/*
 * This file is part of the StarPU Handbook.
 * Copyright (C) 2014, 2016 INRIA
 * See the file version.doxy for copying conditions.
 */

/*! \page NativeFortranSupport The StarPU Native Fortran Support

StarPU provides the necessary routines and support to natively access
most of its functionalities from Fortran 2008+ codes.

All symbols (functions, constants) are defined in <c>fstarpu_mod.f90</c>.
Every symbol of the Native Fortran support API is prefixed by
<c>fstarpu_</c>. 

Note: Mixing uses of <c>fstarpu_</c> and <c>starpu_</c>
symbols in the same Fortran code has unspecified behaviour.
See \ref APIMIX for a discussion about valid and unspecified
combinations.

\section Implementation Implementation Details and Specificities

\subsection Prerequisites Prerequisites

The Native Fortran support relies on Fortran 2008 specific constructs
for which no equivalent are available in previous versions of the
standard. It has currently been tested successfully with GNU GFortran >=
4.9 and the Intel Fortran Compiler >= 2016.

\subsection Configuration Configuration

The Native Fortran API is enabled and its companion
<c>fstarpu_mod.f90</c> Fortran module source file is installed
by default when a Fortran compiler is found, unless the detected Fortran
compiler is known not to support the requirements for the Native Fortran
API. The support can be disabled through the configure option \ref
disable-fortran "--disable-fortran". Conditional compiled source codes
may check for the availability of the Native Fortran Support by testing
whether the preprocessor macro <c>STARPU_HAVE_FC</c> is defined or not.

\subsection Examples Examples

Several examples using the Native Fortran API are provided in
StarPU's <c>examples/native_fortran/</c> examples directory, to showcase
the Fortran flavor of various basic and more advanced StarPU features.

\subsection AppCompile Compiling a Native Fortran Application

The Fortran module <c>fstarpu_mod.f90</c> installed in StarPU's
<c>include/</c> directory provides all the necessary API definitions. It
must be compiled with the same compiler (same vendor, same version) as
the application itself, and the resulting <c>fstarpu_mod.o</c> object
file must linked with the application executable.

Each example provided in StarPU's <c>examples/native_fortran/</c>
examples directory comes with its own dedicated Makefile for out-of-tree
build. Such example Makefiles may be used as starting points for
building application codes with StarPU.

\section Idioms Fortran Translation for Common StarPU API Idioms

All these examples assume that the standard Fortran module <c>iso_c_binding</c>
is in use.

- Specifying a NULL pointer
\code{.f90}
        type(c_ptr) :: my_ptr  ! variable to store the pointer
        ! [...]
        my_ptr = C_NULL_PTR    ! assign standard constant for NULL ptr
\endcode
- Obtaining a pointer to some object:
\code{.f90}
        real(8), dimension(:), allocatable, target :: va
        type(c_ptr) :: p_va  ! variable to store a pointer to array va
        ! [...]
        p_va = c_loc(va)
\endcode
- Obtaining a pointer to some subroutine:
\code{.f90}
        ! pointed routine definition
        recursive subroutine myfunc () bind(C)
        ! [...]
        type(c_funptr) :: p_fun  ! variable to store the routine pointer
        ! [...]
        p_fun = c_funloc(my_func)
\endcode
- Obtaining the size of some object:
\code{.f90}
        real(8) :: a
        integer(c_size_t) :: sz_a  ! variable to store the size of a
        ! [...]
        sz_a = c_sizeof(a)
\endcode
- Obtaining the length of an array dimension:
\code{.f90}
        real(8), dimension(:,:), allocatable, target :: vb
        intger(c_int) :: ln_vb_1  ! variable to store the length of vb's dimension 1
        intger(c_int) :: ln_vb_2  ! variable to store the length of vb's dimension 2
        ! [...]
        ln_vb_1 = 1+ubound(vb,1)-lbound(vb,1)  ! get length of dimension 1 of vb
        ln_vb_2 = 1+ubound(vb,2)-lbound(vb,2)  ! get length of dimension 2 of vb
\endcode
- Specifying a string constant:
\code{.f90}
        type(c_ptr) :: my_cl  ! a StarPU codelet
        ! [...]

        ! set the name of a codelet to string 'my_codele't:
        call fstarpu_codelet_set_name(my_cl, C_CHAR_"my_codelet"//C_NULL_CHAR)

        ! note: using the C_CHAR_ prefix and the //C_NULL_CHAR concatenation at the end ensures
        ! that the string constant is properly '\0' terminated, and compatible with StarPU's
        ! internal C routines
        !
        ! note: plain Fortran string constants are not '\0' terminated, and as such, must not be
        ! passed to StarPU routines.
\endcode

- Combining multiple flag constants with a bitwise 'or':
\code{.f90}
        type(c_ptr) :: my_cl  ! a pointer for the codelet structure
        ! [...]

        ! add a managed buffer to a codelet, specifying both the Read/Write access mode and the Locality hint
        call fstarpu_codelet_add_buffer(my_cl, FSTARPU_RW.ior.FSTARPU_LOCALITY)
\endcode

\section InitExit Uses, Initialization and Shutdown

The snippet below show an example of minimal StarPU code using the
Native Fortran support. The program should <c>use</c> the standard
module <c>iso_c_binding</c> as well as StarPU's <c>fstarpu_mod</c>. The
StarPU runtime engine is initialized with a call to function
<c>fstarpu_init</c>, which returns an integer status of 0 if successful
or non-0 otherwise. Eventually, a call to <c>fstarpu_shutdown</c> ends
the runtime engine and frees all internal StarPU data structures.

\snippet nf_initexit.f90 To be included. You should update doxygen if you see this text.

\section InsertTask Fortran Flavor of StarPU's Variadic Insert_task

Fortran does not have a construction similar to C variadic functions on which
<c>starpu_insert_task</c> relies at the time of this writing. However, Fortran's variable
length arrays of <c>c_ptr</c> elements enable to emulate much of the
convenience of C's variadic functions. This is the approach retained for
implementing <c>fstarpu_insert_task</c>.

The general syntax for using <c>fstarpu_insert_task</c> is as follows:
\code{.f90}
        call fstarpu_insert_task((/ <codelet ptr>       &
            [, <access mode flags>, <data handle>]*     &
            [, <argument type constant>, <argument>]*   &
            , C_NULL_PTR /))
\endcode

There is thus a unique array argument <c>(/ ... /)</c> passed to
<c>fstarpu_insert_task</c> which itself contains the task settings.
Each element of the array must be of type <c>type(c_ptr)</c>.
The last element of the array must be <c>C_NULL_PTR</c>.

Example extracted from nf_vector.f90:
\code{.f90}
        call fstarpu_insert_task((/ cl_vec,          &    ! codelet
            FSTARPU_R, dh_va,                        &    ! a first data handle
            FSTARPU_RW.ior.FSTARPU_LOCALITY, dh_vb,  &    ! a second data handle
            C_NULL_PTR /))                                ! no more args
\endcode

\section Structs Functions and Subroutines Expecting Data Structures Arguments

Several StarPU structures that are expected to be passed to the C API,
are replaced by function/subroutine wrapper sets to allocate, set fields
and free such structure. This strategy has been prefered over defining
native Fortran equivalent of such structures using Fortran's derived
types, to avoid potential layout mismatch between C and Fortran StarPU
data structures. Examples of such data structures wrappers include
<c>fstarpu_conf_allocate</c> and alike, <c>fstarpu_codelet_allocate</c>
and alike, <c>fstarpu_data_filter_allocate</c> and alike.

Here is an example of allocating, filling and deallocating a codelet
structure:
\code{.f90}
        ! a pointer for the codelet structure
        type(c_ptr) :: cl_vec
        ! [...]
        ! allocate an empty codelet structure
        cl_vec = fstarpu_codelet_allocate()
        ! add a CPU implementation function to the codelet
        call fstarpu_codelet_add_cpu_func(cl_vec, C_FUNLOC(cl_cpu_func_vec))
        ! set the codelet name
        call fstarpu_codelet_set_name(cl_vec, C_CHAR_"my_vec_codelet"//C_NULL_CHAR)
        ! add a Read-only mode data buffer to the codelet
        call fstarpu_codelet_add_buffer(cl_vec, FSTARPU_R)
        ! add a Read-Write mode data buffer to the codelet
        call fstarpu_codelet_add_buffer(cl_vec, FSTARPU_RW.ior.FSTARPU_LOCALITY)
        ! [...]
        ! free codelet structure
        call fstarpu_codelet_free(cl_vec)
\endcode

\section Notes Additional notes about the Native Fortran support
\subsection OldFortran Using StarPU with older Fortran compilers

When using older compilers, Fortran applications may still interoperate
with StarPU using C marshalling functions as exemplified in StarPU's
<c>examples/fortran/</c> and <c>examples/fortran90/</c> example
directories, though the process will be less convenient.

\subsection APIMIX Valid API Mixes and Language Mixes

Mixing uses of
<c>fstarpu_</c> and <c>starpu_</c> symbols in the same
Fortran code has unspecified behaviour. Using <c>fstarpu_</c>
symbols in C code has unspecified behaviour.

For multi-language applications using both C and Fortran source files:

- C source files must use <c>starpu_</c> symbols exclusively
- Fortran sources must uniformly use either <c>fstarpu_</c> symbols
exclusively, or <c>starpu_</c> symbols exclusively. Every other
combination has unspecified behaviour.

*/