/* StarPU --- Runtime system for heterogeneous multicore architectures. * * Copyright (C) 2013-2020 Université de Bordeaux, CNRS (LaBRI UMR 5800), Inria * Copyright (C) 2013 Corentin Salingue * * StarPU is free software; you can redistribute it and/or modify * it under the terms of the GNU Lesser General Public License as published by * the Free Software Foundation; either version 2.1 of the License, or (at * your option) any later version. * * StarPU is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * * See the GNU Lesser General Public License in COPYING.LGPL for more details. */ /*! \page OutOfCore Out Of Core \section OutOfCore_Introduction Introduction When using StarPU, one may need to store more data than what the main memory (RAM) can store. This part describes the method to add a new memory node on a disk and to use it. Similarly to what happens with GPUs (it's actually exactly the same code), when available main memory becomes scarse, StarPU will evict unused data to the disk, thus leaving room for new allocations. Whenever some evicted data is needed again for a task, StarPU will automatically fetch it back from the disk. The principle is that one first registers a disk location, seen by StarPU as a void*, which can be for instance a Unix path for the \c stdio, \c unistd or \c unistd_o_direct backends, or a leveldb database for the \c leveldb backend, an HDF5 file path for the \c HDF5 backend, etc. The \c disk backend opens this place with the plug() method. StarPU can then start using it to allocate room and store data there with the disk write method, without user intervention. The user can also use starpu_disk_open() to explicitly open an object within the disk, e.g. a file name in the \c stdio or \c unistd cases, or a database key in the \c leveldb case, and then use starpu_*_register functions to turn it into a StarPU data handle. StarPU will then use this file as external source of data, and automatically read and write data as appropriate. In any case, the user also needs to set \ref STARPU_LIMIT_CPU_MEM to the amount of data that StarPU will be allowed to afford. By default StarPU will use the machine memory size, but part of it is taken by the kernel, the system, daemons, and the application's own allocated data, whose size can not be predicted. That is why the user needs to specify what StarPU can afford. Some Out-of-core tests are worth giving a read, see tests/disk/*.c \section UseANewDiskMemory Use a new disk memory To use a disk memory node, you have to register it with this function: \code{.c} int new_dd = starpu_disk_register(&starpu_disk_unistd_ops, (void *) "/tmp/", 1024*1024*200); \endcode Here, we use the \c unistd library to realize the read/write operations, i.e. \c fread/\c fwrite. This structure must have a path where to store files, as well as the maximum size the software can afford storing on the disk. Don't forget to check if the result is correct! This can also be achieved by just setting environment variables \ref STARPU_DISK_SWAP, \ref STARPU_DISK_SWAP_BACKEND and \ref STARPU_DISK_SWAP_SIZE : \verbatim export STARPU_DISK_SWAP=/tmp export STARPU_DISK_SWAP_BACKEND=unistd export STARPU_DISK_SWAP_SIZE=200 \endverbatim The backend can be set to \c stdio (some caching is done by \c libc and the kernel), \c unistd (only caching in the kernel), \c unistd_o_direct (no caching), \c leveldb, or \c hdf5. It is important to understand that when the backend is not set to \c unistd_o_direct, some caching will occur at the kernel level (the page cache), which will also consume memory... \ref STARPU_LIMIT_CPU_MEM might need to be set to less that half of the machine memory just to leave room for the kernel's page cache, otherwise the kernel will struggle to get memory. Using \c unistd_o_direct avoids this caching, thus allowing to set \ref STARPU_LIMIT_CPU_MEM to the machine memory size (minus some memory for normal kernel operations, system daemons, and application data). When the register call is made, StarPU will benchmark the disk. This can take some time. Warning: the size thus has to be at least \ref STARPU_DISK_SIZE_MIN bytes ! StarPU will then automatically try to evict unused data to this new disk. One can also use the standard StarPU memory node API to prefetch data etc., see the \ref API_Standard_Memory_Library and the \ref API_Data_Interfaces. The disk is unregistered during the starpu_shutdown(). \section OOCDataRegistration Data Registration StarPU will only be able to achieve Out-Of-Core eviction if it controls memory allocation. For instance, if the application does the following: \code{.c} p = malloc(1024*1024*sizeof(float)); fill_with_data(p); starpu_matrix_data_register(&h, STARPU_MAIN_RAM, (uintptr_t) p, 1024, 1024, 1024, sizeof(float)); \endcode StarPU will not be able to release the corresponding memory since it's the application which allocated it, and StarPU can not know how, and thus how to release it. One thus have to use the following instead: \code{.c} starpu_matrix_data_register(&h, -1, NULL, 1024, 1024, 1024, sizeof(float)); starpu_task_insert(cl_fill_with_data, STARPU_W, h, 0); \endcode Which makes StarPU automatically do the allocation when the task running cl_fill_with_data gets executed. And then if its needs to, it will be able to release it after having pushed the data to the disk. Since no initial buffer is provided to starpu_matrix_data_register(), the handle does not have any initial value right after this call, and thus the very first task using the handle needs to use the ::STARPU_W mode like above, ::STARPU_R or ::STARPU_RW would not make sense. By default, StarPU will try to push any data handle to the disk. To specify whether a given handle should be pushed to the disk, starpu_data_set_ooc_flag() should be used. \section OOCWontUse Using Wont Use By default, StarPU uses a Least-Recently-Used (LRU) algorithm to determine which data should be evicted to the disk. This algorithm can be hinted by telling which data will no be used in the coming future thanks to starpu_data_wont_use(), for instance: \code{.c} starpu_task_insert(&cl_work, STARPU_RW, h, 0); starpu_data_wont_use(h); \endcode StarPU will mark the data as "inactive" and tend to evict to the disk that data rather than others. \section ExampleDiskCopy Examples: disk_copy \snippet disk_copy.c To be included. You should update doxygen if you see this text. \section ExampleDiskCompute Examples: disk_compute \snippet disk_compute.c To be included. You should update doxygen if you see this text. \section Performances Scheduling heuristics for Out-of-core are still relatively experimental. The tricky part is that you usually have to find a compromise between privileging locality (which avoids back and forth with the disk) and privileging the critical path, i.e. taking into account priorities to avoid lack of parallelism at the end of the task graph. It is notably better to avoid defining different priorities to tasks with low priority, since that will make the scheduler want to schedule them by levels of priority, at the depense of locality. The scheduling algorithms worth trying are thus dmdar and lws, which privilege data locality over priorities. There will be work on this area in the coming future. \section FeedBackFigures Feedback Figures Beyond pure performance feedback, some figures are interesting to have a look at. Using export STARPU_BUS_STATS=1 (\ref STARPU_BUS_STATS and \ref STARPU_BUS_STATS_FILE to define a filename in which to display statistics, by default the standard error stream is used) gives an overview of the data transfers which were needed. The values can also be obtained at runtime by using starpu_bus_get_profiling_info(). An example can be read in src/profiling/profiling_helpers.c. \verbatim #--------------------- Data transfer speed for /tmp/sthibault-disk-DJzhAj (node 1): 0 -> 1: 99 MB/s 1 -> 0: 99 MB/s 0 -> 1: 23858 µs 1 -> 0: 23858 µs #--------------------- TEST DISK MEMORY #--------------------- Data transfer stats: Disk 0 -> NUMA 0 0.0000 GB 0.0000 MB/s (transfers : 0 - avg -nan MB) NUMA 0 -> Disk 0 0.0625 GB 63.6816 MB/s (transfers : 2 - avg 32.0000 MB) Total transfers: 0.0625 GB #--------------------- \endverbatim Using export STARPU_ENABLE_STATS=1 gives information for each memory node on data miss/hit and allocation miss/hit. \verbatim #--------------------- MSI cache stats : memory node NUMA 0 hit : 32 (66.67 %) miss : 16 (33.33 %) memory node Disk 0 hit : 0 (0.00 %) miss : 0 (0.00 %) #--------------------- #--------------------- Allocation cache stats: memory node NUMA 0 total alloc : 16 cached alloc: 0 (0.00 %) memory node Disk 0 total alloc : 8 cached alloc: 0 (0.00 %) #--------------------- \endverbatim \section DiskFunctions Disk functions There are various ways to operate a disk memory node, described by the structure starpu_disk_ops. For instance, the variable #starpu_disk_unistd_ops uses read/write functions. All structures are in \ref API_Out_Of_Core. */