPFLAGS="${CPPFLAGS} $withval"
  1087. blas_lib=mkl
  1088. ])
  1089. AC_ARG_WITH(mkl-ldflags, [AS_HELP_STRING([--with-mkl-ldflags], [specify MKL linking flags])],
  1090. [
  1091. LDFLAGS="${LDFLAGS} $withval"
  1092. blas_lib=mkl
  1093. ])
  1094. if test x$blas_lib = xmkl; then
  1095. AC_DEFINE(STARPU_MKL, [1], [use MKL library])
  1096. fi
  1097. fi
  1098. if test x$blas_lib = xmaybe; then
  1099. #perhaps it is possible to use some BLAS lib from the system
  1100. use_system_blas=no
  1101. STARPU_SEARCH_LIBS(BLAS,[sgemm_],[blas],use_system_blas=yes,,)
  1102. if test x$use_system_blas = xyes; then
  1103. AC_DEFINE(STARPU_SYSTEM_BLAS, [1], [use refblas library])
  1104. blas_lib=system
  1105. else
  1106. blas_lib=none
  1107. fi
  1108. fi
  1109. AM_CONDITIONAL(ATLAS_BLAS_LIB, test x$blas_lib = xatlas)
  1110. AM_CONDITIONAL(GOTO_BLAS_LIB, test x$blas_lib = xgoto)
  1111. AM_CONDITIONAL(MKL_BLAS_LIB, test x$blas_lib = xmkl)
  1112. AM_CONDITIONAL(SYSTEM_BLAS_LIB, test x$blas_lib = xsystem)
  1113. AM_CONDITIONAL(NO_BLAS_LIB, test x$blas_lib = xnone)
  1114. AC_MSG_CHECKING(which BLAS lib should be used)
  1115. AC_MSG_RESULT($blas_lib)
  1116. AC_SUBST(BLAS_LIB,$blas_lib)
  1117. ##########################################
  1118. # FFT #
  1119. ##########################################
  1120. have_fftw=no
  1121. have_fftwf=no
  1122. have_fftwl=no
  1123. PKG_CHECK_MODULES([FFTW], [fftw3], [
  1124. AC_DEFINE([STARPU_HAVE_FFTW], [1], [Define to 1 if you have the libfftw3 library.])
  1125. AC_SUBST([STARPU_HAVE_FFTW], [1])
  1126. have_fftw=yes
  1127. ], [:])
  1128. AM_CONDITIONAL(STARPU_HAVE_FFTW, [test x$have_fftw = xyes])
  1129. PKG_CHECK_MODULES([FFTWF], [fftw3f], [
  1130. AC_DEFINE([STARPU_HAVE_FFTWF], [1], [Define to 1 if you have the libfftw3f library.])
  1131. AC_SUBST([STARPU_HAVE_FFTWF], [1])
  1132. have_fftwf=yes
  1133. ], [:])
  1134. AM_CONDITIONAL(STARPU_HAVE_FFTWF, [test x$have_fftwf = xyes])
  1135. PKG_CHECK_MODULES([FFTWL], [fftw3l], [
  1136. AC_DEFINE([STARPU_HAVE_FFTWL], [1], [Define to 1 if you have the libfftw3l library.])
  1137. AC_SUBST([HAVE_FFTWFL], [1])
  1138. have_fftwl=yes
  1139. ], [:])
  1140. AM_CONDITIONAL(STARPU_HAVE_FFTWL, [test x$have_fftwl = xyes])
  1141. ##########################################
  1142. # hwloc #
  1143. ##########################################
  1144. AC_ARG_WITH([hwloc], [AS_HELP_STRING([--without-hwloc], [Disable hwloc (enabled by default)])])
  1145. SAVED_LDFLAGS="${LDFLAGS}"
  1146. SAVED_CPPFLAGS="${CPPFLAGS}"
  1147. AS_IF([test "x$with_hwloc" != "xno"], [
  1148. PKG_CHECK_MODULES([HWLOC],[hwloc], [
  1149. have_valid_hwloc=yes
  1150. have_pkgconfig_hwloc=yes], [
  1151. have_valid_hwloc=no
  1152. have_pkgconfig_hwloc=no])
  1153. AS_IF([test "$have_valid_hwloc" = "no"], [
  1154. hwloc_dir="$withval"
  1155. CPPFLAGS="${SAVED_CPPFLAGS} -I$hwloc_dir/include"
  1156. AC_CHECK_HEADER([hwloc.h],[have_valid_hwloc=yes],[have_valid_hwloc=no])
  1157. LDFLAGS="${SAVED_LDFLAGS} -L$hwloc_dir/lib"
  1158. AC_HAVE_LIBRARY([hwloc],[have_valid_hwloc=yes],[have_valid_hwloc=no])
  1159. ])
  1160. ],
  1161. have_valid_hwloc="no")
  1162. AS_IF([test "$have_valid_hwloc" = "yes"], [
  1163. AC_DEFINE([STARPU_HAVE_HWLOC], [1], [Define to 1 if you have the hwloc library.])
  1164. HWLOC_REQUIRES=hwloc
  1165. AC_SUBST([STARPU_HAVE_HWLOC], [1])
  1166. AS_IF([test "$have_pkgconfig_hwloc" = "no"], [
  1167. HWLOC_CFLAGS="-I$hwloc_dir/include"
  1168. HWLOC_LIBS="-L$hwloc_dir/lib -lhwloc"])
  1169. ])
  1170. LDFLAGS="${SAVED_LDFLAGS}"
  1171. CPPFLAGS="${SAVED_CPPFLAGS}"
  1172. AC_MSG_CHECKING(whether hwloc should be used)
  1173. AC_MSG_RESULT($have_valid_hwloc)
  1174. AC_SUBST(HWLOC_REQUIRES)
  1175. # is the header file f77.h available ?
  1176. have_f77_h=yes
  1177. AC_CHECK_HEADER([f77.h],,[have_f77_h=no])
  1178. AC_MSG_CHECKING(whether header file f77.h is available)
  1179. AC_MSG_RESULT($have_f77_h)
  1180. AC_SUBST(STARPU_HAVE_F77_H, $have_f77_h)
  1181. AM_CONDITIONAL(STARPU_HAVE_F77_H, test x$have_f77_h = xyes)
  1182. if test x$have_f77_h = xyes; then
  1183. AC_DEFINE([STARPU_HAVE_F77_H], [1], [Define to 1 if you have the <f77.h> header file.])
  1184. fi
  1185. # Do we want to run optional tests
  1186. AC_MSG_CHECKING(whether optional tests should be run)
  1187. AC_ARG_ENABLE(optional_tests, [AS_HELP_STRING([--optional-tests],
  1188. [run optional tests])],
  1189. want_optional_tests=$enableval, want_optional_tests=no)
  1190. AC_MSG_RESULT($want_optional_tests)
  1191. AM_CONDITIONAL([COND_OPT], [test "$want_optional_tests" = yes])
  1192. # File configuration
  1193. AC_CONFIG_COMMANDS([executable-scripts], [
  1194. chmod +x tests/regression/regression.sh
  1195. chmod +x gcc-plugin/tests/run-test
  1196. ])
  1197. AC_CONFIG_FILES(tests/regression/regression.sh tests/regression/profiles tests/regression/profiles.build.only)
  1198. AC_CONFIG_HEADER(src/common/config.h include/starpu_config.h gcc-plugin/src/starpu-gcc-config.h)
  1199. AC_OUTPUT([
  1200. Makefile
  1201. src/Makefile
  1202. tools/Makefile
  1203. socl/Makefile
  1204. socl/src/Makefile
  1205. libstarpu.pc
  1206. libstarpumpi.pc
  1207. examples/Makefile
  1208. examples/opt/Makefile
  1209. examples/starpufft/Makefile
  1210. examples/stencil/Makefile
  1211. examples/socl/Makefile
  1212. tests/Makefile
  1213. tests/opt/Makefile
  1214. doc/Makefile
  1215. mpi/Makefile
  1216. starpu-top/StarPU-Top.pro
  1217. gcc-plugin/Makefile
  1218. gcc-plugin/src/Makefile
  1219. gcc-plugin/tests/Makefile
  1220. gcc-plugin/tests/run-test
  1221. gcc-plugin/examples/Makefile
  1222. ])
  1223. AC_MSG_NOTICE([
  1224. CPUs enabled: $enable_cpu
  1225. CUDA enabled: $enable_cuda
  1226. OpenCL enabled: $enable_opencl
  1227. Cell enabled: $enable_gordon
  1228. GCC plug-in: $build_gcc_plugin
  1229. GCC plug-in test suite: $run_gcc_plugin_test_suite
  1230. Compile-time limits
  1231. (change these with --enable-maxcpus, --enable-maxcudadev,
  1232. --enable-maxopencldev, --enable-maxbuffers)
  1233. Maximum number of CPUs: $maxcpus
  1234. Maximum number of CUDA devices: $nmaxcudadev
  1235. Maximum number of OpenCL devices: $nmaxopencldev
  1236. Maximum number of memory nodes: $maxnodes
  1237. Maximum number of task buffers: $nmaxbuffers
  1238. GPU-GPU transfers: $have_cuda_memcpy_peer
  1239. Allocation cache: $enable_allocation_cache
  1240. MPI enabled: $use_mpi
  1241. SOCL enabled: $build_socl
  1242. Magma enabled: $have_magma
  1243. BLAS library: $blas_lib
  1244. hwloc: $have_valid_hwloc
  1245. FxT trace enabled: $use_fxt
  1246. StarPU-Top: $build_starpu_top
  1247. ])